9984-5000

PREVIOUS DC - 3WIRE EXTENDED RANGE PLUS Brass, Nickel Plated (BN), Cylindrical,Threaded, 10-30V DC, 200mA 1 LED for Output Energized HOME NEXT • Up to 3 times the sensing distance • Ideal for applications where large sensors will not fit • Carries mark FIND IT • IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Protection • Sensing ranges from 3mm (.12 in.) to 40mm (1.57 in.) • Short Circuit Protection • Overload Protection • Reverse Polarity Protection • Wire Break Resistance • Temperature Range: -25 to 70°C (-13 to 158°F) M18 Flush Mount Sensing Distance Cable or Connector Style Cat. No. PNP NPN M18 Non-Flush Mount 12mm (0.4 in.) Normally Open 20mm (0.8 in.) Cable 65 Cable 65 9984-5000 9984-5065 9984-5200 9984-5265 Normally Closed Normally Open Normally Closed Ripple Voltage ≤20% ≤20% ≤20% ≤20% Voltage Range 10V-30V 10V - 30V 10V - 30V 10V - 30V Supply Current ≤20 mA ≤20 mA ≤20 mA ≤20 mA Max. Load Current 200 mA 200 mA 200 mA 200 mA ≤2.4V ≤2.4V ≤2.4V ≤2.4V Max. Leakage Currrent ≤100 µA ≤100 µA ≤100 µA ≤100 µA Switching Frequency 500 Hz 500 Hz 200 Hz 200 Hz Hysterisis ≤10% ≤10% ≤10% ≤10% Temperature Drift ≤10% ≤10% ≤10% Housing Material Nickel Plated Brass Voltage Drop Across Sensor Repeatability Nickel Plated Brass 0.6mm (.02 in.) 0.6mm (.02 in.) M x 60 40 4 50 0 10 1 1 x M x x x 1 1 6 74 0 40 12 x 64 M 4 50 0 10 1 1 LED 18 18 12 ©Altech 18 18 M 48 1mm (.04 in.) LED M LED 65 Style Connectors 4-pin, Micro style, 12mm (.47 in.) supplied with Brass, Nickel Plated (BN) locknuts. Nickel Plated Brass 1mm (.04 in.) M LED Fixed Cable PVC 2m (6 ft. 6 in.). Supplied with Brass, Nickel Plated (BN) locknuts. ≤10% Nickel Plated Brass Corp. • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 PREVIOUS HOME NEXT Accessories Metric/in. Conversion Table 1.0 mm 4.0 mm 6.0 mm 8.0 mm 12.0 mm 40.0 mm 44.0 mm 45.0 mm 50.0 mm = = = = = = = = = 52.0 mm 54.0 mm 56.0 mm 58.0 mm 60.0 mm 62.0mm 66.0 mm 70.0 mm .04 in. .16 in .23 in. .31 in. .47 in. 1.57 in. 1.73 in. 1.77 in. 1.97 in. FIND IT = = = = = = = = 2 meter (6 ft. 6 in.) DC Cable Assemblies for Quick Disconnect Sensors 2.04 in. 2.12 in. 2.20 in. 2.28 in. 2.36 in. 2.44 in. 2.60 in. 2.75 in. This table converts millimeters to inches in reference to the illustrations included on these pages M30 Flush Mount M30 Non-Flush Mount 22mm (0.9 in.) 40mm (1.57 in.) Cable 65 Cable 65 9986-5000 9986-5065 9986-5200 9986-5265 65 Connector 65 Connector 65 Connector 65 Connector 8000-5110 8000-5120 8000-5150 8000-5160 PVC, Straight PVC, Right Angle PVC, Right Angle, 2LED NPN PVC, Right Angle, 2LED PNP Change last digit of connector number to 5 for 5 meter cable Refer to pages 116-121 for more cable information Mounting Brackets – see Pages 114-115 Flush Installation Non-Flush Installation ≤20% ≤20% ≤20% 10V - 30V 10V - 30V 10V - 30V ≤20 mA ≤20 mA ≤20 mA ≤20 mA 200 mA 200 mA 200 mA 200 mA ≤2.4V ≤2.4V ≤2.4V ≤2.04V 100 µA 100 µA 100µA 100µA 300 Hz 300 Hz 100 Hz 100 Hz ≤10% ≤10% ≤10% ≤15% ≤10% ≤10% ≤10% Nickel Plated Brass 1.1mm (.045 in.) Nickel Plated Brass d ≥d d ≥2d Metal Material General Mounting – You must maintain minimum distance between adjacent and opposite sensors in addition to non-target metals as specified in the drawings above. Flush mount sensors must extend at least 0.2 times the sensor diameter above the adjacent metal housing. Non-flush mount sensors must extend a distance greater than the sensing distance (Sn). Please contact Altech for any installation assistance ≤10% Nickel Plated Brass 1.1mm (.045 in.) ≥0.2d d ≥Sn ≤20% 10V - 30V ≥3 x Sn ≥2d Nickel Plated Brass 2mm (.078 in.) 2mm (.078 in.) Note: Sensor dimensions in mm. Wiring Diagrams Note: Wire colors are applicable to cable purchased from Altech M PNP x 30 30 M 1. x 5 1. LED 5 LED Fixed Cable BR + 70 Normally Open M M 30 30 x x 5 1. 1. LED LOAD • – BL 50 5 60 0 10 BK 5 LED 65 Connector BR + 1 4 BK 3 • BL – Normally Open 84 1 70 50 x 1 74 12 x ©Altech M 12 5 60 0 M 10 LOAD 2 Corp. • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 49