810-410

Abox Series The Abox family consists of six enclosures that feature an attractive modern design and shape that allow for optimum use of installation space.  Each enclosure has either membranes or knockouts on each sidewall and on the backside. Most enclosures in the family can maintain IP65 protection with the use of complementary IP65 cable glands.  The dual membrane models are IP65, without the addition of cable glands. Two of the six enclosures in this family feature "Dual Molding Technology".  This feature incorporates rubber membranes molded right into the polystyrene body.  This allows the user to simply push wires through the membrane or cut them out to install a cable gland.  These access holes can accommodate metric cable glands and entry spouts. • • • Two to four high grade self taping screws  secure the lid Tongue and groove sealing system with  polyurethane gasket Made from non-flammable Polystyrene Abox Enclosures are available in sizes ranging from 80 x 80 x 52 mm (3.15 x 3.15 x 2.05 in.) to 250 x 250 x 115 mm (9.84 x 9.84 x 4.53 in.). 78 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com ABOX Enclosure Series Metricmembranes Enclosure seal Metric-membranes Metricbasemembrane Covers for mounting screws Metricmembranes CONVENIENCE AND RELIABILITY Abox Enclosures are manufactured in Polystyrene and are approved by several international test agencies. The unique design of MetricMembranes allows for installation of large or small cables, cable glands, conduits, and entry spouts while ensuring that the enclosure remains sealed and all housed components are protected. High-Set Terminal A MODERN TERMINAL TECHNIQUE With our new Abox Enclosures wiring is as easy as 1-2-3. Large numbers of cables from AWG 18 to AWG 2 depending on the enclosure size, can be easily installed. The square shape of the enclosure and the domed cover provide ample room for even the toughest wiring job. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 79 Abox 025 – Polystyrene – 80 x 80 mm (3.15 x 3.15 in.) Standard Features • Protection Level: • Technical: IP65 Self Sealing Soft Elastic Membranes Suitable for Metric Entry M20 - 2 to 16mm • Sealing Area: • UL Recognized Enclosure Material: • Gasket Material: • Color: • Material Temperature Range: • Accessories: Polystyrene Polyurethane Light Gray or White Polystyrene -25˚C to 70˚C (-13˚F to 158˚F) See section below Abox Ordering Information Cat. No. Color Terminal Enclosure with terminals Enclosure with terminals Enclosure - empty Enclosure - empty 802-407 802-107 802-907 802-607 gray white gray white 2.5 mm2 - 5 pole 2.5 mm2 - 5 pole NA NA Cat. No. Type Length Dimensions mm (in) Width Height 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) Std. Pk. 52 mm (2.05 in) 52 mm (2.05 in) 52 mm (2.05 in) 52 mm (2.05 in) 3 3 3 3 Accessories Ordering Information Std. Pk. Terminal (base mount) 840-004 2.5/4 mm2 - 5 pole 10 Please refer to pages 136-140 for additional accessories and detailed information. 80 mm (3.15 in) 52 mm (2.05 in) 80 mm (3.15 in) Mount Holes ( 5 mm) at the bottom 80 mm (3.15 in) Knockout Detail 46 mm (1.81 in) M16 80 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Abox 025AB – Polystyrene – 80 x 80 mm (3.15 x 3.15 in.) Standard Features • Protection Level: • Technical: • Sealing Area: • UL Recognized Enclosure Material: • Gasket Material: • Color: • Material Temperature Range: • Accessories: IP65 Self Sealing Soft Elastic Membranes Suitable for Metric Entry M20 - 2 to 16mm Polystyrene Polyurethane Light Gray or White Polystyrene -25˚C to 70˚C (-13˚F to 158˚F) See section below Abox Ordering