2227.0

Ferrules INDUSTRY STANDARD FERRULES Insulated Industry Standard Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. Altech’s standard insulated ferrules are color coded by conductor size for convenient identification. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 98.) • Sleeve: polypropylene • Tube: tin-plated copper CRIMPER SELECTOR GUIDE See page 109. 220672 Tested According To: CSA Std C22.2 No. 65-93 CSA Std C22.2 No. 188-M1983 ANSI/UL Std No. 486A ANSI/UL Std No. 486C - Wire Connectors - Splicing Wire and Cable Connectors - Wire Connectors and Soldering Lugs for Use with Copper Conductors - Splicing Wire Connectors Cat. Stripping Length AWG (mm2) Color 24 (.25) Lt. Blue H0.25/6 24 (.25) Lt. Blue 22 (.34) 22 (.34) 20 (.50) No. Ferrule Dimensions mm (in.) mm (in.) A 2620.0 6.0(.24) 10.0 (.39) H0.25/8 2621.0 8.0(.31) Turquoise H0.34/6 2622.0 6.0(.24) Turquoise H0.34/8 2623.0 Orange H0.50/6 2397.0 20 (.50) Orange H0.50/8 18 (.75) White H0.75/6 18 (.75) White 18 (1.00) Yellow 18 (1.00) 16 (1.50) B Std. C D 6.0 (.24) 1.2 (.05) 2.3 (.09) 500/100 12.0 (.47) 8.0 (.31) 1.2 (.05) 2.3 (.09) 500/100 10.0 (.39) 6.0 (.24) 1.2 (.05) 2.5 (.10) 500/100 8.0(.31) 12.0 (.47) 8.0 (.31) 1.2 (.05) 2.5 (.10) 500/100 6.0(.24) 12.0 (.47) 6.0 (.24) 1.3 (.05) 2.8 (.11) 500/100 2201.0 8.0(.31) 14.0 (.55) 8.0 (.31) 1.3 (.05) 2.8 (.11) 500/100 2398.0 6.0(.24) 12.0 (.47) 6.0 (.24) 1.5 (.06) 3.3 (.13) 500/100 H0.75/8 2202.0 8.0(.31) 14.0 (.55) 8.0 (.31) 1.5 (.06) 3.3 (.13) 500/100 H1.00/6 2399.0 6.0(.24) 12.0 (.47) 6.0 (.24) 1.7 (.07) 3.5 (.14) 500/100 Yellow H1.00/8 2203.0 8.0(.31) 14.0 (.55) 8.0 (.31) 1.7 (.07) 3.5 (.14) 500/100 Red H1.50/8 2204.0 8.0(.31) 14.0 (.55) 8.0 (.31) 2.0 (.08) 4.0 (.16) 500/100 16 (1.50) Red H1.50/10 2400.0 10.0(.39) 16.0 (.63) 10.0 (.39) 2.0 (.08) 4.0 (.16) 500/100 16 (1.50) Red H1.50/18 2205.0 18.0(.71) 24.0 (.94) 18.0 (.71) 2.0 (.08) 4.0 (.16) 500/100 14 (2.50) Blue H2.50/8 2206.0 8.0(.31) 14.0 (.55) 8.0 (.31) 2.5 (.10) 4.7 (.19) 500/100 14 (2.50) Blue H2.50/12 2401.0 12.0(.47) 18.0 (.71) 12.0 (.47) 2.5 (.10) 4.7 (.19) 500/100 14 (2.50) Blue H2.50/18 2207.0 18.0(.71) 24.0 (.94) 18.0 (.71) 2.5 (.10) 4.7 (.19) 500/100 12 (4.00) Gray H4.00/10 2208.0 10.0(.39) 17.0 (.67) 10.0 (.39) 3.2 (.13) 5.4 (.21) 500/100 12 (4.00) Gray H4.00/12 2402.0 12.0(.47) 20.0 (.79) 12.0 (.47) 3.2 (.13) 5.4 (.21) 500/100 12 (4.00) Gray H4.00/18 2209.0 18.0(.71) 26.0 (1.02) 18.0 (.71) 3.2 (.13) 5.4 (.21) 100 10 (6.00) Black H6.00/12 