ASM2P2309NZG-16-ST

June 2005 rev 0.2 Nine Output 3.3V Buffer Features Functional Description One-input to Nine-Output Buffer/Driver Supports two DIMMs or four SO-DIMMs with one additional output for feedback to an external or chipset PLL Low power consumption for mobile applications Less than 32mA at 66.6MHz with unloaded outputs 1nS Input-Output delay Buffers all frequencies from DC to 133.33MHz Output-output skew less than 250pS Multiple VDD and VSS pins for noise and electromagnetic interference (EMI) reduction Space-saving 16-pin 150-mil SOIC Package 3.3V operation Commercial and Industrial temperature parts are available ASM2P2309NZ The ASM2P2309NZ is a low-cost buffer designed to distribute high-speed clocks in mobile PC systems and desktop PC systems with SDRAM support. The part has nine outputs, eight of which can be used to drive two DIMMs or four SO-DIMMs, and the remaining can be used for external feedback to a PLL. The device operates at 3.3V and outputs can run up to 133.33MHz. The ASM2P2309NZ is designed for low EMI and power optimization. It has multiple VSS and VDD pins for noise optimization and consumes less than 32mA at 66.6MHz, making it ideal for the low-power requirements of mobile systems. It is available in an ultra-compact 150-mil 16-pin SOIC Package. Block Diagram BUF_IN OUTPUT1 OUTPUT2 OUTPUT3 OUTPUT4 OUTPUT5 OUTPUT6 OUTPUT7 OUTPUT8 OUTPUT9 Alliance Semiconductor 2575 Augustine Drive • Santa Clara, CA • Tel: 408.855.4900 • Fax: 408.855.4999 • www.alsc.com Notice: The information in this document is subject to change without notice. June 2005 rev 0.2 Pin Configuration ASM2P2309NZ BUF_IN OUTPUT1 OUTPUT2 VDD GND OUTPUT3 OUTPUT4 VDD 1 2 3 4 5 6 7 8 ASM2P2309NZ 16 15 14 13 12 11 10 9 OUTPUT9 OUTPUT8 OUTPUT7 VDD GND OUTPUT6 OUTPUT5 GND Pin Description Pin 4, 8, 13 5, 9, 12 1 2, 3, 6, 7, 10, 11, 14, 15, 16 VDD GND BUF_IN OUTPUT [1:9] Signal Ground Input Clock Outputs Description 3.3V Digital Voltage Supply Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 2 of 9 June 2005 rev 0.2 Absolute Maximum Ratings Parameter Supply Voltage to Ground Potential DC Input Voltage (Except BUF_IN) Storage Temperature Junction Temperature Static Discharge Voltage (As per JEDEC STD22- A114-B) ASM2P2309NZ Min -0.5 -0.5 -65 Max 7.0 VDD + 0.5 +150 150 >2000 Unit V V °C °C V Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can affect device reliability. Operating Conditions Parameter VDD TA CL CIN BUF_IN, OUTPUT [1:9] tPU Supply Voltage (Ambient Operating Temperature), Commercial (Ambient Operating Temperature), Industrial Load Capacitance, Fout < 100MHz Load Capacitance,100MHz < Fout < 133.33MHz Input Capacitance Operating Frequency Power-up time for all VDD's to reach minimum specified voltage (power ramps must be monotonic) Description Min 3.0 0 –40 DC 0.05 Max 3.6 70 85 30 15 7 133.33 50 Unit V °C °C pF pF pF MHz mS Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 3 of 9 June 2005 rev 0.2 Electrical Characteristics for Commercial and Industrial Temperature Devices Parameter VIL VIH IIL IIH VOL VOH IDD ASM2P2309NZ Description Input LOW Voltage 1 1 Test Conditions Min 2.0 Max 0.8 50.0 100.0 0.4 32 Unit V V MA MA V V mA Input HIGH Voltage Input LOW Current Input HIGH Current 2 Output LOW Voltage Output HIGH Voltage Supply Current 2 VIN = 0V VIN= VDD IOL= 8 mA IOH = –8 mA Unloaded outputs at 66.66MHz 3 2.4 - Switching Characteristics for Commercial and Industrial Temperature Devices Parameter tD t3 t4 t5 t6 Name Duty Cycle = t2 ÷t1 Rise Time Fall Time 2 2 2 2 Description Measured at 1.4V Measured between 0.8V and 2.0V Measured between 0.8V and 2.0V All outputs equally loaded Measured at VDD/2 Min 40.0 1 Typ 50.0 5 Max 60.0 1.50 1.50 250 9.2 Unit % nS nS pS nS Output to Output Skew Propagation Delay, BUF_IN Rising Edge to 2 OUTPUT Rising Edge Note: 1. BUF_IN input has a threshold voltage of VDD/2. 2. Parameter is guaranteed by design and characterization. It is not 100% tested in production. 3. All parameters specified with loaded outputs. Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 4 of 9 June 2005 rev 0.2 Switching Waveforms Duty Cycle Timing ASM2P2309NZ All Outputs Rise/Fall Time Output-Output Skew Input-Output Propagation Delay Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 5 of 9 June 2005 rev 0.2 Test Circuits ASM2P2309NZ VDD 0.1uF CLKOUT OUTPUTS VDD 0.1uF GND GND CLOAD Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 6 of 9 June 2005 rev 0.2 Package Information 16-lead (150 Mil) Molded SOIC Package ASM2P2309NZ 8 1 PIN 1 ID E H 9 D 16 Seating Plane A e B h A2 0.004 C L A1 D Inches Min Dimensions Symbol Millimeters Max 0.069 0.010 0.059 0.022 0.012 0.394 0.157 0.050 BSC 0.228 0.010 0.016 0° 0.244 0.016 0.035 8° 5.80 0.25 0.40 0° Min 1.35 0.10 1.25 0.33 0.19 9.80 3.80 1.27 BSC Max 1.75 0.25 1.50 0.53 0.27 10.01 4.00 A A1 A2 B C D E e H h L P 0.053 0.004 0.049 0.013 0.008 0.386 0.150 6.20 0.41 0.89 8° Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 7 of 9 June 2005 rev 0.2 Ordering Codes Part Number ASM2P2309NZF-16-ST ASM2P2309NZF-16-SR ASM2I2309NZF-16-ST ASM2I2309NZF-16-SR ASM2P2309NZG-16-ST ASM2P2309NZG-16-SR ASM2I2309NZG-16-ST ASM2I2309NZG-16-SR ASM2P2309NZ-16-ST ASM2P2309NZ-16-SR ASM2I2309NZ-16-ST ASM2I2309NZ-16-SR ASM2P2309NZ Marking 2P2309NZF 2P2309NZF 2I2309NZF 2I2309NZF 2P2309NZG 2P2309NZG 2I2309NZG 2I2309NZG 2P2309NZ 2P2309NZ 2I2309NZ 2I2309NZ Package Type 16-pin 150-mil SOIC, Pb Free 16-pin 150-mil SOIC, Tape and Reel, Pb Free 16-pin 150-mil SOIC, Pb Free 16-pin 150-mil SOIC, Tape and Reel, Pb Free 16-pin 150-mil SOIC, Green 16-pin 150-mil SOIC, Tape and Reel, Green 16-pin 150-mil SOIC, Green 16-pin 150-mil SOIC ,Tape and Reel, Green 16-pin 150-mil SOIC 16-pin 150-mil SOIC, Tape and Reel 16-pin 150-mil SOIC 16-pin 150-mil SOIC ,Tape and Reel Operating Range Commercial Commercial Industrial Industrial Commercial Commercial Industrial Industrial Commercial Commercial Industrial Industrial Device Ordering Information ASM2P2309NZ F-16-SR R = Tape & reel, T = Tube or Tray O = SOT S = SOIC T = TSSOP A = SSOP V = TVSOP B = BGA Q = QFN DEVICE PIN COUNT F = LEAD FREE AND RoHS COMPLIANT PART G = GREEN PACKAGE PART NUMBER X= Automotive I= Industrial P or n/c = Commercial (-40C to +125C) (-40C to +85C) (0C to +70C) 1= 2= 3= 4= 5= Reserved Non PLL based EMI Reduction DDR support products STD Zero Delay Buffer 6 = Power Management 7 = Power Management 8 = Power Management 9 = Hi Performance 0 = Reserved U = MSOP E = TQFP L = LQFP U = MSOP P = PDIP D = QSOP X = SC-70 ALLIANCE SEMICONDUCTOR MIXED SIGNAL PRODUCT Licensed under US patent #5,488,627, #6,646,463 and #5,631,920. Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 8 of 9 June 2005 rev 0.2 ASM2P2309NZ Alliance Semiconductor Corporation 2575 Augustine Drive, Santa Clara, CA 95054 Tel# 408-855-4900 Fax: 408-855-4999 www.alsc.com Copyright © Alliance Semiconductor All Rights Reserved Part Number: ASM2P2309NZ Document Version: 0.2 Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to Alliance Semiconductor, dated 11-11-2003 © Copyright 2003 Alliance Semiconductor Corporation. All rights reserved. Our three-point logo, our name and Intelliwatt are trademarks or registered trademarks of Alliance. All other brand and product names may be the trademarks of their respective companies. Alliance reserves the right to make changes to this document and its products at any time without notice. Alliance assumes no responsibility for any errors that may appear in this document. The data contained herein represents Alliance's best data and/or estimates at the time of issuance. Alliance reserves the right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. Alliance does not assume any responsibility or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties related to the sale and/or use of Alliance products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to in Alliance's Terms and Conditions of Sale (which are available from Alliance). All sales of Alliance products are made exclusively according to Alliance's Terms and Conditions of Sale. The purchase of products from Alliance does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual property rights of Alliance or third parties. Alliance does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of Alliance products in such life-supporting systems implies that the manufacturer assumes all risk of such use and agrees to indemnify Alliance against all claims arising from such use. Nine Output 3.3V Buffer Notice: The information in this document is subject to change without notice. 9 of 9