SSSF111800

2017/3/9 SSSF Series - Basic information 8.5(H)mm, 2.0mm-travel Type SSSF Series Part number SSSF111800 Travel 2mm Actuator directions Horizontal Actuator length 6mm Poles 1 Positions 2 Operating force Refer to the dimensions. Mounting method Snap-in (t1.6) Changeover timing Non shorting Soldering Manual, Dip Operating temperature range -40℃ to +85℃ Rating (max.)/(min.) (Resistive load) 0.1A 30V DC/10µA 1V DC Electrical performance Contact resistance (Initial performance/After lifetime) 25mΩ max./65mΩ max. Insulation resistance 100MΩ min. 500V DC Voltage proof 500V AC for 1 minute Terminal strength 5N for 1 minute Mechanical performance Actuator strength Durability Operating direction 30N Pulling direction 30N Operating life without load 10,000 cycles 45mΩ max. Operating life with load (at max. rated load) 10,000 cycles 65mΩ max. http://www.alps.com/prod/info/E/HTML/Switch/Slide/SSSF/SSSF111800.html 1/5 2017/3/9 Environmental performance SSSF Series - Basic information Cold -40℃ 500h Dry heat 85℃ 500h Damp heat 60℃, 90 to 95%RH 500h Minimum order unit (pcs.) Japan 100 Export 3,000 Photo Dimensions Mounting Hole Dimensions http://www.alps.com/prod/info/E/HTML/Switch/Slide/SSSF/SSSF111800.html 2/5 2017/3/9 SSSF Series - Basic information Viewed from direction A in the dimensions. Actuator Configuration Shape of Frame Leg http://www.alps.com/prod/info/E/HTML/Switch/Slide/SSSF/SSSF111800.html 3/5 2017/3/9 SSSF Series - Basic information Circuit Diagram Packing Specifications Bulk Number of packages 1 case / Japan (pcs.) 1 case / export 600 3,000 packing Export package measurements (mm) 400×270×290 Soldering Conditions Reference for Dip Soldering Items Preheating temperature http://www.alps.com/prod/info/E/HTML/Switch/Slide/SSSF/SSSF111800.html 100℃ max. 4/5 2017/3/9 Dip soldering SSSF Series - Basic information Preheating time 60℃ max. Soldering temperature 260±5℃ Duration of immersion 10±1s Reference for Hand Soldering Soldering temperature 350±10℃ Soldering time 3+1/0s Notes are common to this series/models. 1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply. 2. Please place purchase orders per minimum order unit (integer). 3. Products other than those listed in the above chart are also available. Please contact us for details. 4. Please contact us for automotive use products. http://www.alps.com/prod/info/E/HTML/Switch/Slide/SSSF/SSSF111800.html 5/5