40.304

Altech’s Eurostrips are safe, economical and meet national and international standards. They are a cost-effective alternative to barrier strips that require labor-intensive wire lugs and they reduce the number of electrical connections in circuits. It’s easy. Eurostrips feature tubular screw clamps, wire protectors, and are ready for immediate wire hookup. Eurostrips are ideal for limited space, which means more room for other components or reduced enclosure size. Free float or mount them onto any panel. They are available in easy-to-cut 12-pole strips or pre-cut. Double-Row Feed-Through Eurostrips are supplied with wire protectors. Offered with flat bases or standoff feet, they are molded of selfextinguishing polyamide. Custom imprinting and marking plates are available. EUROSTRIPS 42 ® Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com E A S Y M O U N T I N G S AV E S RELIABLE CONNECTION INSTALLATION TIME E V E RY T I M E Eurostrips are quickly panel or chassis mounted. Use standard screws or mounting pins, offered as accessories in this section, or leave them free floating to completely eliminate mounting. EASY CONNECTION S AV E S M O N E Y What could be easier? Simply strip the insulation, insert the wire and tighten the screw to achieve a gas-tight, electrically efficient connection—every time. Wire lugs are eliminated, saving material cost and installation time. E A S Y M O D I F I C AT I O N R E D U C E S I N V E N T O RY Order standard (12) pole Eurostrips or precut lengths to meet your specific pole requirements. Polyamide housing can be cut with a utility knife or hacksaw, providing flexibility to meet changing needs. Because standard 12 pole strips can be so easily cut to the required number of poles, stocking is simplified and inventory is minimized. Wire Protector Center Barrier The basis for the Eurostrip’s reliable connection is a precision machined tubular screw clamp insert made from highly conductive copper alloy which is nickel plated for maximum corrosion resistance. The clamping screw material is high strength steel to prevent screw head breakage and thread damage resulting from over torquing and to provide trouble free operation. Screws are plated with zinc yellow chromate to provide corrosion resistance. Optional stainless steel or nickel plated brass screws may be ordered for highly corrosive environments or marine applications. Standard Eurostrips feature stainless steel wire protectors. Unlike wire protectors found in many competitive products which use copper alloy materials, stainless steel has superior memory characteristics. Accordingly, the wire protector will return to its original position even after repeated use. This means trouble-free wire insertion and quicker reconnections. ACCESSORIES External jumpers bus potentials between poles on Eurostrips, eliminating wire jumpers and reducing wiring time. Isolation partition increases clearance between adjacent poles and provides visual separation for more efficient wiring. Mounting pins simplify installation and mounting of Eurostrips. Simply drill the mounting hole, position and install the pin from underneath the panel. When correct position is reached, pin will retain terminal to panel. Identify circuits and reduce wiring mistakes with marking plates. Order plates imprinted or blank. Position under or on top of a Eurostrip housing. Imprinting Eurostrips reduces wiring errors and helps to identify circuits. Use Imprinting to mark individual poles when high quantities are involved or custom imprints are required. Altech’s stainless steel wire protector features a unique center barrier preventing wires from being inserted too far. Another Altech advantage. HOUSINGS Eurostrip housings are injection molded from self-extinguishing polyamide 6.6 molding material, possessing high dielectric strength and excellent electrical insulation and temperature resistance. Each housing has been specially designed to provide creepage and clearance distances to achieve ratings up to 600V. Choose low profile, flat base housings for minimum clearance applications (300V) or housings with mounting feet for maximum voltage isolation (600V). Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 43 TS1.5 TS2.5 Flat base with wire protector Flat base with wire protector FEED-THROUGH FLAT BASE EUROSTRIPS 35 or 32mm DIN Rail Eurostrips described on this and the following page are available with a flat base for minimum clearance applications. They can be panel mounted or left to free float. Offered in easy to cut standard 12 pole strips, they can also be ordered precut with the required number of poles. • • • • • Tubular screw clamp Panel mount or free float Housing material: polyamide 6.6 Color: opaque white Marking plates or factory imprinted application Pole Spacing 8 mm 10 mm Mounting Hole Diameter 2.8 mm 3.5 mm Stripping Length 5 mm 6 mm Approvals Wire Range 1.5 mm2 22-12 AWG 22-16 AWG 2.5 mm2 22-10 AWG 18-12 AWG Voltage Rating 380 V 300 V 300 V 380 V 300 V 300 V Current Rating 18 A 20 A 15 A 26 A 30 A 30 A Torque 0.5 Nm 4.4 lbf/in 0.8 Nm 7.0 lbf/in No. of Poles 2 3 4 5 6 7 8 9 10 11 12 Cat. No. Std. Pk. Length Cat. No. Std. Pk. Length 40.002 40.003 40.004 40.005 40.006 40.007 40.008 40.009 40.010 40.011 40.012 100 100 100 100 50 50 50 50 50 50 50 13.6 mm 21.5 mm 29.5 mm 37.4 mm 45.5 mm 53.5 mm 61.3 mm 69.2 mm 77.2 mm 85.1 mm 93.0 mm 40.202 40.203 40.204 40.205 40.206 40.207 40.208 40.209 40.210 40.211 40.212 100 100 100 100 50 50 50 50 50 50 50 17.0 mm 27.0 mm 37.0 mm 47.0 mm 57.0 mm 67.0 mm 77.0 mm 87.0 mm 97.0 mm 107.0 mm 117.0 mm A D C A B D C E F B E F J G H K K M J M For wire-to-wire connections in HVAC, appliance, equipment, power distribution and other industrial applications with strict budget and space requirements. Easy to use double row terminal strips are a cost-effective alternative to barrier strips or other types of terminal blocks. Simply strip the wire, insert and tighten the screw. Eurostrips feature tubular screw clamps, with wire protectors, and recessed metal parts for finger protection. The wire protectors include an integral wire stop in the center of the terminal. The stainless steel wire protectors exhibit excellent memory and the wire stop insures the most effective connection. G I Dimensions mm (in.) A=8.0 (.315) B=M2.5 x 4.3 C=5.6 (.221) D=2.4 (.095) E=Ø2.8 (.110) F=Ø5.35 (.211) G=8.0 (.315) 44 H N L H=Ø3.0 (.118) I=2.5 (.099) J=7.5 (.296) K=6.7 (.264) M=13.7 (.540) N=18.2 (.716) I N L Dimensions mm (in.) A=10.0 (.394) B=M3 x 5.8 C=6.4 (.252) D=3.5 (.138) E=Ø3.5 (.137) F=Ø5.7 (.225) G=10.0 (.394) H=Ø3.6 (.142) I=3.0 (.118) J=9.5 (.374) K=8.0 (.315) M=15.5 (.611) N=21.8 (.858) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TS6 Flat base with wire protector 12 mm 4.2 mm 7 mm 6 mm2 20-8 AWG 18-10 AWG 380 V 300 V 300 V 44 A 40 A 40 A 0.8 Nm 7.0 lbf/in Cat. No. Std. Pk. Length 40.402 40.403 40.404 40.405 40.406 40.407 40.408 40.409 40.410 40.411 40.412 100 100 100 100 50 50 50 50 25 25 25 20.0 mm 32.0 mm 44.0 mm 56.0 mm 68.0 mm 80.0 mm 92.0 mm 104.0 mm 116.0 mm 128.0 mm 140.0 mm A B D C E F K M J G H I N L Dimensions mm (in.) A=12.0 (.472) B=M3.5 x 7 C=7.6 (.299) D=4.3 (.169) E=Ø4.2 (.165) F=Ø6.8 (.268) G=12.0 (.472) H=Ø4.2 (.165) I=4.3 (.169) J=9.5 (.374) K=9.0 (.354) M=17.7 (.697) N=23.0 (.906) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 45 TSF1.5 TSF2.5 Standoff feet with wire protector Standoff feet with wire protector FEED-THROUGH EUROSTRIPS 300V and 600V Standoff Feet Panel Mount For wire-to-wire connections in HVAC, appliance, equipment, power distribution and other industrial applications with restricted budget and space requirements. Eurostrips described on this and the preceeding page are available with standoff feet for increased wiring efficiency. They can be panel mounted or left to free float. Offered in easy to cut 12 pole strips, they can also be ordered precut with the required number of poles. • • • • • Tubular screw clamp Panel mount or free float Housing material: polyamide 6.6 Color: opaque white Marking plates or factory