Information Cat. No. Color Terminal Enclosure with terminals Enclosure with terminals Enclosure - empty Enclosure - empty 803-407 803-107 803-907 803-607 gray white gray white 2.5 mm2 - 5 pole 2.5 mm2 - 5 pole NA NA Cat. No. Type Length 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) Dimensions mm (in) Width Height 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) 80 mm (3.15 in) Std. Pk. 52 mm (2.05 in) 52 mm (2.05 in) 52 mm (2.05 in) 52 mm (2.05 in) 3 3 3 3 Accessories Ordering Information Std. Pk. Terminal (base mount) 840-004 2.5/4 mm2 - 5 pole 10 Please refer to pages 136-140 for additional accessories and detailed information. 80 mm (3.15 in) 52 mm (2.05 in) 80 mm (3.15 in) Mount Holes ( 5 mm) at the bottom 80 mm (3.15 in) Knockout Detail 46 mm (1.81 in) M16 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 81 Abox 040 – Polystyrene – 93 x 93 mm (3.66 x 3.66 in.) Standard Features • Protection Level: • Technical: • Sealing Area: • UL Recognized Enclosure Material: • Gasket Material: • Color: • Material Temperature Range: • Accessories: IP65 Self Sealing Soft Elastic Membranes Suitable for Metric Entry M20 - 2 to 16mm Polystyrene Polyurethane Light Gray or White Polystyrene -25˚C to 70˚C (-13˚F to 158˚F) See section below Abox Ordering Information Cat. No. Color Terminal Enclosure with terminals Enclosure with terminals Enclosure - empty Enclosure - empty 804-407 804-107 804-907 804-607 gray white gray white 4 mm2 - 5 pole 4 mm2 - 5 pole NA NA Length Dimensions mm (in) Width Height 93 mm (3.66 in) 93 mm (3.66 in) 93 mm (3.66 in) 93 mm (3.66 in) 93 mm (3.66 in) 93 mm (3.66 in) 93 mm (3.66 in) 93 mm (3.66 in) Std. Pk. 55 mm (2.17 in) 55 mm (2.17 in) 55 mm (2.17 in) 55 mm (2.17 in) 3 3 3 3 Accessories Ordering Information Cat. No. Std. Pk. Type Terminal (base mount) 840-004 2.5/4 mm2 - 5 pole 10 Please refer to pages 136-140 for additional accessories and detailed information. 93 mm (3.66 in) 55 mm (2.17 in) 93 mm (3.66 in) Mount Holes ( 5 mm) at the bottom 93 mm (3.66 in) Knockout Detail 59 mm (2.32 in) M16 82 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Abox 060 – Polystyrene – 110 x 110 mm (4.33 x 4.33 in.) Standard Features • Protection Level: • Technical: • UL Recognized IP54* / IP65** Knockout Sidewalls Enclosure Material: • Gasket Material: • Color: • Material Temperature Range: • Included Accessories: • Accessories: Polystyrene Polyurethane Light Gray or White Polystyrene -25˚C to 70˚C (-13˚F to 158˚F) (4) M25 Entry Spouts for Cables 9-18mm (1) M25 Sealing Plug See section below * With Supplied Entry Spouts ** As Equipped or With Optional IP65 Cable Glands Abox Ordering Information Cat. No. Color Terminal Enclosure with terminals Enclosure - empty 806-407 806-907 gray gray 6 mm2 - 5 pole NA Cat. No. Type Length Dimensions mm (in) Width Height 110 mm (4.33 in) 110 mm (4.33 in) 110 mm (4.33 in) 110 mm (4.33 in) Std. Pk. 67 mm (2.64 in) 67 mm (2.64 in) 2 2 Accessories Ordering Information Std. Pk. Mounting Plate 895-006 MP060 1 DIN Rail TS 35 – 35x81 mm 198-081 TS 35/81 1 Terminal (high-set) 840-006 6 mm2 - 5 pole 5 Please refer to pages 136-140 for additional accessories and detailed information. 