86.600

PREVIOUS HOME NEXT FIND IT STANDARD BEND PROTECTION Polyamide (PA) • IP68 (NEMA1, 2, 3, 3R, 4, 4X, 5, 6, 12, 13). • PG, NPT standard. Metric available. • Integral Sealing Ridges (Only PG7 to PG21 and NPT3/8 to NPT3/4). Order Seal Rings separately if required. • Standard Color: Light Gray and Black. Body Temperature Ranges Sealing Sleeve Polyamide (PA) Neoprene (NE) Polyamide (PA) -20 to100°C (-4 to 212°F) -40 to 100°C (-40 to 212°F) with Neoprene (NE) Sealing Sleeve Liquid Tight Strain Reliefs (Cord Grips) Cat. No. Std. Lt. Gray Black Pk. 06 80.300 80.310 50 08 80.301 80.311 50 10 80.302 80.312 50 12 80.303 80.313 50 14 80.304 80.314 25 18 80.305 80.315 25 Cable Dia. mm (in.) 3.5 - 6.5 (.14 - .26) 4.0 - 8.0 (.16 - .31) 5.0 - 10.0 (.20 - .39) 6.0 - 12.0 (.24 - .47) 10.0 - 14.0 (.39 - .55) 13.0 - 18.0 (.51 - .71) Type PG7-SBPA PG9-SBPA PG11-SBPA PG13.5-SBPA PG16-SBPA PG21-SBPA - NE NE NE NE NE NE NPT3/8-SBPA NPT1/2-SBPA NPT3/4-SBPA - NE 10 80.306 80.316 50 5.0 - 10.0 (.20 - .39) NE 14 80.307 80.317 50 10.0 - 14.0 (.39 - .55) NE 18 80.308 80.318 25 13.0 - 18.0 (.51 - .71) Mtg. Hole Dia.1 Nearest Drill Size mm (in.) 13.0 (.51) 33/64 15.5 (.61) 39/64 19.0 (.74) 3/4 21.0 (.82) 53/64 23.0 (.90) 29/32 29.0 (1.14) 1-9/64 17.5 (.69) 21.5 (.85) 27.0 (1.06) 11/16 27/32 1-1/16 Seal Rings3 Polyethylene (PE) Locknuts2 Polyamide (PA) Cat. No. Opaque 86.600 86.601 86.602 86.603 86.604 86.605 Std. Pk. 100 100 100 100 50 50 Cat. No. Lt.. Gray Black 86.000 86.021 86.001 86.022 86.002 86.023 86.003 86.024 86.004 86.025 86.005 86.026 80.602 80.603 80.605 50 50 25 86.061 86.062 86.063 Std. Pk. 100 100 100 100 50 50 50 50 25 86.081 86.082 86.083 Body Color, Example: Light Gray L G or Black B K A ❲ ❲ ❲ ❲ C ❲ ❲ ❲ B + D ❲ ❲ F E ❲ ❲ Dimensions mm (in.) Size A B PG7 68.0 (2.67) 60.0 PG9 80.0 (3.14) 72.0 PG11 92.0 (3.62) 84.0 PG13.5 104.5 (4.11) 95.5 PG16 119.0 (4.68) 109.0 PG21 138.0 (5.43) 128.0 1 For installation into nonthreaded holes with Locknuts. Please refer to page 5 for installation instructions. 2 Order Locknuts separately if required. Please refer to page 54 for more information. 3 Order Seal Rings separately if required. Please refer to page 52 for more information. 18 C (2.36) (2.83) (3.30) (3.75) (4.29) (5.03) NPT3/8” 92.0 (3.62) 84.0 (3.30) NPT1/2” 119.0 (4.68) 109.0 (4.29) NPT3/4” 138.0 (5.43) 128.0 (5.03) D E F (.31) (.31) (.31) (.35) (.39) (.43) 12.5 (.49) 15.2 (.59) 18.6 (.73) 20.4 (.80) 22.5 (.88) 28.3 (1.11) 15.0 19.0 22.0 24.0 27.0 33.0 16.5 (.65) 21.0 (.82) 24.4 (.96) 26.6 (1.05) 30.0 (1.18) 36.6 (1.44) 15.0 (.59) 15.0 (.59) 15.0 (.59) 17.2 (.68) 21.3 (.84) 26.7 (1.05) 22.0 27.0 33.0 24.3 (.96) 29.6 (1.17) 36.1 (1.42) 8.0 8.0 8.0 9.0 10.0 11.0 Installation To install, we recommend the use of Socket (Refer to page 53), Metric Open-end or Adjustable Wrenches. Please refer to column “E” in the Dimensions Table for sizes. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT HIGH PERFORMANCE STRAIGHT-THROUGH Brass, Nickel Plated (BN) • IP68 (NEMA 1, 2, 3, 3R, 4, 4X, 5, 6, 12, 13) / 10 Bar (140 psi). • PG standard. • Preinstalled Perbunan (PR) or Silicone (SI) Seal Ring. • Long Thread 15mm (.59 in.) available. • Order Locknuts separately if required. Brass, Nickel Plated (BN) with PVC Polyvinylchloride (PV) Tubular Sealing Insert Liquid Tight Strain Reliefs (Cord Grips) Body Material Body Temperature Range Sealing Insert Material Sealing Insert Temperature Range Sealing Insert Color Seal Ring Material Seal Ring Temperature Range Brass, Nickel Plated (BN) -40 to 300° C (-40 to 572°F) PVC Polyvinylchloride (PV) -20 to 80°C (-4 to 176°F) Multi Perbunan (PR) -20 to 120°C (-4 to 248°F) Std. Pk. Type Cable Dia. mm (in.) PG7-PSBNPG9-PSBNPG9-PSBNPG11-PSBNPG11-PSBNPG11-PSBNPG13.5-PSBNPG13.5-PSBNPG13.5-PSBN- - - 06 08 09 08 09 10 09 10 13 50 50 50 50 50 50 50 50 50 4.0 - 6.5 5.0 - 8.0 6.5 - 9.5 5.0 - 8.0 6.5 - 9.5 7.0 - 10.5 6.5 - 9.5 7.0 - 10.5 9.0 - 13.0 PG16-PSBNPG16-PSBNPG16-PSBNPG21-PSBNPG21-PSBNPG21-PSBNPG29-PSBNPG29-PSBNPG36-PSBNPG36-PSBNPG42-PSBNPG48-PSBN- - - 10 13 15 15 18 20 25 28 32 36 40 44 25 25 25 25 25 25 20 20 10 10 5 5 7.0 - 10.5 9.0 - 13.0 11.5 - 15.5 11.5 - 15.5 14.0 - 18.0 17.0 - 20.5 20.0 - 25.0 24.0 - 28.0 27.0 - 32.0 32.0 - 36.0 36.0 - 40.0 39.0 - 44.0 (.16(.20(.26(.20(.26(.28(.26(.28(.35- .26) .31) .37) .31) .37) .41) .37) .41) .51) (.28- .41) (.35- .51) (.45- .61) (.45- .61) (.55- .71) (.67- .81) (.79- .98) (.94-1.10) (1.06-1.26) (1.26-1.42) (1.42-1.57) (1.54-1.73) Mtg. Hole Dia.1 Nearest mm (in.) Drill Size Cat. No. Sealing Insert Color 33/64 39/64 39/64 3/4 3/4 3/4 53/64 53/64 53/64 70.300 70.301 70.302 70.303 70.304 70.305 70.306 70.307 70.308 Yellow Gray Black Gray Black Green Black Green Red 23.0 (.91) 29/32 23.0 (.91) 29/32 23.0 (.91) 29/32 29.0 (1.14) 1-9/64 29.0 (1.14) 1-9/64 29.0 (1.14) 1-9/64 37.5 (1.48) 1-31/64 37.5 (1.48) 1-31/64 47.5 (1.87) 1-7/8 47.5 (1.87) 1-7/8 54.5 (2.15) 2-5/32 60.0 (2.36) 2-3/8 70.309 70.310 70.311 70.312 70.313 70.314 70.315 70.316 70.317 70.318 70.319 70.320 Green Red White White Blue Brown Orange Light Yellow Dark Gray Rose White White 13.0 15.5 15.5 19.0 19.0 19.0 21.0 21.0 21.0 (.51) (.61) (.61) (.75) (.75) (.75) (.83) (.83) (.83) Sealing Insert Material, Example: PVC Polyvinylchloride P V or Santoprene S T or TPE Polyoefin T P or Silicone S I A ❲ B Dimensions mm (in.) Size A ❲ ❲ C ❲ ❲ ❲ ❲ + D ❲ ❲ F ❲ 1 E ❲ For installation into nonthreaded holes with Locknuts. Please refer to page 5 for installation instructions. 