34902070

Universal Marking System Possibilities Component Marking Terminal Block Marking Cable Marking Wire Marking Signs Name Plates Legend Plates Logo Plates 2 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Marking Systems Plotter VP 600 Basic The VP 600 Basic base unit is an economy auxiliary plotter that has to be connected to a PC via a USB connection. It is a high speed plotting device and enables plotting of different markers in one setting. The marker fixture and the plotter pen have to be inserted manually before commencing the plotting operation. The base unit is controlled through a PC with the help of Vario Sign software (sold separately). Manual available in English and Spanish. The special design of the VP 600 Basic enables it to hold different markers from various manufacturers at the same time. It is also possible to write on relatively large markers with a maximum height of 10.5 mm. • Professionally marking of connectors, wires, cables, equipment, cable ties, shrink tubing, labels and signs of different sizes and materials, as well as customer-specific items. • Auto calibration • Universal Power Supply 100-240V AC • Control language HPGL • Universal marking software (VarioSign) sold separately • Marking area 273 x 305 mm • Size: 18.5 x 18.9 x 6.1 in. (470 x 480 x 155 mm) • Weight: 13.9 lbs. Ordering Information VP 600 BASIC BASE UNIT (power supply and USB cable included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34000082 VARIOSIGN SIGN SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34000022 FIXTURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 5-6 PEN AND INK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4 Plotter VP 600 A3 The VP 600 A3 base unit is an advanced auxiliary plotter that has to be connected to a PC via a USB connection. It is a high speed plotting device and enables plotting of different markers in one setting. The base unit is primarily controlled through a PC with the help of Vario Sign software (sold separately). Manual available in English and Spanish. The special design of the VP 600 A3 enables it to hold different markers from various manufacturers at the same time. It is also possible to write on relatively large markers with a maximum height of 10.5 mm. • Basic features of plotter VP 600 Basic plus: • Integrated and automated pen station. Holds 4 different pens at the same time, for fast and frequently changing applications. • Built-in pen priming function • Automatic recognition system for marking fixture / plates ensures faster and easier handing of frequently changing marking applications. • Wide marking area 422 x 305 mm • Size: 27.2 x 18.9 x 6.1 in. (690 x 480 x 155 mm) • Weight: 18.3 lbs. Ordering Information VP 600 A3 BASE UNIT (power supply and USB cable included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34000080 VARIOSIGN SIGN SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34000022 FIXTURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pages 5-6 PEN AND INK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 3 Marking Systems Accessories Plotter Pens These “tubular-nib” pens are suitable for VP 600 Basic and VP 600 A3 and all current labeling and identification systems with HP penholders. They are available in two tip widths identified by body color 0.25 mm, 0.35 mm; ink cartridge not supplied with pen. A recovery / storage stand is included. Special variants for other systems are available on request. Ink These are easy to insert “tubular-nib” pen cartridges containing special formulated black etching ink suitable for marking, identifying and labeling various plastics. It is fast drying, smudge-proof, fade resistant, and resistant to chemicals when used on suitable plastic materials. The ink formula prevents the plotter pens from clogging as easliy when properly stored. A clogged plotter pen may recover itself after a while by following the plotter pen handling and care instructions. Disposable Pens The disposable pens (etching) use the same special ink as used in the ink cartridges. They deliver the same outstanding durability and print quality