SRRN151800

2018/9/5 SRRN Series - Basic information 6-positions Vertical Type SRRN Series Number of wafer 1 Poles 2 Positions 5 Changeover angle 30±3° Changeover timing Non shorting Rotational torque 70±30mN·m Actuator configuration Round Actuator length L: 20mm Operating temperature range -30℃ to +65℃ Rating (max.)/(min.) (Resistive load) 0.15A 12V DC/50µA 3V DC Electrical performance Contact resistance (Initial performance/After lifetime) 50mΩ max./100mΩ max. Insulation resistance 100MΩ min. 500V DC Voltage proof 500V AC for 1 minute Terminal strength 5N for 1 minute Mechanical performance Actuator strength Wobble of actuator (load at the tip of shaft: 5N) Rotational direction 1N·m Push direction 100N Measuring position from mounting surface 15mm Shaft wobble (max. 0.25mm max. value) Applicable mounting 20mm dimension Durability Operating life without load 10,000 cycles 70mΩ max. Operating life with load (at max. rated 10,000 cycles 100mΩ max. https://www.alps.com/prod/info/E/HTML/Switch/Rotary/SRRN/SRRN151800.html 1/4 2018/9/5 SRRN Series - Basic information load) Environmental performance Cold -40±2℃ for 96h Dry heat 85±2℃ for 96h Damp heat 40±2℃, 90 to 95%RH for 96h Minimum order unit (pcs.) Japan 60 Export 240 Dimensions Terminal Configuration Circuit Diagram https://www.alps.com/prod/info/E/HTML/Switch/Rotary/SRRN/SRRN151800.html 2/4 2018/9/5 SRRN Series - Basic information 1. Standard poles per step. 2. The following mark in the above table indicate a stopper with the shaft turned fully counterclockwise when viewed from direction A of the diagrams. Packing Specifications Bulk Number of packages 1 case / Japan (pcs.) 1 case / export packing Export package measurements (mm) 60 240 400×270×270 Shaft Style * Round Shaft Attached Parts https://www.alps.com/prod/info/E/HTML/Switch/Rotary/SRRN/SRRN151800.html 3/4 2018/9/5 SRRN Series - Basic information The following parts are included with the product. Soldering Conditions Reference for Dip Soldering Items Dip soldering Preheating temperature - Preheating time - Soldering temperature 260±5℃ Duration of immersion 10±1s Reference for Hand Soldering Soldering temperature 350±10℃ Soldering time 3+1/0s Notes are common to this series/models. 1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply. 2. All the axis are cutting shafts. 3. Please place purchase orders per minimum order unit (integer). 4. Products other than those listed in the above chart are also available. Please contact us for details. https://www.alps.com/prod/info/E/HTML/Switch/Rotary/SRRN/SRRN151800.html 4/4