562-735

Accessories Combination Kits Used to combine series specific enclosures to make larger units. Connect horizontally or vertically. Fitting Type Combination Kit Threaded with locknut seal for connecting sidewalls. Fits standard Pg knockouts. Drilling template included to ensure enclosure ingress integrity. Pin Type Combination Set For combining AK and AKL Series Enclosures for 150mm and 300mm sides. Type Wall Thickness For Series Cat. No. Std. Pack CK/M20 CK/M25 CK/M32 2x3 mm 2x3 mm 2x3.5 mm 192-020 192-025 192-032 1 1 1 CK/AKII AK, AKL 791-001 1 For Series Cat. No. Din Rails DIN rails allow for mounting DIN Terminal Blocks and other control components. All required hardware included. Type Std. Pack TS15x5 mm / for TK+Abox Series TS15/49.5 TS15/80 TS15/92 TS15/111 TS15/154 TK77, 97 TK97, 99 TK1111 TK1309, 1313 TK1809 197-049 197-080 197-092 197-111 197-154 1 1 1 1 1 TS15x5 mm / for TG Series TS15/68 TS15/106 TS15/110 TS15/131 TS15/146 TS15/186 TS15/170 TS15/222 TS15/285 TG88 TG1208 TG1212 TG1608 TG1612 TG2012 TG2015 TG2516 TG3023 197-069 197-107 197-110 197-131 197-146 197-186 197-170 197-222 197-285 1 1 1 1 1 1 1 1 1 TS35x7.5 mm / for TK+Abox Series TS35/81 TS35/106 TS35/144 TS35/144 TS35/216 TS35/216 TS35/336 TK1111, Abox060 TK1309, 1313, Abox100, HP150 TK1809,1811, 1818, HP190 Abox160 TK2518 Abox350 TK3625 198-081 198-106 198-144 894-016 198-216 894-035 198-336 1 1 1 1 1 1 1 TS35x7.5 mm / for TG Series TS35/68 TS35/106 TS35/110 TS35/131 TS35/146 TS35/186 TS35/170 TS35/222 TS35/285 TG88 TG1208 TG1212 TG1608 TG1612 TG2012 TG2015 TG2516 TG3023 198-068 198-107 198-110 198-131 198-146 198-186 198-170 198-222 198-285 1 1 1 1 1 1 1 1 1 TS35x7.5 mm / Special Variants CITS35/250 SMTS35/216 AKII, AKL AKII, AKL, EK12, 24 562-735 562-035 1 1 TS35x7.5 mm / for AL Series TS35/110 TS35/208 TS35/145 TS35/245 TS35/345 TS35/186 TS35/266 TS35/316 AL1212 AL2212 AL1616 AL2616 AL3616 AL2023 AL2823 AL3323 162-009 162-010 162-011 162-012 162-013 162-014 162-015 162-016 1 1 1 1 1 1 1 1 Type For Series Cat. No. Std. Pack WS/4x35 TK, EK 194-035 100 MS/4x12 MS/4x25 TK, EK TK, EK 194-412 194-425 100 100 Type For Series Cat. No. Std. Pack ST/3.9x9 mm ST/3.9x13 mm ST/3.9x17 mm ST/3.9x28 mm For All Plastic Series D-409 D-413 D-417 D-428 100 100 100 100 Enclosure Mounting Screws For mounting enclosures through corner holes. Wood Screws Machine Screws Component Mounting Screws For mounting DIN rails, mounting plates, etc. into molded base holes. - Select appropriate length - Self tapping Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 137 Accessories Hinge Kits For Series Cat. No. HK1 HK2 TGISS HK-AL TK77 - 1809, EK002 TK1811 - 3625, EK004 - 024, AK, AKL TGxx12 and TG2015-TG3023 AL1212 - AL3323 190-002 190-005 182-001 154-210 Replacements for existing screws. Type For Series