2210.0 12.0(.47) 20.0 (.79) 12.0 (.47) 3.9 (.15) 6.9 (.27) 100 10 (6.00) Black H6.00/18 2211.0 18.0(.71) 26.0 (1.02) 18.0 (.71) 3.9 (.15) 6.9 (.27) 100 8 (10.00) Ivory H10.0/12 2212.0 12.0(.47) 22.0 (.87) 12.0 (.47) 4.9 (.19) 8.4 (.33) 100 8 (10.00) Ivory H10.0/18 2213.0 18.0(.71) 28.0 (1.10) 18.0 (.71) 4.9 (.19) 8.4 (.33) 100 6 (16.00) Green H16.0/12 2214.0 12.0(.47) 24.0 (.94) 12.0 (.47) 6.2 (.24) 9.6 (.38) 100 6 (16.00) Green H16.0/18 2215.0 18.0(.71) 28.0 (1.10) 18.0 (.71) 6.2 (.24) 9.6 (.38) 100 4 (25.00) Brown H25.0/18 2267.0 18.0(.71) 30.0 (1.18) 18.0 (.71) 7.7 (.30) 12.0(.47) 50 4 (25.00) Brown H25.0/22 2272.0 22.0(.87) 36.0 (1.42) 22.0 (.87) 7.7 (.30) 12.0(.47) 50 2 (35.00) Beige H35.0/18 2276.0 18.0(.71) 30.0 (1.18) 18.0 (.71) 8.7 (.34) 13.5(.53) 50 2 (35.00) Beige H35.0/25 2390.0 25.0(.98) 39.0 (1.54) 25.0 (.98) 8.7 (.34) 13.5(.53) 50 1 (50.00) Olive H50.0/20 2500.0 20.0(.79) 36.0 (1.42) 20.0 (.79) 10.9(.43) 16.0(.63) 50 2/0 (70.00) Yellow H70.0/21 2786.0 20.0(.79) 37.0 (1.46) 20.0 (.79) 13.4(.53) 17.0(.67) 25 3/0 (95.00) Red H95.0/25 2787.0 25.0(.98) 44.0 (1.73) 25.0 (.98) 15.4(.61) 19.0(.75) 25 4/0 (120.00) Blue H120.0/27 2788.0 27.0(1.06) 48.0 (1.89) 27.0 (1.06) 17.6(.69) 22.4(.88) 25 H150.0/27 2789.0 32.0(1.26) 58.0 (2.28) 32.0 (1.26) 20.5(.81) 25.0(.98) 25 250MCM(150.0)Yellow Type Pk.* * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Type H0.25/6, Cat. No. 2620.0/100 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 105 Ferrules DIN STANDARD FERRULES Insulated DIN Standard Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. 220672 Tested According To: CSA Std C22.2 No. 65-93 CSA Std C22.2 No. 188-M1983 ANSI/UL Std No. 486A ANSI/UL Std No. 486C Cat. Stripping Length AWG (mm2) Color Type Altech’s DIN standard ferrules are in compliance with DIN requirements, making them ideal for export applications. They also have a specified color code convention that differs from the color code used for Altech’s industry standard ferrules. 20 (.50) White H0.50/6 20 (.50) White 20 (.50) White 18 (.75) 18 (.75) To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 98.) • Sleeve: polypropylene • Tube: tin plated copper CRIMPER SELECTOR GUIDE - Wire Connectors - Splicing Wire and Cable Connectors - Wire Connectors and Soldering Lugs for Use with Copper Conductors - Splicing Wire Connectors No. Ferrule Dimensions mm (in.) mm (in.) A 2863.0 6.0(.24) 12.0 (.47) H0.50/8 2864.0 8.0(.31) H0.50/10 2865.0 10.0(.39) Gray H0.75/6 2866.0 Gray H0.75/8 2867.0 18 (.75) Gray H0.75/10 18 (.75) Gray H0.75/12 18 (1.00) Red 18 (1.00) Red 18 (1.00) 18 (1.00) B Std. C D Pk.