611.6169.016

Technical Data Safety switch Series SKC- with separate actuator Description SKC-A1Z F30 M Article number 6116169016 Operating symbol 27 28.5 40 7.5 52 Terminal screw acc. to DIN 912 M5 10.5 8 40 ø5.2 5 8 18 29 7 Actuator withdrawn Ø5.5 fixed location for safety application 75 21.5mm M16 x 1,5 11-12 Operating diagram 17.5 5.5 13 M16x1.5 14.5 40 0mm 14 8 30 S0 inserted 30 On Off 33 8 6 5 ø5.5 52 Tolerance: Operating Point ± 0,25 mm; Operating force ± 10 % Electrical Data Rated insulation voltage Conv. thermal current Utilization category Direct opening action Short-circuit protective device Protection class Ui Ithe p 250 V AC 5A AC-15, Ue /Ie 240 V / 1,5 A according to IEC/EN 60947-5-1, Annex K Fuse 6 A gG II, totally insulated BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu Technical modifications and errors excepted. The technical datasheet corresponds to the technical state as of 2016-07-04 and will not be removed in case of changes. Page 1 of 2 6116169016 / 2208-16 Technical Data Mechanical data Enclosure Cover Actuator Extraction force Ambient air temperature Contact type Mechanical life Switching frequency Assembly Safety switch Actuator Connection Conductor cross-sections Cable entrance Weight Installation position Protection type Thermoplastic, glass fibre reinforced (UL94-V0) Thermoplastic, glass fibre reinforced (UL94-V0) Separate actuator (G-stainless steel) 30 N -30 °C … +80 °C 1 NC (Y) 1 x 106 switch operations ≤ 30 / min. 2 x M5 2 x M5 2 screw connections (M3,5) Solid: 0,5 ... 1,5 mm² Litz wire with ferrules: 0,5 ... 1,5 mm² 3 x M16 x 1,5 ≈ 0,13 kg operator definable IP65 acc. to IEC/EN 60529 ID for safety engineering B10d 2 x 106 switching cycles Actuation Turning the cap (pos A/B) allows 4 different directions of drive. Cover (1) has to be opened before turning the cap (2). Insert the screwdriver into the gap between housing and cap and turn until the cap snaps off. Remove the cap, turn it 180° (4), latch it into the housing and close the cover. Standards VDE 0660 T100, DIN EN 60947-1, IEC 60947-1 VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1 DIN EN ISO 13849-1 EU Conformity acc. to directive 2006/42/EC Approvals TÜV Rheinland, Product Safety CCC B300 (same polarity) CCSAUS Notes R min. R min . 150 150 22 s 0 7.5 The degree of protection (IP code) specified applies solely to a property closed cover and the use of an equivalent cable gland with adequate cable. The switch may not be used as a mechanical stop. Radial actuation may reduce the mechanical life. The min. radius refers to a pivot at the top of the cap (S0). Tapped holes not in use must be closed with blind plugs. 16 BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu Technical modifications and errors excepted. The technical datasheet corresponds to the technical state as of 2016-07-04 and will not be removed in case of changes. Page 2 of 2 6116169016 / 2208-16