67 mm (2.64 in) 50 mm (1.97 in) 110 mm (4.33 in) 110 mm (4.33 in) Mount Holes ( 5 mm) at the bottom 110 mm (4.33 in) Knockout Detail 50 mm (1.97 in) M16 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 83 Abox 100 – Polystyrene – 140 x 140 mm (5.51 x 5.51 in.) Standard Features • Protection Level: • Technical: • UL Recognized Enclosure Material: • Gasket Material: • Color: • Material Temperature Range: • Included Accessories: • Accessories: IP54* / IP65** Knockout Sidewalls Polystyrene Polyurethane Light Gray or White Polystyrene -25˚C to 70˚C (-13˚F to 158˚F) (4) M32 Entry Spouts for Cables 11-23mm (1) M32 Sealing Plug See section below * With Supplied Entry Spouts ** As Equipped or With Optional IP65 Cable Glands Abox Ordering Information. Cat. No Color Terminal Enclosure with terminals Enclosure - empty 810-410 810-910 gray gray 10 mm2-5 pole NA Cat. No. Type Dimensions mm (in) Width Height Length 140 mm (5.51 in) 140 mm (5.51 in) 140 mm (5.51 in) 140 mm (5.51 in) Std. Pk. 79 mm (3.11 in) 79 mm (3.11 in) Accessories Ordering Information Std. Pk. Mounting Plate 895-010 MP100 1 DIN Rail TS 35 – 35x106 mm 198-106 TS 35/106 1 Terminal (high-set) 840-010 10 mm2 - 5 pole 5 Please refer to pages 136-140 for additional accessories and detailed information. 79 mm (3.11 in) 80 mm (3.15 in) Mount Holes ( 5 mm) at the bottom 140 mm (5.51 in) 80 mm (3.15 in) Knockout Detail 140 mm (5.51 in) M16 84 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 2 2 Abox 160 – Polystyrene – 180 x 180mm (7.09 x 7.09 in.) Standard Features • Protection Level: • Technical: • UL Recognized Enclosure Material: • Gasket Material: • Color: • Material Temperature Range: • Included Accessories: • Accessories: IP54* / IP65** Knockout Sidewalls Polystyrene Polyurethane Light Gray or White Polystyrene -25˚C to 70˚C (-13˚F to 158˚F) (4) M40 Entry Spouts for Cables 17-30mm (1) M40 Sealing Plug (1) Tamper Kit See section below * With Supplied Entry Spouts **As Equipped or With Optional IP65 Cable Glands Abox Ordering Information Cat. No. Color Terminal Enclosure with terminals Enclosure - empty 816-410 816-910 gray gray 16/25 mm2-5 pole NA Cat. No. Type Length Dimensions mm (in) Width Height 180 mm (7.09 in) 180 mm (7.09 in) 180 mm (7.09 in) 180 mm (7.09 in) Std. Pk. 91 mm (3.58 in) 91 mm (3.58 in) 1 1 Accessories Ordering Information Std. Pk. Mounting Plate 895-016 MP160 1 DIN Rail TS 35 – 35x144 mm 894-016 TS 35/144 1 Terminal (high-set) 840-016 16/25mm2 - 5 pole 2 Please refer to pages 136-140 for additional accessories and detailed information. 91 mm (3.58 in) 120 mm (4.72 in) 180 mm (7.09 in) Mount Holes ( 5 mm) at the bottom 180 mm (7.09 in) 120 mm (4.72 in) Knockout Detail 180 mm (7.09 in) M16 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 85 Abox 350 – Polystyrene – 250 x 250 mm (9.84 x 9.84 in.) Standard Features • Protection Level: • Technical: • UL Recognized Enclosure Material: • Gasket Material: • Color: • Material Temperature Range: • Included Accessories: • Accessories: IP54* / IP65** Knockout Sidewalls Polystyrene Polyurethane Light Gray or White Polystyrene -25˚C to 70˚C (-13˚F to 158˚F) (4) M40 Entry Spouts for Cables 17-30mm (1) M40 Sealing Plug (1) Tamper Kit See section below * With Supplied Entry Spouts **As Equipped or With Optional IP65 Cable Glands Abox Ordering Information Cat. No. Color Terminal Enclosure with terminals Enclosure - empty 835-410 835-910 gray gray 35/25 mm2 - 5 pole NA Dimensions mm (in) Width Height Length 250 mm (9.84 in) 250 mm (9.84 in) 250 mm (9.84 in) 250 mm (9.84 in) Std. Pk. 115 mm (4.53 in) 115 mm (4.53 in) Accessories Ordering Information Cat. No. Std. Pk. Type Mounting Plate 895-035 MP350 1 DIN Rail TS 35 – 35x216 mm 894-035 TS 35/216 1 Terminal (high-set) 840-035 35/25 mm2 - 5 pole 1 Please refer to pages 136-140 for additional accessories and detailed information. 115 mm (4.53 in) 250 mm (9.84 in) 184 mm (7.24 in) Mount Holes ( 5 mm) at the bottom 250 mm (9.84 in) 184 mm (7.24 in) Knockout Detail 250 mm (9.84 in) M16 86 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 1 1