* 6.0 (.24) 1.3 (.05) 2.8 (.11) 500/100 14.0 (.55) 8.0 (.31) 1.3 (.05) 2.8 (.11) 500/100 16.0 (.63) 10.0 (.39) 1.3 (.05) 2.8 (.11) 500/100 6.0(.24) 12.0 (.47) 6.0 (.24) 1.5 (.06) 3.3 (.13) 500/100 8.0(.31) 14.0 (.55) 8.0 (.31) 1.5 (.06) 3.3 (.13) 500/100 2868.0 10.0(.39) 16.0 (.63) 10.0 (.39) 1.5 (.06) 3.3 (.13) 500/100 2869.0 12.0(.47) 18.0 (.71) 12.0 (.47) 1.5 (.06) 3.3 (.13) 500/100 H1.00/6 2870.0 6.0(.24) 12.0 (.47) 6.0 (.24) 1.7 (.07) 3.5 (.14) 500/100 H1.00/8 2871.0 8.0(.31) 14.0 (.55) 8.0 (.31) 1.7 (.07) 3.5 (.14) 500/100 Red H1.00/10 2872.0 10.0(.39) 16.0 (.63) 10.0 (.39) 1.7 (.07) 3.5 (.14) 500/100 Red H1.00/12 2840.0 12.0(.47) 18.0 (.71) 12.0 (.47) 1.7 (.07) 3.5 (.14) 500/100 16 (1.50) Black H1.50/8 2841.0 8.0(.31) 14.0 (.55) 8.0 (.31) 2.0 (.08) 4.0 (.16) 500/100 16 (1.50) Black H1.50/10 2842.0 10.0(.39) 16.0 (.63) 10.0 (.39) 2.0 (.08) 4.0 (.16) 500/100 16 (1.50) Black H1.50/12 2843.0 12.0(.47) 18.0 (.71) 12.0 (.47) 2.0 (.08) 4.0 (.16) 500/100 16 (1.50) Black H1.50/18 2844.0 18.0(.71) 24.0 (.94) 18.0 (.71) 2.0 (.08) 4.0 (.16) 500/100 14 (2.50) Blue H2.50/8 2845.0 8.0(.31) 14.0 (.55) 8.0 (.31) 2.5 (.10) 4.7 (.19) 500/100 14 (2.50) Blue H2.50/12 2846.0 12.0(.47) 18.0 (.71) 12.0 (.47) 2.5 (.10) 4.7 (.19) 500/100 14 (2.50) Blue H2.50/18 2847.0 18.0(.71) 24.0 (.94) 18.0 (.71) 2.5 (.10) 4.7 (.19) 500/100 12 (4.00) Gray H4.00/10 2848.0 10.0(.39) 17.0 (.71) 10.0 (.39) 3.2 (.13) 5.4 (.21) 500/100 12 (4.00) Gray H4.00/12 2849.0 12.0(.47) 20.0 (.79) 12.0 (.47) 3.2 (.13) 5.4 (.21) 500/100 12 (4.00) Gray H4.00/18 2850.0 18.0(.71) 26.0 (1.02) 18.0 (.71) 3.2 (.13) 5.4 (.21) 100 10 (6.00) Yellow H6.00/12 2851.0 12.0(.47) 20.0 (.79) 12.0 (.47) 3.9 (.16) 6.9 (.27) 100 10 (6.00) Yellow H6.00/18 2852.0 18.0(.71) 26.0 (1.02) 18.0 (.71) 3.9 (.16) 6.9 (.27) 100 8 (10.00) Red H10.00/12 2853.0 12.0(.47) 22.0 (.87) 12.0 (.47) 4.9 (.20) 8.4 (.33) 100 8 (10.00) Red H10.00/18 2854.0 18.0(.71) 28.0 (1.10) 18.0 (.71) 4.9 (.20) 8.4 (.33) 100 6 (16.00) Blue H16.00/12 2855.0 12.0(.47) 24.0 (.87) 12.0 (.47) 6.2 (.24) 9.6 (.38) 100 6 (16.00) Blue H16.00/18 2856.0 18.0(.71) 28.0 (1.10) 18.0 (.71) 6.2 (.24) 9.6 (.38) 100 4 (25.00) Yellow H25.00/18 2857.0 18.0(.71) 30.0 (1.18) 18.0 (.71) 7.7 (.30) 12.0(.47) 50 4 (25.00) Yellow H25.00/22 2858.0 22.0(.87) 36.0 (1.5) 22.0 (.87) 7.7 (.30) 12.0(.47) 50 2 (35.00) Red H35.00/18 