2AS2-2

3 POSITION SELECTOR SWITCH CONTACT BLOCK OPERATION GUIDE revision for dwg # rev - 1PB-2AS2-x ch.no. 2 CONTACT BLOCK GUIDE × × × × × × × × × 1 NO (left) 2 NC in series (side × side) 1 NO (right) 1 NC (right) 1 NC (left) 2 NO in parallel (side × side) description original design date 11/01/07 revised by Philipp E. 1 3 (Left or right as seen from front of operator) Up tp six switch contacts can be installed. 5 4 27 mm [1.1 in] I TEM DESCRIPTION CAT. NO. DESCRIPTION Maintained Spring Return Maintained Spring Return Spring Return Spring Return - max. 6 mm [.25 in] 43 mm [1.7 in] 67 mm [2.6 in] 91 mm [3.6 in] * = Selector Switch is supplied with mounting bracket (ITEM 1,2 and 3) ** = Switch Contacts must be ordered separatly unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. 2AS2-1 2AS2-2 2AS2-3 1* Selector Switch 2AS2-4 2AS2-5 2AS2-6 2* Mounting Bracket 2BRK 3 Mounting Bracket Screws incl. in 2BRK 4 Panel S1 S2 5** Switch Contacts S3 S4 titel MIN. MAX. QTY. QTY. Black 1 1 Black 1 1 Black 1 1 Black 1 1 Black 1 1 Black 1 1 1 1 2 2 Green 1 6 Red 1 6 Green/Black 1 6 Red/Black 1 6 Color This Drawing is the property of R 22mm Non-Illuminated Selector Switch 2AS2-x (x=type) 11/01/07 11/01/07 11/01/07 = = = = ±1mm ±0.5mm ±0.2mm −mm M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal drawing no.: 1PB-2AS2-x 28.5 mm [1.1 in] rev.: - scale: sheet: 1 of: 1