imprinted Pole Spacing 8 mm 10 mm Mounting Hole Diameter 2.8 mm 3.5 mm Stripping Length 5 mm 6 mm Approvals Wire Range 1.5 mm2 22-12 AWG 22-16 AWG 2.5 mm2 22-10 AWG 18-12 AWG Voltage Rating 380 V 600 V 300 V 380 V 600 V 600 V Current Rating 18 A 20 A 15 A 26 A 30 A 30 A Torque 0.5 Nm 4.4 lbf/in 0.8 Nm 7.0 lbf/in No. of Poles 2 3 4 5 6 7 8 9 10 11 12 Cat. No. Std. Pk. Length Cat. No. Std. Pk. Length 40.102 40.103 40.104 40.105 40.106 40.107 40.108 40.109 40.110 40.111 40.112 100 100 100 100 50 50 50 50 50 50 50 13.6 mm 21.5 mm 29.5 mm 37.4 mm 45.4 mm 53.3 mm 61.3 mm 69.2 mm 77.2 mm 85.1 mm 93.0 mm 40.302 40.303 40.304 40.305 40.306 40.307 40.308 40.309 40.310 40.311 40.312 100 100 100 100 50 50 50 50 50 50 50 17.0 mm 27.0 mm 37.0 mm 47.0 mm 57.0 mm 67.0 mm 77.0 mm 87.0 mm 97.0 mm 107.0 mm 117.0 mm A D C A B D C E F B E F J H G K K M J M Easy to use double row terminal strips are a cost-effective alternative to barrier strips or other types of terminal blocks. Simply strip the wire, insert, and tighten the screw. Eurostrips feature tubular screw clamps, with wire protectors, and recessed screws and contacts to prevent shocks and shorts. The wire protectors include an integral wire stop in the center of the terminal. The stainless steel wire protectors exhibit excellent memory and the wire stop insures the most efficient connection. O I L N Dimensions mm (in.) A=8.0 (.315) B=M2.5 x 4.3 C=5.6 (.221) D=2.4 (.095) E=Ø2.8 (.110) F=Ø5.35 (.211) G=8.0 (.315) 46 H=Ø3.0 (.118) I=6.1 (.240) J=7.5 (.296) K=10.1 (.398) M=17.0 (.670) N=18.2 (.716) 0=12.0 (.472) H G O I L N Dimensions mm (in.) A=10.0 (.394) B=M3 x 5.8 C=6.4 (.252) D=3.5 (.138) E=Ø3.5 (.138) F=Ø5.7 (.225) G=10.0 (.394) H=Ø3.6 (.142) I=7.4 (.292) J=9.5 (.374) K=12.0 (.472) M=19.4 (.764) N=22.3 (.879) O=14.0 (.552) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TSF6 TSF16 Standoff feet with wire protector Standoff feet with wire protector 12 mm 15.1 mm 4.2 mm 4.0 mm 7 mm 8 mm 6 mm2 20-8 AWG 18-10 AWG 16 mm2 14-6 AWG 18-6 AWG 380 V 600 V 600 V 450 V 600 V 600 V 44 A 40 A 40 A 82 A 63 A 65 A 0.8 Nm 7.0 lbf/in 21 Nm 18.5 lbf/in Cat. No. Std. Pk. Length Cat. No. Std. Pk. Length 40.502 40.503 40.504 40.505 40.506 40.507 40.508 40.509 40.510 40.511 40.512 100 100 100 100 50 50 50 50 25 25 25 20.0 mm 32.0 mm 44.0 mm 56.0 mm 68.0 mm 80.0 mm 92.0 mm 104.0 mm 116.0 mm 128.0 mm 140.0 mm 40.702 40.703 40.704 40.705 40.706 40.707 40.708 40.709 40.710 40.711 40.712 40 40 40 40 20 20 20 10 10 10 10 25.0 mm 40.0 mm 55.0 mm 70.5 mm 86.0 mm 101.0 mm 116.0 mm 131.0mm 146.0mm 161.0 mm 176.0 mm A D C E F B E F J H G K K M J M D C A B O I L N Dimensions mm (in.) A=12.0 (.472) B=M3.5 x 7 C=7.6 (.299) D=4.3 (.169) E=Ø4.4 (.173) F=Ø6.8 (.268) G=12.0 (.472) H=Ø4.2 (.165) I=8.5 (..335) J=9.6 (.378) K=12.5 (.492) M=20.9 (.823) N=23.0 (.906) O=15.8 (.622) H G I L O N Dimensions mm (in.) A=15.1 (.595) B=M5 x8 C=9.6 (.378) D=5.4 (.213) E=Ø4.2 (.165) F=Ø8.0 (.315) G=15.1 (.595) H=Ø5.7(.224) I=10.4 (.410) J=11.0 (.433) K=16.5 (.650) M=25.8 (1.017) N=26.3 (1.035) O=15.1 (.595) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 47 EXTERNAL JUMPERS EUROSTRIP ACCESSORIES Convenient options that facilitate installation and wire termination. External Jumpers Bus potentials between poles on Eurostrip Terminal Strips reducing wiring time and eliminating wire jumpers. Jumper Pole positions may be removed to provide selective jumpering. When using external jumpers, the terminal's rated cross section is usually reduced one wire size. For jumper maximum current ratings, refer to the corresponding Eurostrip IEC/VDE current rating. • Material: metal-copper alloy, nickel plate • Insulation: polyamide 6.6 • Color: black. External Jumper EQ1.5 EQ2.5 EQ6 EQ16 Eurostrip TS1.5, TSF1.5 TS2.5, TSF2.5 TS6.0, TSF6.0 TSF16 Pole Spacing 8mm (.315) 10 mm (.394 in.) 12 mm (.472) 15 mm (.591 in.) Ordering Information Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. 