2859.0 18.0(.71) 30.0 (1.18) 18.0 (.71) 8.7 (.34) 13.5(.53) 50 2(35.00) Red H35.00/25 2860.0 25.0(.98) 39.0 (1.54) 25.0 (.98) 8.7 (.34) 13.5(.53) 50 1 (50.00) Blue H50.00/20 2861.0 20.0(.79) 36.0 (1.5) 20.0 (.79) 10.9(.43) 16.0(.63) 50 See page 109. * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Type H0.50/6, Cat. No. 2863.0/100 106 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Ferrules UNINSULATED FERRULES Uninsulated Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Uninsulated ferrules prevent wire strands from fraying and breaking and are extremely cost effective. Their shorter lengths and uninsulated bodies offer advantages when making terminations in printed circuit board terminal blocks and in other terminal blocks with smaller clamps or narrow widths. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 109.) • Tube: tin plated copper 220672 Tested According To: CSA Std C22.2 No. 65-93 CSA Std C22.2 No. 188-M1983 ANSI/UL Std No. 486A ANSI/UL Std No. 486C - Wire Connectors - Splicing Wire and Cable Connectors - Wire Connectors and Soldering Lugs for Use with Copper Conductors - Splicing Wire Connectors AWG (mm2) Type Cat. No. Stripping Length mm (in.) Ferrule Dimensions mm (in.) A B C Std. Pk.* 20 (.50) H0.50/6 2216.0 6.0 (.24) 6.0 (.24) 1.3 (.05) 2.1 (.08) 1000/100 18 (.75) H0.75/6 2217.0 6.0 (.24) 6.0 (.24) 1.5 (.06) 2.3 (.09) 1000/100 18 (.75) H0.75/10 2218.0 10.0 (.39) 10.0 (.39) 1.5 (.06) 2.3 (.09) 1000/100 18 (1.00) H1.00/6 2219.0 6.0 (.24) 6.0 (.24) 1.7 (.07) 2.5 (.10) 1000/100 18 (1.00) H1.00/10 2220.0 10.0(.39) 10.0 (.39) 1.7 (.07) 2.5 (.10) 1000/100 16 (1.50) H1.50/7 2221.0 7.0 (.28) 7.0 (.28) 2.3 (.09) 2.8 (.11) 1000/100 16 (1.50) H1.50/10 2222.0 10.0 (.39) 10.0 (.39) 2.3 (.09) 2.8 (.11) 1000/100 14 (2.50) H2.50/7 2223.0 7.0 (.28) 7.0 (.28) 2.5 (.10) 3.4 (.13) 1000/100 14 (2.50) H2.50/12 2224.0 12.0 (.47) 12.0 (.47) 2.5 (.10) 3.4 (.13) 1000/100 12 (4.00) H4.00/9 2225.0 9.0 (.35) 9.0 (.35) 3.2 (.13) 4.0 (.16) 1000/100 12 (4.00) H4.00/12 2226.0 12.0 (.47) 12.0 (.47) 3.2 (.13) 4.0 (.16) 1000/100 10 (6.00) H6.00/12 2227.0 12.0 (.47) 12.0 (.47) 3.9 (.15) 4.7 (.19) 500/100 10 (6.00) H6.00/15 2388.0 15.0 (.59) 15.0 (.59) 3.9 (.15) 4.7 (.19) 500/100 8 (10.00) H10.00/12 2228.0 12.0 (.47) 12.0 (.47) 4.9 (.19) 5.8 (.23) 500/100 8 (10.00) H10.00/15 2389.0 15.0 (.59) 15.0 (.59) 4.9 (.19) 5.8 (.23) 500/100 8 (10.00) H10.00/18 2229.0 18.0 (.71) 18.0 (.71) 4.9 (.19) 5.8 (.23) 500/100 6 (16.00) H16.00/12 2391.0 