as the standard plotter pens with the convenience of a disposable pen. These pre-filled pens allow for fast, efficient and cost effective printing without refilling ink or cleaning. They are available in two tip widths identified by body color - 0.25 and 0.35mm. Cleaning Set It is an easy-to-use cleaning unit and a set of pen cleaners developed specially for EK Pens. The cleaning unit enables the pens to be rinsed thoroughly while preventing skin contact with cleaning fluid or ink. The cleaning unit can be used for up to ten cleaning cycles. The necessary precautions must be taken when disposing of cleaning fluid, the cleaning unit can be reused. The set includes 2 pen cleaner bottles, 2x10 ml which can be purchased separately as well for continued use of the cleaning unit. Product EK Plotter Pen (white) EK Plotter Pen (yellow) Width 0.25 mm 0.35 mm EK Ink Cartridge 5 cartridges, Black, 1 ml. each EK Disposable Plotter Pen (white) EK Disposable Plotter Pen (yellow) Cleaning Unit Order No. 35001025 35001035 35100006 0.25 mm 0.35 mm 35003025 35003035 Pen Cleaners EK Cleaning Set (includes cleaning unit and pen cleaner) EK Pen Cleaner (2 pieces, 2x10 ml) EK pen Cleaner Bottle (1 piece, 1x30 ml) 35100010 Adapter for an Utra Fine Sharpie™ 35000501 Suction Ball 35100013 Service Kit 34000026 35100008 35100012 Pen Cleaner This cleaning solution comes in easy to handle cartridges and is used in conjunction with the cleaning unit. A standard pack consists of two pen cleaner cartridges. Cleaning can be performed on standard refillable pens only. A 30 ml bottle is also available for refilling the cartridges. Adapter This adapter allows the use of Sharpie™ Ultra Fine felt tip pens instead of standard plotter pens. Suction Ball The "suction ball" is a helpful tool to bring a slightly clogged disposable or refillable plotter pen back to life. The suction can prime a slightly clogged plotter pen from the vacuum created within the "ball". 5 replacement tips are included with each suction ball. Service Kit for VP 600 A3 The service kit includes 4 plotter pen station inserts, 1 wrench, 12 single primer plates. 4 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Marking Systems VP 600 Fixtures Description ABB / Entrelec ABB Entrelec universal - RC/RCT quarter size ABB Entrelec RC 510A, 610A, 810A ABB Entrelec RC 510B, 610B, 810B ABB Entrelec RB-RBP 5-12 ABB Entrelec BA 5-50 ABB Entrelec PIB ABB Entrelec RCCV ABB Entrelec BS / ILS / ILS-H ABB Entrelec PAM -PAM 21515/21520, PAM 43015/43020 ABB Entrelec R310 ABB Entrelec RTM ABB Entrelec MC 512/612/812PA Set of sticky pads ( 8 pcs) for RC/RCT Part No. 34902063 34902114 34902102 34902086 34902100 34902101 34902038 34902106 34902135 34902174 34902088 34902190 34910000 Allen Bradley Allen Bradley Universal (old marker cards) Allen Bradley 1492 Universal 34902046 34902141 Altech Altech MT2G Altech MT 2n - MT 4n, MT 7.5, MT 20, MT 25 Altech MT 5 - MT 15 Altech MT 9F Altech CA 509-G3 Altech Group marker G1, G2, G4 34902191 34902081 34902001 34902057 34902079 34902080 ASI ASI  Universal 34902172 C3controls c3controls WTB2-M 2 c3controls WTB2-M 5 - M 15 c3controls WTB2-M 9 34902081 34902001 34902057 Conexel Dekafix 5 34902146 Connectwell Connectwell K2G Connectwell K2n - K4n, K7.5, K 20, K25 Connectwell K5 - K15 Connectwell K9F Connectwell CA 509-G1/G2/G4 Connectwell CA 509-G3 34902191 34902081 34902001 34902057 34902080 34902079 Conta Clip Conta Clip BSTR / SB Conta Clip SB 8/10 Conta Clip AD 1/5 N SB 7.5 Conta Clip ADQ Conta Clip KBH-S4 Conta Clip AD 1/6N, AD 1/5, AD 1/6, AD 1/8 Conta Clip AD 1/12 N Conta Clip MC BSTR / MC SB Conta Clip ZSchT 6 / SchT 9 / SchT 10 Conta Clip KBH 3 stripe Conta Clip KBH 5 stripe Conta Clip KBH 10 Conta Clip KBH-S stripe Conta Clip KBH-S single Conta Clip BST 8, ESO, GKE, Label 34902002 34902003 34902089 34902090 34902091 34902092 34902093 34902108 34902109 34902011 34902014 34902016 34902024 34902023 34902106 DECA DECA W4-W8 Set of sticky pads for DECA W4-W8 (8 pcs.) 34902197 34910020 Degson Degson ZB Degson TSZB4 Degson TZB4 Degson DEK4, 5, 6 Degson ZW5 34902159 34902160 34902161 34902162 