32 PG7 PG9 PG11 PG13.5 PG16 PG21 PG29 PG36 PG42 PG48 25.0 26.0 26.0 27.5 27.5 32.0 35.0 37.0 40.0 40.0 (.98) (1.02) (1.02) (1.08) (1.08) (1.26) (1.38) (1.46) (1.57) (1.57) B 20.0 20.0 20.0 21.0 21.0 25.0 27.0 28.0 30.0 30.0 (.79) (.79) (.79) (.83) (.83) (.98) (1.06) (1.10) (1.18) (1.18) C 5.0 6.0 6.0 6.5 6.5 7.0 8.0 9.0 10.0 10.0 D (.20) (.24) (.24) (.26) (.26) (.28) (.31) (.35) (.39) (.39) 12.5 15.2 18.6 20.4 22.5 28.3 37.0 47.0 54.0 59.3 (.49) (.60) (.73) (.80) (.89) (1.11) (1.46) (1.85) (2.13) (2.33) E 14.0 17.0 20.0 22.0 24.0 30.0 40.0 50.0 57.0 64.0 F 15.5 18.9 22.2 24.4 26.7 33.5 43.5 54.0 61.0 69.0 (.61) (.74) (.87) (.96) (1.05) (1.32) (1.71) (2.24) (2.40) (2.72) Installation To install, we recommend the use of Socket (Refer to page 53), Metric Open-end or Adjustable Wrenches. Please refer to column “E” in the Dimensions Table for sizes. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 PREVIOUS HOME NEXT FIND IT HIGH PERFORMANCE EMI / RFI Brass, Nickel Plated (BN) Provide sealing and strain relief plus shielding against electromagnetic and radio frequency interference. For more information about EMI / RFI Cord Grips, please refer to page 26. • IP68 (NEMA 1, 2, 3, 3R, 4, 4X, 5, 6, 12, 13) / 10Bar (140 psi). Brass, Nickel Plated (BN) with Santoprene (ST) Tubular Sealing Insert • PG standard. • Preinstalled Perbunan (PR) Seal Ring. • Order EMI / RFI or regular Locknuts separately if required. Please refer to pages 26 for general information and page 54 for ordering. Liquid Tight Strain Reliefs (Cord Grips) Body Material Body Temperature Range Sealing Insert Material Temperature Range Sealing Insert Color Seal Ring Material Seal Ring Temperatuer Range Brass, Nickel Plated (BN) -40 to 300°C (-40 to 572°F) Santoprene (ST) -60 to 125°C (-65 to 257°F) Beige Perbunan (PR) -20 to 120°C (-4 to 248°F) Std. Pk. Type ShieldDia.Min. ShieldDia.Min. Mtg. Hole Dia.1 mm (in.) mm (in.) mm (in.) CableDia. mm (in.) Nearest Drill Size Cat.No. PG9-STBN-BNST 06 PG9-STBN-BNST 09 PG11-STBN-BNST 06 PG11-STBN-BNST 09 PG11-STBN-BNST 10 PG13.5-STBN-BNST 06 PG13.5-STBN-BNST 09 PG13.5-STBN-BNST 10 5 5 5 5 5 5 5 5 4.0 - 6.0 7.0 - 9.5 6.0 - 8.0 6.0 - 9.5 8.0 - 10.5 4.0 - 6.0 6.0 - 9.5 8.0 - 10.5 (.16(.27(.24(.24(.31(.16(.24(.31- .24) .37) .31) .37) .41) .24) .37) .41) 1.5 1.5 3.0 3.5 4.0 2.5 5.0 5.0 (.06) (.06) (.12) (.14) (.16) (.10) (.20) (.20) 4.0 6.5 7.0 8.0 8.5 6.0 8.0 8.0 (.16) (.26) (.28) (.31) (.33) (.24) (.31) (.31) 15.5 15.5 19.0 19.0 19.0 21.0 21.0 21.0 (.61) (.61) (.75) (.75) (.75) (.83) (.83) (.83) 39/64 39/64 3/4 3/4 