Cat. No. Short-Gray Long-Gray Short-Black Long-Black TKLS-SG TKLS-LG TKLS-SB TKLS-LB TK - low cover, gray TK - high cover, gray TK - low cover, transparent TK - high cover, transparent 190-010 190-011 190-012 190-013 1 1 1 1 Thumb Screw Caps TS TK, EK, AK, AKL 190-001 1 Type For Series Cat. No. KL Locksets with two keys easily install into hinged transparent doors. KL2 AK 706-102 1 Enclosure Padlock and Hinge set with all mounting accessories. PL AK, AKL, TK1811 & up 190-100 1 Type For Series Cat. No. Attach the enclosure cover and base together Type for easy opening and closing of the enclosure. All required hardware and instructions are included. Small Plastic Large Plastic TG Internal Plastic Metal Enclosure Lid Screws Std. Pack 1 1 1 1 Std. Pack Locksets Locksets prevent the unauthorized opening of enclosure lids or doors. Mounting Tabs Enables enclosure to be surface mounted. 1 set = 4 mounting tabs Plastic Metal Std. Pack MT1 TGABL TK, EK TG 194-001 182-002 1 1 MT2 MT-AL1 MT-AL2 AKL, AK14 and up AL66-3 to AL1010-8 AL1212-8 to AL3323-11 793-004 154-004 154-006 1 1 1 Snap In and Threaded Entry Spouts and Vents Mounting Hole Type Cable Dia. mm (in.) Cat. No. Std. Pack Snap In Double Membrane Entry Seals - Fits and seals removed Pg knockouts - IP66 - Features two integral sealing membranes M16 M20 M25 M32 5 - 9 (.20 - .35) 7 - 12 (.28 - .47) 9 - 16 (.35 - .63) 14 - 21 (.55 - .83) 260-416 260-420 260-425 260-432 50 50 50 25 Universal Snap In Entry Seal - IP55 - Polyethelyene - Cut steps to fit desired cable size M20 M25 M32 5 - 16 (.20 - .63) 5 - 21 (.20 - .83) 13 - 26.5 (.51 - 1.04) 216-420 216-425 216-432 100 50 25 M20 N/A 262-420 100 M12 N/A 262-412 5 Snap In Air Vents - Allows moisture to escape from the enclosure - Labyrinth seal to prevent water formation - IPX4 Threaded Vent - M12x1.5 - Provides pressure compensation - Air permeable and water-tight membrane - Reduces condensation formation - IP68 138 Std. Pack Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Accessories Mounting Plates Type Enclosure Series Size mm (in.) Cat. No. TKMPI-55 TKMPI-75 TKMPI-77 TKMPI-97 TKMPI-99 TKMPI-1111 TKMPI-1309 TKMPI-1313 TKMPI-1809 TKMPI-1811 TKMPI-1818 TKMPI-2518 TKMPI-3625 TK55 TK75 TK77 TK97 TK99 TK1111 TK1309 TK1313 TK1809 TK1811 TK1818 TK2518 TK3625 46x44 (1.81x1.73) 59x44 (2.32x1.73) 45x45 (1.77x1.77) 74x45 (2.91x1.77) 74x74 (2.91x2.91) 90x90 (3.54x3.54) 110x74 (4.33x2.91) 110x110 (4.33x4.33) 160x74 (6.30x2.91) 150x90 (5.91x3.54) 150x150 (5.91x5.91) 220x150 (8.66x5.91) 331x220 (13.03x8.66) 195-055 195-075 195-001 195-002 195-003 195-004 195-009 195-005 195-010 195-006 195-007 195-008 195-012 1 1 1 1 1 1 1 1 1 1 1 1 1 TKMPS-77 TKMPS-97 TKMPS-99 TKMPS-1111 TKMPS-1309 TKMPS-1313 TKMPS-1809 TKMPS-1811 TKMPS-1818 TKMPS-2518 TKMPS-3625 TK77 TK97 TK99 TK1111 TK1309 TK1313 