34902163 Dinkle Universal 34902145 Description Elektro Elektro RSA 12 Part No. 34902173 elmex elmex card 10 by 10 elmex KN 5,5; 6,5; 8 elmex U5-10 elmex KN10, KN12 34902061 34902077 34902157 34902158 General Marking General Marking TDM General Marking MG-TPM 34902166 34902170 Grafoplast Grafoplast 5I2KTB 34902211 Idento Idento EEB / LEB 34902106 Klemsan Plot-PLA Plot-PL E (Universal engraving and plot support plate half size, A4) Plot PL (Universal engraving and plot support plate full size A3) Plot-PL DB Plot-PL DB4 Plot-PL DB4.5x7.5 Plot-PL DB5 Plot-PL DB10/8, 10/10 Plot-PL KBE Plot-PL KE 34902124 34902106 34902107 34902136 34902175 34902194 34902138 34902165 34902196 34902137 Legrand Wire Marker Memocab Terminal Blocks Legrand Terminal Blocks other manufacturer Cable markers Duplix Self adhesive markers for equipment 34902119 34902120 34902121 34902122 34902123 Lumberg Lumberg ZBS 34902180 Moeller Moeller Typ XA Moeller Typ XB, M22-XST 34902006 34902007 Morsettitalia Morsettitalia 42090 Morsettitalia 42091 Morsettitalia 43192, 43196, 43541 Morsettitalia 43899T43 Morsettitalia Strips 6, 8, 10, 12 mm Morsettitalia 438MFC 34902113 34902179 34902112 34902176 34902202 34902212 murrplastik murrplastik MP-400 (KS 4/xx) murrplastik MP-401 (KES, KLG, KMR, KPX, KS, KSA,KSF etc.) murrplastik BS, KSF 10x8, KSN murrplastik KDE murrplastik KNDW murrplastik KPX ZS murrplastik KS 5/10 murrplastik KSE 0.75/10 ; KSE 1.5/10 murrplastik KSE 1,5/18 murrplastik KET murrplastik DM 34902008 34902009 34902082 34902111 34902110 34902099 34902083 34902084 34902085 34902114 34902106 Continued on next page. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 5 Marking Systems VP 600 Fixtures Description PARTEX Partex PA+02 / PAZ+02 strip Partex PA+1 / PAZ+1 strip Partex PA+2 single Partex PC10 / PC20 Partex PC30 / PC40 Partex PC50 Partex PEM Partex PK-2 single Partex PK2 / PVC strip Partex PK2 Zerex strip Partex PS Partex TX Partex TX 61 Partex PFC Partex PN endless strip Partex PN (21) endless strip Partex POH Partex PFA20018TK9 Set of Sticky Pads for Partex PFC (4 pcs.) Set of Sticky Pads for Partex POH (8 pcs.) 34902011 34902014 34902016 34902019 34902020 34902018 34902022 34902023 34902024 34902025 34902028 34902029 34902118 34902070 34902026 34902139 34902027 34902106 34910008 34910007 Phoenix Phoenix Contact ZBM Phoenix Contact ZB Phoenix Contact ZBFM Phoenix Contact ZBF, ZBN Phoenix Contact BNZ Phoenix Contact BN-ZB Phoenix Contact SS-ZB Phoenix Contact LBHZ Phoenix Contact PAB Phoenix Contact GPE (quarter size plate) Phoenix Contact GPE (half size plate, A4) Phoenix UC-TM/WMC 3.1 Phoenix UC-WMC-4.4 Phoenix UC-WMC7.5 Phoenix UC-TMF/UC-WMT Phoenix UC-SIE/UC1-TM Phoenix UC-EMLP Phoenix UC-WM Phoenix UCT-TM Phoenix UCT-TMF/UCT-WMT Set of Sticky Pads for Phoenix ZBFM (8 pcs.) 34902039 34902047 34902049 34900050 34902051 34902052 34902053 34902054 34902055 34902071 34902106 34902129 34902130 34902131 34902132 34902133 34902134 34902164 34902195 34902193 34910021 RAAD RAAD Universal 5-10 34902192 RELPOL RELPOL TR/ERSCE RELPOL GS4-0035 RELPOL GZP-0035 RELPOL GZT-0035/GZT80-0035 RELPOL PIR 34902209 34902208 34902207 34902206 34902210 Scheider Electric Schneider Electric KN-300 Schneider Electric BMP/01 Schneider Electric BMP/02 Schneider Electric BMP/03 34902168 34902198 34902199 34902106 SES 6 Part No. SES PLIO M-012 SES PLIO 14-1177 SES 27 x 18 Set of Sticky Pads for SES PLIO 14-1177 (8 pcs.) Description Part No. Siemens Siemens S7 insert plates Universal Siemens Tag 22x22 / 17x28 Siemens Sirius 10x7, 20x7 34902140 34902067 34902073 Sprecher + Schuh Sprecher + Schuh Universal Sprecher + Schuh V7-MP Sprecher + Schuh V7-MP5 34902046 34902188 34902193 UPUN UPUN BB UPUN JB5 UPUN JBM5 UPUN KB UPUN UBFM UPUN ZB UPUN ZBM4 Set of Sticky Pads for UPUN KB (3 pcs.) 34902185 34902183 34902184 34902185 34902186 34902181 34902182 34910017 Wago WAGO WMB 4/4,2/5 WAGO WSB 4 WAGO WSB 5/5,2 WAGO WSB mini WAGO WSB micro WAGO Group marker carrier WAGO Marking Strip WAGO Marker tags WAGO WTB WAGO WCB WAGO WMB inline WAGO 210-345 Set of sticky pads (12 pcs) for Top Job (Marking Strip) 34902041 34902074 