3/4 53/64 53/64 53/64 71.300 71.301 71.302 71.303 71.304 71.305 71.306 71.307 PG16-STBN-BNST 09 PG16-STBN-BNST 10 PG16-STBN-BNST 11 PG16-STBN-BNST 14 PG16-STBN-BNST 16 PG21-STBN-BNST 10 PG21-STBN-BNST 14 PG21-STBN-BNST 16 PG21-STBN-BNST 18 PG21-STBN-BNST 20 5 5 5 5 5 3 3 3 3 3 6.0 - 9.5 8.0 - 10.5 10.0 - 11.5 10.0 - 14.0 14.0 - 16.5 8.0 - 10.5 10.0 - 14.0 14.0 - 16.5 15.0 - 18.0 17.0 - 20.0 (.24(.31(.39(.39(.55(.31(.39(.55(.59(.67- .37) .41) .45) .55) .65) .41) .55) .64) .71) .79) 6.0 6.0 6.5 8.0 8.0 8.0 8.0 8.0 12.5 12.5 (.24) (.24) (.26) (.31) (.31) (.31) (.31) (.31) (.49) (.49) 9.0 9.0 10.0 12.0 12.0 10.0 12.0 12.0 17.5 17.5 (.35) (.35) (.39) (.47) (.47) (.39) (.47) (.47) (.69) (.69) 23.0 23.0 23.0 23.0 23.0 29.0 29.0 29.0 29.0 29.0 (.91) (.91) (.91) (.91) (.91) (1.14) (1.14) (1.14) (1.14) (1.14) 29/32 29/32 29/32 29/32 29/32 1-9/64 1-9/64 1-9/64 1-9/64 1-9/64 71.308 71.309 71.310 71.311 71.312 71.313 71.314 71.315 71.316 71.317 PG29-STBN-BNST 23 PG29-STBN-BNST 27 PG36-STBN-BNST 30 PG36-STBN-BNST 32 PG42-STBN-BNST 41 1 1 1 1 1 19.0 - 23.0 (.74- .90) 15.0 22.0 - 27.0 (.86-1.06) 15.0 25.0 - 30.0 (.98-1.18) 18.0 29.0 - 32.0 (1.14-1.26) 24.0 37.0 - 41.0 (1.45-1.61) 29.0 (.59) (.59) (.71) (.94) (1.14) 21.0 21.0 25.0 30.0 33.0 (.83) (.83) (.98) (1.18) (1.30) 37.5 37.5 47.5 47.5 54.5 (1.48) (1.48) (1.87) (1.87) (2.15) 1-31/64 1-31/64 1-7/8 1-7/8 2-5/32 71.318 71.319 71.320 71.321 71.322 Dimensions mm (in.) Size A B ❲ C C D E F ❲ ❲ ❲ B ❲ ❲ ❲ A + D ❲ ❲ F ❲ 1 E PG9 PG11 PG13.5 PG16 PG21 PG29 PG36 PG42 41.0 41.0 41.0 43.0 44.0 52.0 59.0 65.0 (1.61) (1.61) (1.61) (1.70) (1.73) (2.05) (2.32) (2.56) 31.0 31.0 31.0 32.0 34.0 39.0 45.0 50.0 (1.22) (1.22) (1.22) (1.26) (1.34) (1.54) (1.77) (1.97) 10.0 10.0 10.0 11.0 12.0 13.0 14.0 15.0 (.39) (.39) (.39) (.43) (.47) (.51) (.55) (.59) 15.2 18.6 20.4 22.5 28.3 37.0 47.0 54.0 (.60) (.73) (.80) (.89) (1.11) (1.46) (1.85) (2.13) 24.0 24.0 24.0 30.0 30.0 40.0 50.0 60.0 26.7 26.7 26.7 33.5 33.5 43.5 54.0 65.0 (1.05) (1.05) (1.05) (1.32) (1.32) (1.71) (2.13) (2.56) ❲ For installation into nonthreaded holes with Locknuts. For additional information please refer to the Installation Worksheet, page 55. Installation To install, we recommend the use of Socket (Refer to page 53), Metric Open-end or Adjustable Wrenches. Please refer to column “E” in the Dimensions Table for sizes. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 47 PREVIOUS HOME NEXT FIND IT LOCKNUTS Use Locknuts to install Cord Grips into nonthreaded holes • PG, NPT standard. • Metric available. • Standard color: Light Gray and Black Polyamide (PA), Brass, Nickel Plated (BN) or Stainless Steel (SS). Polyamide (PA) Brass, Ni Plated (BN) EMI / RFI Brass, Ni Plated (BN) Stainless Steel (SS) Ordering Information Temperature Range -20 to 100°C (-4 to 212°F) Size PG7PG9PG11PG13.5PG16PG21PG29PG36PG42PG48- -40 to 300°C (-40 to 572°F) -50 to 500°C (-65 to 932°F) -40 to 300°C (-40 to 572°F) Cat. No. Gray Black Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. AL AL AL AL AL AL AL AL AL AL - 86.000 86.001 86.002 86.003 86.004 86.005 86.006 86.007 86.008 86.009 86.021 86.022 86.023 86.024 86.025 86.026 86.027 86.028 86.029 86.030 100 100 100 100 50 50 25 10 5 5 86.500 86.501 86.502 86.503 86.504 86.505 86.506 86.507 86.508 86.509 100 100 50 50 50 50 25 10 5 5 86.520 86.521 86.522 86.523 86.524 86.525 86.526 86.527 — — 10 10 10 10 5 5 2 2 — — — 86.740 86.741 86.742 86.743 86.744 86.745 86.746 — — — 10 10 10 5 5 2 2 — — NPT3/8- AL NPT1/2- AL NPT3/4- AL - 86.061 86.062 86.063 86.081 86.082 86.083 50 50 25 86.541 86.542 86.543 50 50 25 — — — — — — — — — — — — ❲ Color, Example: Light Gray L G or Black B K or Brass, Nickel Plated - - or Stainless Steel - Material, Example: Polyamide P A or Brass, Nickel Plated B N or Stainless Steel S S Dimensions + ❲ B E = Width Across Flats (mm.) B = Width Across “Tips” C = Thickness ❲ ❲ ❲ E Most Locknuts (Front View) C ❲ C ❲ Most Locknuts (Side View) ❲ EMI / RFI Locknuts (Side View) Locknut Material Size E B E B E B E B C PG7 PG9 PG11 PG13.5 PG16 19.0 22.0 24.0 27.0 30.0 21.0 (.83) 24.0 (.94) 26.0(1.02) 29.0(1.14) 33.0(1.30) 5.0 (.20) 5.0 (.20) 5.0 (.20) 6.0 (.24) 6.0 (.24) 15.0 18.0 21.0 23.0 26.0 16.6 (.65) 20.0 (.79) 23.5 (.93) 25.5(1.00) 29.0(1.14) 2.8 (.11) 2.8 (.11) 3.0 (.19) 3.0 (.19) 3.0 (.19) 17.0 19.0 22.0 24.0 27.0 21.1 (.83) 21.1 (.83) 22.3 (.88) 26.8(1.05) 30.2(1.19) 3.0 (.12) 3.0 (.12) 3.0 (.12) 3.0 (.12) 3.0 (.12) — 17.0 22.0 24.0 26.0 — 18.5 (.73) 24.4 (.96) 26.7 (1.05) 28.8 (1.13) — 6.0 (.24) 6.0 (.24) 6.0 (.24) 6.0 (.24) PG21 PG29 PG36 PG42 PG48 36.0 46.0 60.0 65.0 70.0 39.0(1.54) 50.0(1.97) 66.0(2.60) 73.0(2.87) 78.0(3.07) 7.0 (.28) 7.0 (.28) 8.0 (.32) 8.0 (.32) 8.0 (.32) 32.0 41.0 51.0 60.0 64.0 35.5(1.40) 45.0(1.77) 56.0(2.20) 65.0(2.56) 69.0(2.72) 3.5 (.14) 4.0 (.16) 5.0 (.20) 5.0 (.20) 5.5 (.22) 32.0 41.0 50.0 — — 35.8(1.41) 45.7(1.80) 55.8(2.19) — — 3.5 (.14) 4.0 (.16) 5.0 (.20) — — 35.0 40.0 50.0 — — 38.5 (1.52) 7.0 (.28) 43.5 (1.71) 7.0 (.28) 54.0 (2.13) 7.0 (.28) — — — — NPT3/8” NPT1/2” NPT3/4” 22.0 27.0 36.0 24.0 (.94) 5.0 (.20) 29.0(1.14) 6.0 (.24) 39.0(1.54) 7.0 (.28) 17.0 24.0 30.0 — — — 3.0 (.19) 3.0 (.19) 3.5 (.14) — — — — — — — — — — — — 54 Polyamide (PA) Brass, Ni Plated (BN) C C Stainless Steel (SS) EMI / RFI Brass, Ni Plated (BN) C — — — Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 — — —