41.442 41.443 41.444 41.452 20 20 20 5 41.462 41.463 41.464 41.472 20 20 20 5 41.482 41.483 41.484 41.492 20 20 20 5 41.502 41.503 41.504 41.512 20 20 20 5 2 pole 3 pole 4 pole 12 pole ISOLATION PARTITION Isolation Partitions Isolation Partition KA provides separation between adjacent poles of different potentials on 600V Eurostrips with standoff feet. Visual separation between poles is also provided by an isolation partition, assisting circuit identification and increasing wiring efficiency • Material: polyamide 6.6 • Color: black. 48 18.5 mm 27 mm Isolation Partition KA46 Eurostrip TSF2.5, TSF6 Thickness 3.4 mm (.134 in.) Ordering Information Cat. No. Std. Pk. 41.410 5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com MOUNTING PINS EUROSTRIP ACCESSORIES Convenient options that facilitate installation and wire termination. Mounting Pins Speed panel mounting of Eurostrips with AH Mounting Pins. Simply match drill clearance hole in panel, position Eurostrip and install Mounting Pin through hole and into mounting hole in Eurostrip housing. Once pin passes beyond Eurostrip housing, it automatically expands, securing housing to panel. Use two or more mounting pins per Eurostrip. Ø H Mounting Pins AH46 AH16 Eurostrip TSF2.5, TSF6 TSF16 Panel Thickness mm (in.) 0.8 - 1.7 (.031 - .067) 1.0 - 2.1 (.039 - .083) Ordering Information Cat. No. Std. Pk. Cat. No. Std. Pk. 41.420 50 41.421 50 • Material: polyacetal • Color: AH46 black, AH16 gray. IL W Dimensions mm (in.) Mounting Pin Pin Type Height (H) AH46 21.5 (.85) AH16 24.5 (.96) Insertion Length (IL) 14.5 (.57) 19.0 (.75) Panel Hole Dia. 4.5 (.18) 5.5 (.22) Width (W) 13.0 (.51) 13.0 (.51) MARKING PLATES Marking Plates Install Marking Plate MP under or on top of Eurostrip housing to identify individual pole positions to increase wiring efficiency, save installation time and facilitate wire hook-up, system modification and trouble shooting. Select blank marking plate for hand marking or imprinted. • Material: self-extinguishing PVC • Color: white with black imprint. Eurostrip Ordering Information TS2.5, TSF2.5 TS6, TSF6 Cat. No. Desc. TSF16 Std. Pk. Cat. No. Desc. 41.200 Blank 25 41.201 Consecutive No. 1-12 25 41.202 Consecutive No. 13-24 25 Std. Pk. Cat. No. Desc. 41.400 Blank 41.401 Consecutive No. 1-12 41.402 Consecutive No. 13-24 25 25 25 41.600 Blank 41.601 Consecutive No. 1-12 41.602 Consecutvie No. 13-24 Std. Pk. 25 25 25 IMPRINTING Imprinting Mark individual pole positions to save installation time and facilitate wire hook-up, system modification and trouble shooting. Choose turret or ledge marking for optimum identification. To order imprinting specify consecutive, identical or custom character imprints; and marking location - Turret (T) or Ledge (L). • Imprints: rub-resistant, black ink. Turret Location Ledge Location Imprint Turet Location Ledge Location Marking Instruction Consecutive, imprint 1 through 12, Turret Location Identical, imprint 1, Ledge Location Ordering Example Cat. No. Std. Pk. Cat. No. Std. Pk. TS1.5/12wp-i(1-12)T 1000 TS2.5/12wp-i(1)L 1000 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 49 E7 HIGH TEMPERATURE CERAMIC EUROBLOCKS™ Wire Range 4.0 mm2 6.0 mm2 16.0 mm2 Voltage Rating 450 V 450 V 450 V Current Rating 24A 32 A 41 A No. of Poles Cat. No. Std. Pk. Cat. No. Std. Cat. No. Std. Pk. E71 E72 E73 10 10 10 E81 E82 E83 10 10 5 E91 E92 E93 5 5 5 1 2 3 B1 A • Compact, space saving • Tubular screw clamp • Free float or panel mount • Temperature range: -20°C to 800°C (-4°F to 1472°F) • Standard color: beige • Material Housing: steatite Clamp: brass Screws: zinc plated steel E9 B2 B3 C Suitable for use in high temperature applications up to 800°C (1472°F). Applications include hot melt glue guns, furnaces, heaters, process equipment and machinery. Terminal blocks are offered with mounting holes for panel mounting or free floating applications. E8 E D F Dimensions mm E7 A B1 B2 B3 C D E F 25 10 22 34 10.5 4 18.5 3.25 E8 26 11 24 37 10.5 4 20.5 4.1 E9 32.4 15 30 45 13 4 23 5.6 Note: All dimensions are shown in mm, to convert to inches please divide by 25.4. 50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com