34902075 34902076 34902201 34902078 34902087 34902094 34902096 34902097 34902098 34902106 34910002 Weidmüller / Rockwell (Allen Bradley) Weidmüller MultiCard Universal Weidmüller MultiCard SF4-6 / SFC3 Weidmüller MultiCard WAD Weidmüller Dekafix (non-Multicard) Set of sticky pads (6 pcs) for Multicard Universal 34902045 34902044 34902169 34902167 34910001 Wieland Wieland Universal Wieland BZ/WKF 1,5 04.243.2053.0 Wieland BZ/WKF 1,5/10 Z4.243.2053.0 Wieland Steierform 6 x 15, 10 x 20 Set of sticky pads (9 pcs) for Wieland Universal 34902043 34902047 34902049 34902106 34910006 Woertz Woertz Universal 34902046 Zoloda CW 5/6 IB Universal ICAB 00-02 ICAB 03 34902142 34902177 34902143 34902144 34902037 34902038 34902106 34910016 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Plotter Pen Handling and Care Handling and care of the EK-Team plotter pens for the universal EK-Team marking system. For the state of the art universal marking system by EK-team, the manufacture is supplying a fast drying and etching ink that is required for marking plastic material within the control and automation industry. Due to these special properties of the ink, these plotter pens require much more care than a regular marking pen. Therefore EK-Team designed some helpful tools to keep your EK-team plotter pen in tip top shape. Recovery and Storage Stand Refillable Pens Disposable Pen Refrigerate pens when not in use for long periods of time. Pen Stand This stand is designed to keep the plotter pen in an upright position, when not used with the marking system. The upright position allows the plotter pen to recover and to be properly stored. It is recommended to store plotter pens that will be idle for a few hours in a dry and cool location, preferably in the refrigerator. The recovery and storage stand accommodates easy storage and handling. Call Altech for your free recovery and storage stand. Part. No. 35000100 Suction Ball The "suction ball" is a helpful tool to bring a slightly clogged disposable or refillable plotter pen back to life. The suction can unclog a slightly clogged plotter pen from the vacuum created within the "ball". This additional tool can be very helpful in addition to the already available cleaning kit (Cat. No. 35100010) for the refillable plotter pens. 5 replacement tips are included with each suction ball. Part. No. 35100013 Pen Cleaning CLEANING UNIT It is an easy-to-use cleaning unit developed specially for refillable pens. The cleaning unit enables the pens to be rinsed thoroughly while preventing skin contact with cleaning fluid or ink. The cleaning unit can be used for up to ten cleaning cycles. The necessary precautions must be taken when disposing of cleaning fluid, the cleaning unit can be reused. PEN UNIT This cleaning solution comes in easy to handle cartridges and is used in conjunction with the cleaning unit. A standard pack consists of two pen cleaner cartridges. Cleaning can be performed on standard refillable pens only. Cleaning Set Part. No. 35100010 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 7 Marking Systems Engraver VP/E 600 Add-on Unit The engraving unit was specifically designed to be used with the VP 600 plotters. Changing back and forth between the pen-plotter and the engraver is easy. The engraver is meant to engrave plastic signs on double sided material, pre-cut or blank sheets, legend plates, push button inlays, etc. Any kind of design software can be used, e.g. Corel Draw, to create custom logos, symbols as signs, that saves the creation as a HPL plot file (HPGL). The add-on unit consists of an engraving head, spindle, controller, vaccum for a clean engraving process; as well as all cable and necessary connection parts. The engraver unit is controlled by the VarioSign software for ease of use and design flexibility. Vacuum Cleaner Bag Replacement bags for the VP/E 600 engraver’s vacuum cleaner Engraver Fixtures The universal support plates are used to hold the engraving materials precisely in place. Five sizes are offered for holding plastic sheets, aluminum and brass plates, etc.. The surface material is self