12.0 (.47) 12.0 (.47) 6.2 (.24) 7.5 (.30) 500/100 6 (16.00) H16.00/15 2392.0 15.0 (.59) 15.0 (.59) 6.2 (.24) 7.5 (.30) 500/100 6 (16.00) H16.00/18 2393.0 18.0 (.71) 18.0 (.71) 6.2 (.24) 7.5 (.30) 100 4 (25.00) H25.00/15 2394.0 15.0 (.59) 15.0 (.59) 7.7 (.30) 9.5 (.37) 500/100 4 (25.00) H25.00/18 2395.0 18.0 (.71) 18.0 (.71) 7.7 (.30) 9.5 (.37) 100 2 (35.00) H35.00/18 2396.0 18.0 (.71) 18.0 (.71) 8.7 (.34) 11.0 (.43) 100 1 (50.00) H50.00/32 2816.0 32.0 (1.26) 32.0 (1.26) 10.9 (.43) 13.0 (.51) 100 2/0 (70.00) H70.00/25 2790.0 25.0 (0.98) 25.0 (.98) 13.3 (.52) 15.0 (.59) 100 3/0 (95.00) H95.00/32 2791.0 32.0 (1.26) 32.0 (1.26) 15.3 (.60) 17.0 (.67) 50 4/0 (120.00) H120.00/32 2792.0 32.0 (1.26) 32.0 (1.26) 17.5 (.69) 19.0 (.75) 25 250MCM(150.00) H150.00/32 2793.0 32.0 (1.26) 32.0 (1.26) 19.5 (.77) 21.0 (.83) 25 350MCM(185.00) H185.00/32 2815.0 32.0 (1.26) 32.0 (1.26) 21.2 (.83) 23.5 (.93) 25 CRIMPER SELECTOR GUIDE See page 109. * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Type H0.50/6, Cat. No. 2216.0/100 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 107 Ferrules Dual Wire Insulated Dual Wire Ferrules have larger diameters and special shaped sleeves that accept two conductors of the same or different size. They provide an efficient connection of multiple wires in the same terminal clamp or simplify wire jumpering between terminal clamps. They are color coded with the same convention as the insulated DIN standard ferrules. To ensure efficient ferrule crimping always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 109.) • Sleeve: polypropylene • Tube: tin plated copper DUAL WIRE FERRULES Tested According To: CSA Std C22.2 No. 65-93 CSA Std C22.2 No. 188-M1983 ANSI/UL Std No. 486A ANSI/UL Std No. 486C 220672 Wires x AWG Color (mm2) Type Cat. Stripping Length No. mm (in.) AB1-S AB2-S 108 A Ferrule Dimensions mm (in.) B C D1 D2 Std. Pk.* 2x20 (2x.50) White H2x0.50/8 2794.0 11.0 (.43) 14.6 (.57) 8.2 (.32) 1.7 (.07) 3.0 (.12) 5.0 (.20) 500/100 2x18 (2x.75) Gray 2775.0 11.0 (.43) 14.6 (.57) 8.2 (.32) 2.0 (.08) 3.0 (.12) 5.5 (.22) 500/100 H2x0.75/8 2x18 (2x.75) Gray H2x0.75/10 2795.0 13.0 (.51) 16.4 (.65) 10.0 (.39) 2.0 (.08) 3.0 (.12) 5.5 (.22) 500/100 2x18 (2x1.0) Red H2x1.00/8 2776.0 11.0 (.43) 15.4 (.61) 8.2 (.32) 2.4 (.09) 3.2 (.13) 5.8 (.23) 500/100 2x18 (2x1.0) Red H2x1.00/18 2x16 (2x1.5) Black H2x1.50/8 2796.0 21.0 (.83) 25.2 (.99) 18.0 (.71) 2.4 (.09) 3.2 (.13) 5.8 (.23) 500/100 2777.0 12.0 (.47) 15.8 (.62) 8.2 (.32) 2.6 (.10) 3.6 (.14) 6.5 (.26) 500/100 2x16 (2x1.5) Black H2x1.50/12 2797.0 16.0 (.63) 19.6 (.77) 12.0 (.47) 2.6 (.10) 3.6 (.14) 6.5 (.26) 500/100 2x14 (2x2.5) Blue 2778.0 14.0 (.55) 18.5 (.73) 10.0 (.39) 3.3 (.13) 4.5 (.18) 8.0 (.31) 500/100 H2x2.50/10 2x14 (2x2.5) Blue H2x2.50/12 2798.0 17.0 (.67) 20.5 (.80) 12.0 (.47) 3.3 (.13) 4.5 (.18) 8.0 (.31) 500/100 2x12 (2x4.0) Gray H2x4.00/12 2799.0 16.0 (.63) 22.0 (.87) 12.0 (.47) 3.9 (.15) 5.2 (.20) 9.0 (.35) 100 2x10 (2x6.0) Yellow H2x6.00/12 2800.0 18.0 (.71) 23.0 (.91) 12.0 (.47) 5.0 (.20) 6.2 (.24) 11.4 (.45) 100 2x8 (2x10.0) Red H2x10.00/12 2801.0 18.0 (.71) 24.0 (.94) 12.0 (.47) 6.2 (.24) 7.6 (.30) 13.4 (.53) 100 2X6 (2x16.0) Blue H2x16.00/16 2802.0 20.0 (.79) 29.0 (1.14) 16.0 (.63) 8.9 (.35) 9.5 (.37) 17.2 (.68) 100/50 * Different standard packs are available for many ferrules. To order the desired standard pack, please use the quantity required as a suffix to the Cat. No. INSULATED FERRULES Assortment Box Handy Assortment Boxes for convenient dispensing and storage of Industry and DIN Standard Insulated Ferrules. Types AB1-S and AB1-D are equipped with five different ferrule sizes. Types AB2-S and AB2-D are equipped with four different ferrule sizes. Contents of each box is listed. Dimensions for industry and DIN standard insulated ferrules are listed on pages 106. - Wire Connectors - Splicing Wire and Cable Connectors - Wire Connectors and Soldering Lugs for Use with Copper Conductors - Splicing Wire Connectors Example: Type H2x0.50/0, Cat. No. 2794.0/100 for a standard pack of 100 Ferrule Qty. AWG (mm2) Ferrule Type Ferrule Cat. No. Ferrule Color AB1-S Industry Standard 50 20 (.50) H0.50/8 100 20 (.75) H0.75/8 100 18 (1.00) H1.00/6 100 16 (1.50) H1.50/8 50 14 (2.50) H2.50/8 2201.0 2202.0 2399.0 2204.0 2206.0 Orange Whiite Yellow Red Blue AB2-S Industry Standard 50 12 (.4.0) H4.00/10 20 10 (6.0) H6.00/12 20 8 (10.0) H10.00/12 10 6 (16.0) H16.00/12 2208.0 2210.0 2212.0 2214.0 Gray Black Ivory Green AB1-D DIN Standard 50 20 (.50) 100 20 (.75) 100 18 (1.0) 100 16 (1.5) 50 14 (2.5) H0.50/6 H0.75/8 H1.00/8 H1.50/8 H2.50/8 2864.0 2867.0 2871.0 2841.0 2845.0 White Gray Red Black Blue AB2-D DIN Standard 50 12 (4.00) 20 10 (6.00) 20 8 (10.00) 10 6 (16.00) H4.00/10 H6.00/12 H10.00/12 H16.00/12 2848.0 2851.0 2853.0 2855.0 Gray Yellow Red Blue Type Cat. No. Std. Pk. AB1-S 2884.9 1 AB2-S 2885.9 1 AB1-D 2884.0 1 AB2-D 2885.0 1 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com