TK1809 TK1811 TK1818 TK2518 TK3625 45x45 (1.77x1.77) 75x45 (2.95x1.77) 74x74 (2.91x2.91) 90x90 (3.54x3.54) 110x74 (4.33x2.91) 110x110 (4.33x4.33) 160x74 (6.30x2.91) 150x90 (5.91x3.54) 150x150 (5.91x5.91) 220x150 (8.66x5.91) 331x220 (13.03x8.66) 197-001 197-002 197-003 197-004 197-009 197-005 197-010 197-006 197-007 197-008 197-012 1 1 1 1 1 1 1 1 1 1 1 TGMPI-88 TGMPI-1208 TGMPI-1212 TGMPI-1608 TGMPI-1612 TGMPI-2012 TGMPI-2015 TGMPI-2516 TGMPI-3023 TG88 TG1208 TG1212 TG1608 TG1612 TG2012 TG2015 TG2516 TG3023 73x73 (2.87x2.87) 91X73 (3.58X2.87) 113x93 (4.45x3.58) 131x73 (5.16x2.87) 131x113 (5.16x3.58) 171x113 (6.73x3.58) 171x143 (6.73x5.63) 220x152 (8.66x5.98) 270x220 (10.63x5.98) 186-003 186-004 186-005 186-006 186-007 186-008 186-009 186-012 186-013 1 1 1 1 1 1 1 1 1 TGMPS-88 TGMPS-1208 TGMPS-1212 TGMPS-1608 TGMPS-1612 TGMPS-2012 TGMPS-2015 TGMPS-2516 TGMPS-3023 TG88 TG1208 TG1212 TG1608 TG1612 TG2012 TG2015 TG2516 TG3023 73x73 (2.87x2.87) 91X73 (3.58X2.87) 113x93 (4.45x3.58) 131x73 (5.16x2.87) 131x113 (5.16x3.58) 171x113 (6.73x3.58) 171x143 (6.73x5.63) 220x152 (8.66x5.98) 270x220 (10.63x5.98) 187-003 187-004 187-005 187-006 187-007 187-008 187-009 187-012 187-013 1 1 1 1 1 1 1 1 1 Abox Series Plastic laminate Color: Gray MP060 MP100 MP160 MP350 Abox060 Abox100 Abox160 Abox350 83x83 (3.27x3.27) 109x109 (4.29x4.29) 149x149 (5.87x5.87) 217x217 (8.54x8.54) 895-006 895-010 895-016 895-035 1 1 1 1 Aluminum Series Steel plates for the mounting and installation of large / heavy devices and components. - For AL Series only ALMPS-88 ALMPS-1308 ALMPS-1808 ALMPS-1010 ALMPS-1212 ALMPS-2212 ALMPS-1616 ALMPS-2616 ALMPS-3616 ALMPS-2023 ALMPS-2823 ALMPS-3323 AL88 AL1308 AL1808 AL1010 AL1212 AL2212 AL1616 AL2616 AL3616 AL2023 AL2823 AL3323 68.8x64 (2.71x2.52) 114x68.8 (4.49x2.71) 164x68.8 (6.46x2.71) 88x88 (3.46x3.46) 109x107 (4.29x4.21) 207x107 (8.15x4.21) 145x143 (5.71x5.63) 245x143 (9.65x5.63) 345x143 (13.6x5.63) 214x184 (8.43x7.24) 264x214 (10.4x8.43) 314x214 (12.4x8.43) 155-005 155-006 155-007 155-008 155-009 155-010 155-011 155-012 155-013 155-014 155-015 155-016 1 1 1 1 1 1 1 1 1 1 1 1 AK Series Plastic laminate 4 mm (.16 in) thick Color: Gray AKMPI 1 AKMPI 2 AKMPI 3 AKMPI 4 AK, AKL AK, AKL AK, AKL AK, AKL 240x112 (9.45x4.41) 240x240 (9.45x9.45) 240x390 (9.45x15.35) 240x540 (9.45x21.26) 795-001 795-002 795-003 795-004 1 1 1 1 Steel 2.0 mm (0.08 in) thick. AKMPS 2 AKMPS 3 AKMPS 4 AK, AKL AK, AKL AK, AKL 240x240 (9.45x9.45) 240x390 (9.45x15.35) 240x540 (9.45x21.26) 795-012 795-013 795-014 1 1 1 TK Series Complete with screws. Hole patterns match mounting provisions in enclosure base. Plastic laminate 2.5 mm (.10 in) thick. Color: Gray Steel 2.0 mm (.08 in) thick. TG Series Plastic laminate 2.5 mm (.10 in) thick. Color: Gray Steel 2.0 mm (0.08 in) thick. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Std. Pack 139 Locknut ® External Thread Pressure Fingers Pressure Dome (sold separately) Thread for Pressure Dome Sealing Sleeve UL R • Increased Cable Range - The specially designed pressure fingers allow for up to 60% wider cable range. • IP68 achieved without seal rings - The redesigned integral sealing ridge obtains an IP68 protection rating without the use of seal rings. Material: • Body: Polyamide 6 • Seal: Neoprene • Trapezoidal thread with high torque guarantees tight and permanent fit of the dome nut • Gas- and watertight Applications: • Machines and devices Opened Temperature Range PA6 Neoprene -25 to 100°C -25 to 100°C (-13 to 212°F) (-13 to 212°F) Cable Gland, Polyamide, Metric Thread Cable Range mm Cat. No. Light grey Cat. No. Black Std. Pk. M M M M M M M M M M M M M M M M M M M M M M 1.5-5 2.5-6.5 1.5-6 2-7 2.5-8 3.5-10 3-9 5-12 5-12 7-14 5-12 7-16 7-14 9-18 11-21 14-25 13-26 18-32 17-31 24-38.5 26-39 35-48 5309612 5308950 5309615 5309616 5308958 5308951 5309619 5309620 5308959 5308952 5309624 5309625 5308960 5308953 5309632 5308954 5309640 5308955 5309650 5308956 5309663 5308957 5309712 5308940 5309715 5309716 5308948 5308941 5309719 5309720 5308949 5308942 5309724 5309725 5308962 5308943 5309732 5308944 5309740 5308945 5309750 5308946 5309763 5308947 100 100 50 50 50 50 50 50 50 50 50 25 50 25 20 20 10 10 5 5 5 5 12 12 16 16 16 16 20 20 20 20 25 25 25 25 32 32 40 40 50 50 63 63 x 1.5 x 1.5 x 1.5/9 x 1.5/11 x 1.5/9 x 1.5/11 x 1.5/13 x 1.5/16 x 1.5/13 x 1.5/16 x 1.5/16 x 1.5/21 x 1.5/16 x 1.5/21 x 1.5 x 1.5 x 1.5 x 1.5 x 1.5 x 1.5 x 1.5 x 1.5 Lock Nuts, Polyamide, Metric Thread Metric M 12 x M 16 x M 20 x M 25 x M 32 x M 40 x M 50 x M 63 x 140 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Insert Neoprene Dome Nut PA 6 E H Thread Size M12x1.5 M16x1.5/9 M16x1.5/11 M20x1.5/13 M20x1.5/16 M25x1.5/16 M25x1.5/21 M32x1.5 M40x1.5 M50x1.5 M63x1.5 H mm 15 19 22 24 27 27 33 42 53 60 70 L E mm 8 10 10 10 10 10 10 10 10 12 12 Dimensions L ØC mm mm 32 6.7 37 8.5 39 10.5 40 12.5 43 14.5 45 14.5 49 18.5 52 25.5 62 32.5 67 39.0 68 48.5 ØP mm 6.8 8.5 10.5 12.5 14.5 14.5 18.5 25.5 32.5 39.0 48.5 ØThread mm 12.0 16.0 16.0 20.0 20.0 25.0 25.0 32.0 40.0 50.0 63.0 Temperature Range PA -30 to 120°C (-22 to 248°F) Material: • Polyamide 6 • 25 % Glass fiber Reinforced Thread Body PA 6 NPT/M P Thread Tightened C Technical properties: • Maximum strain relief through clamping range • IP68 achieved without seal rings (PG and metric only) Thickness (E) mm SW mm Cat. No. Light grey Cat. No. Black Std. Pk. 5 5 5 6 7.5 8 9 10 19 22 24 30 38 50 60 75 7211979 7211980 7211981 7211982 7211983 7211984 7211985 7211986 7211974 7211975 7211976 7211977 7211978 7211990 7211991 7211992 50 50 50 50 50 20 10 5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com