sticking to hold different materials in place during the engraving process. EngrAVEr VP/E 600 Add-On UnIt Ordering Information VP/E 600 ENGRAVER UNIT (VP 600 REQUIRED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34000083 Engraving Unit Accessories VACUUM ClEAnEr bAg Ordering Information VACUUM CLEANER BAG, SET OF 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35020000 EngrAVEr FIxtUrES Ordering Information FULL SIZE, A3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34902107 HALF SIZE, A4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34902106 1/4 FIXTURE, 30 X 100mm, 9 FOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34902115 1/4 FIXTURE, 60 X 100mm, 4 FOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34902116 1/4 FIXTURE, 90 X 100mm, 3 FOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34902117 8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Marking Systems Engraving Needles These engraving needles are to be used with the VP/E 600 engraver. They are available in different angles and tip widths depending on shape and material that is being engraved. Needles for metal engraving are available, the double tooth cutter with fishtail can dip into metal quite easily to speed the grinding performance. * Recommended needles for stainless steel Please note that for stainless steel, only a surface engraving is possible, not deep like in plastic material. EngrAVIng nEEdlE Ordering Information Engraving Needles for: Plastic Material Engraving needle 15° - 0.2 mm Engraving needle 15° - 0.3 mm Engraving needle 15° - 0.4 mm Engraving needle 15° - 0.5 mm Engraving needle 15° - 0.7 mm Engraving needle 15° - 1.0 mm Engraving needle 15° - set of 0.2; 0.3; 0.4; 0.5; 0.7; 1.0 mm Engraving needle 36° - 0.2 mm Engraving needle 36° - 0.3 mm Engraving needle 36° - 0.4 mm Engraving needle 36° - 0.5 mm Engraving needle 36° - 0.7 mm Engraving needle 36° - 1.0 mm Engraving needle 60° - 0.2 mm Engraving needle 60° - 0.3 mm Engraving needle 60° - 0.4 mm Engraving needle 60° - 0.5 mm Engraving needle 60° - 0.7 mm Engraving needle 60° - 1.0 mm Engraving needle 90° - 0.2 mm Engraving needle 90° - 0.3 mm Engraving needle 90° - 0.4 mm Engraving needle 90° - 0.5 mm Engraving needle 90° - 0.7 mm Engraving needle 90° - 1.0 mm Metal Engraving needle 35° - 0.2 mm* Engraving needle 35° - 0.4 mm* Double tooth cutter fishtail 0.5 mm Double tooth cutter fishtail 0.6 mm Double tooth cutter fishtail 0.8 mm Double tooth cutter fishtail 1.00 mm Double tooth cutter fishtail 1.20 mm Double tooth cutter fishtail 1.40 mm Double tooth cutter fishtail 1.60 mm Double tooth cutter fishtail 2.00 mm Double tooth cutter fishtail 2.40 mm Double tooth cutter fishtail 3.00 mm Engraving Needle 90° for anodized aluminum 1.00 mm 35010003 35010002 35010001 35010000 35010004 35010005 35010006 35010015 35010016 35010017 35010018 35010019 35010020 35010021 35010022 35010023 35010024 35010025 35010026 35010027 35010028 35010029 35010010 35010011 35010012 35010013 35010014 35010030 35010031 35010032 35010033 35010034 35010035 35010036 35010037 35010038 35010039 35010043 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 9 STANDARD TERMS AND CONDITIONS OF SALE TITLE - Title to the products of ALTECH shall remain with ALTECH until payment is made in full by Customer. Such reservation of title is for the purpose of securing the purchase price and shall not relieve Customer of the duty to inspect the products upon receipt, to notify ALTECH of any deficiencies or defects, and to exercise due care in the use, installation, operation, and maintenance of the products when on the premise of the Customer or under the control of the Customer. Notwithstanding any reservation of title by ALTECH, risk of loss shall pass to customer at any time of shipment. SHIPMENT AND DELIVERY - All orders for destination in the mainland United States (less Hawaii, Alaska and non-continental United States possessions) will be shipped F.O.B. Flemington, N.J. All destination, shipping and other charges shall be paid by the Customer in accordance with ALTECH’s then current shipping and billing practices. Delivery dates given in the acceptance of any order are approximate. ALTECH shall not be liable for delays in delivery or in performance due to causes beyond its reasonable control including acts of God, acts of Customer, acts of civil or military authority, fires, strikes or other labor disturbances, war, riot or delays in transportation. In the event of such delay, the date of delivery or performance shall be extended for a period equal to the time lost by reason of the delay. PRICE - PRICES in any ALTECH publication are subject to change without prior notification. Catalog prices are based on prices published in the current price list. All written quotations are valid for thirty (30) days from the date of quotation. Customer shall pay all sales, use, excise or similar taxes whenever ALTECH must itself pay and/or collect such tax from Customer arising out of the sale. PAYMENT - Customer agrees to make payment within thirty (30) days of date of the invoice from ALTECH. Customer agrees to pay a late payment charge of one and one-half percent (1.5% per month, or the maximum late payment charge permitted by applicable law, whichever is less, on any unpaid amount for each calendar month (or fraction thereof) that such payment is in default. Orders amounting to less than $100.00 will be billed at $100.00 plus freight. Full carton purchases are required. In the event of referral to an attorney for collection, reasonable attorney’s fees for collection of the overdue amount shall be paid by Customer. In the event payment is not received within 30 days from the date of invoice, any discount shall be cancelled and the full list price will be due. LIMITED WARRANTY - ALTECH warrants to Customer that the equipment purchases shall be free from defects in material and workmanship under normal use and service for a period of one year from shipment. Written notice as an explanation of the circumstances of any claim that the equipment has proved defective in material or workmanship shall be given promptly by the Customer to ALTECH. ALTECH will not be liable for any misuse, improper operations, improper installation, improper maintenance, alteration, modification, accident or unusual degradation of the equipment or parts due to an unsuitable installation environment. No representation of other affirmation of facts, including but not limited to statements regarding capacity, suitability for use or performance of the equipment, shall be or be deemed to be a warranty or representation by ALTECH for any purpose, nor give rise to any liability or obligation of ALTECH whatsoever. Customer’s sole and exclusive remedy in the event of breach of warranty, as set forth herein, is expressly limited to (1) the correction of the defect by adjustment, repair, modification, or replacement, or (2) issuance of a credit or refund of the purchase price for the defective equipment at ALTECH’s election and sole expense. EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY EXTENDS ONLY TO THE CUSTOMER FROM ALTECH OR ITS AUTHORIZED DISTRIBUTOR. LIMITATION OF LIABILITY - IN NO EVENT, SHALL ALTECH BE LIABLE FOR LOSS OF PROFITS, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF ANY BREACH OF THIS AGREEMENT OR OBLIGATIONS UNDER THE AGREEMENT. ALTECH SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED BY DELAY IN SHIPMENT, INSTALLATION OR FURNISHING OF EQUIPMENT OR SERVICES UNDER THIS AGREEMENT. No action arising out of any claimed breach of this Agreement may be brought by either party more than two (2) years after the cause of action has accrued. PATENT INDEMNITY - ALTECH shall defend or settle any suit or proceeding brought against Customer based on a claim that any equipment 10 made to ALTECH design and furnished hereunder constitutes an infringement of any existing United States patent, provided (ALTECH) is notified promptly in writing and is given complete authorization and information required for the defense, and ALTECH shall pay all damages and costs awarded against Customer, but shall not be responsible for any costs, expense or compromise incurred or made by Customer without ALTECH’s prior written consent. If any equipment is in ALTECH’s opinion likely to or does become the subject of a claim for patent infringement, ALTECH may at its option and expense procure for Customer the right to continue using the device, modify it to become non-infringing, but in the event ALTECH is not reasonably able to modify, substitute, or otherwise procure for Customer the right to continue using it, ALTECH will remove such equipment and refund to Customer the amount paid in excess of a reasonable rental for past use. ALTECH shall not be liable for any infringement or claim based upon use of the equipment in combination with other equipment not supplied by ALTECH or with modifications made by Customer. The foregoing states the entire liability of ALTECH to Customer arising from patent infringement. SELLER’S REMEDIES - Should Customer fail to make any payment within ten (10) days of its due date, or fail to perform any other of the Customer’s obligation hereunder upon thirty (30) days written notice, or should Customer be or become insolvent or be a party to any bankruptcy receivership proceeding prior to full payment of all amounts payable hereunder, ALTECH may: (a) with or without demand or notice to customer declare the entire amount unpaid immediately due and payable; (b) enter upon the premises where the equipment may be found and remove it (Customer shall assemble the equipment and make it available to ALTECH at a place reasonably convenient to both parties and shall permit and assist ALTECH in effecting the retaking and removal of the equipment); and (c) sell any or all the equipment as permitted under applicable law, applying the proceeds of the sale to payment of the expenses of retaking, repairing and selling the equipment, reasonable attorney fees and to the satisfaction of all indebtedness then due and unpaid under this Agreement. Any surplus shall be paid to Customer and any deficiency shall be paid to ALTECH by Customer. The remedies provided herein shall be cumulative and in addition to all other remedies provided by law or equity or under the Uniform Commercial Code. GOVERNING LAW - This agreement will be governed by the Laws of the State of New Jersey. GENERAL - This Agreement shall only become effective and binding when either (a) it has been accepted and executed by an authorized representative of ALTECH, or (b) the equipment has been shipped to Customer, with or without acceptance in writing hereon. Notice of acceptance is hereby waived by Customer. Customer hereby acknowledges receipt of a true and complete copy hereof. No addition to or modification of any of the Terms and Conditions of Sale as they appear herein shall be binding upon ALTECH unless signed in writing by duly authorized representative of ALTECH in Flemington, N.J. Typographical and clerical errors in quotations, orders and acknowledgments are subject to correction. This Agreement is not assignable without the prior written consent of ALTECH. Any attempt to assign any of the rights, duties or obligations of this Agreement without such consent is void. If any provision or provisions of this Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability, of the remaining provisions shall not in any way be affected or impaired thereby. ALTECH is not responsible for failure to fulfill its obligation under this Agreement due to causes beyond its control, or except as agreed herein. THE CUSTOMER ACKNOWLEDGES THAT HE HAS READ THE AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. FURTHERMORE, THE CUSTOMER AGREES THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN THE PARTIES, WHICH SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, AND ALL OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Service Center Phone/Fax: 908-806-7035 • • • Warranty Service Repair • • • • • • VP100 VP500 VE500 VP600 VP/E600 OEM branded similar models Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 11 Altech Corporation 35 Royal Road Flemington, NJ 08822-6000 Phone (908) 806-9400 Fax (908) 806-9490 www.altechcorp.com Altech Corp.® 280-062016-3M PRINTED AUGUST 2016