BRS5

Altech UL1077 Altech UL1077/508 Busbar System UL508 listed E205412 UL1077/508 Listed Busbars The Altech Busbar System is an innovative way to jumper up to 57 poles of Manual Motor Controllers (MMC) and Supplementary Protectors (SP). The advantages of this busbar system are: • • • • 30% Installation time savings Panel space savings Reduced maintenance High electrical ratings Universal UL1077/508 Busbar fits most Supplementary Protectors and Manual Motor Controllers in the market! Altech UL508 UL1077/508 Busbar System 4 Please contact Altech for details and further information. • 1-57 different pin configurations • 1/2 pole spacing (auxiliary switch) available • Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) • UL recognized and listed for Altech’s R-Series, V-EA Series and MA Series of Manual Motor Controllers and Supplementary Protectors • UL recognized and listed for use with most popular UL1077 supplementary protectors and UL508 Manual Motor Controllers in the market. • Customers can cut the Busbar without losing the UL approval • Line/Load reversible Technical Specifications Material of Busbar Material of Insulation (Housing) Electrical Ratings Short Circuit Withstand Rating Applying Standards Busbars UL1077/ 508 Copper Polyamid 18mm2: 80A/480VAC 25mm2: 100A/480VAC 10kA UL508, VDE0660 Part 100 and 502, VDE 0606, VDE 0659 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL1077/508 Busbar System Altech UL1077 Power Feed Methods 80A/100A per phase 1) Start/ End Feed Method 1 2 3 (P50UT) P50UT* / P50UB* With the P50UT Power Feed Lug or the P50UB Modular Direct Power Feed as a Start/End Feeding Device a maximum input current of 80A/100A per Phase can be achieved. 80A with 18mm² Busbar and 100A with 25mm² Busbar. 80A/100A 80A/100A 80A/100A 1 2 3 80A/100A per phase 80A/100A 80A/100A 80A/100A (P50UB) 115A per phase 1 2) Center/ Middle Feed Method 3 35A/15A 35A/15A 35A/15A 35A/15A 35A/15A 80A/100A 80A/100A 80A/100A 35A/15A 80A/100A 80A/100A 80A/100A 1 2 3 115A per phase P95UB* 80/100A 80/100A 80/100A (P50UB) 80/100A 80/100A 80/100A With the P95UB Power Feed Block as a Center/Middle Feeding Device a maximum input current of 160A/200A per Phase can be achieved (160A with 18mm² Busbar and 200A with 25mm² Busbar). Note: The Power Feed Block can only be used with a standard spacing 3 Phase UL1077/508 Busbar. (P95UB) 1 2 3 Altech UL508 (P50UT) P50UT* / P50UB* With the P50UT Power Feed Lug or the P50UB Modular Direct Power Feed as a Center/Middle Feeding Device a maximum input current of 115A per Phase can be achieved. (18mm²: 80A + 35A; 25mm²: 100A + 15A) 2 160A/200A per phase * For complete specifications and description of Feeding Devices see page 12-13. Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 5 1 PHASE BUSBAR - standard spacing 18mm2 for 80A Altech UL508 UL508 listed E205412 15 mm (0.59 in.) 1007 mm (39.65 in.) Type/ Cat. No. 1P18U1/2 1P18U1/3 1P18U1/4 1P18U1/5 1P18U1/6 1P18U1/7 1P18U1/8 1P18U1/9 1P18U1/10 1P18U1/11 1P18U1/12 1P18U1/13 1P18U1/14 1P18U1/15 1P18U1/16 1P18U1/17 1P18U1/18 1P18U1/19 1P18U1/20 1P18U1/21 1P18U1/22 1P18U1/23 1P18U1/24 1P18U1/25 1P18U1/26 1P18U1/27 1P18U1/28 1P18U1/29 ACCESSoRIES Type/Cat. No: Description: 6 2 mm (0.79 in.) 15 mm (0.59 in.) Altech UL1077 3.5 mm (0.14 in.) 56 x 17.8 = 996.8 mm (39.24 in.) 17.8 mm (0.70 in.) 18mm2 for 80A No. of Pins No. of MMC to Jumper Length [mm] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 2x1 pole 3x1 pole 4x1 pole 5x1 pole 6x1 pole 7x1 pole 8x1 pole 9x1 pole 10x1 pole 11x1 pole 12x1 pole 13x1 pole 14x1 pole 15x1 pole 16x1 pole 17x1 pole 18x1 pole 19x1 pole 20x1 pole 21x1 pole 22x1 pole 23x1 pole 24x1 pole 25x1 pole 26x1 pole 27x1 pole 28x1 pole 29x1 pole 32.5 50.3 68.0 85.8 103.5 121.3 139.0 156.8 174.5 192.3 210.0 227.8 245.5 263.3 281.0 298.8 316.5 334.3 352.0 369.8 387.5 405.3 423.0 440.8 458.5 476.3 494.0 511.8 P50UT Power Feed Lug Type/ Cat. No. 1P18U1/30 1P18U1/31 1P18U1/32 1P18U1/33 1P18U1/34 1P18U1/35 1P18U1/36 1P18U1/37 1P18U1/38 1P18U1/39 1P18U1/40 1P18U1/41 1P18U1/42 1P18U1/43 1P18U1/44 1P18U1/45 1P18U1/46 1P18U1/47 1P18U1/48 1P18U1/49 1P18U1/50 1P18U1/51 1P18U1/52 1P18U1/53 1P18U1/54 1P18U1/55 1P18U1/56 1P18U1/57 18mm2 for 80A No. of Pins 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 P50UB Modular Direct Power Feed Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com No. of MMC to Jumper 30x1 31x1 32x1 33x1 34x1 35x1 36x1 37x1 38x1 39x1 40x1 41x1 42x1 43x1 44x1 45x1 46x1 47x1 48x1 49x1 50x1 51x1 52x1 53x1 54x1 55x1 56x1 57x1 pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole BRS5 Insulation Cap Length [mm] 529.5 547.3 565.0 582.8 600.5 618.3 636.0 653.8 671.5 689.3 707.0 724.8 742.5 760.3 778.0 795.8 813.5 831.3 849.0 866.8 884.5 902.3 920.0 937.8 955.5 973.3 991.0 1008.8 1 PHASE BUSBAR - 1/2 pole spacing 18mm2 for 80A 36 x 27 = 972 mm (38.27 in.) 27 mm (1.06 in.) 15 mm (0.59 in.) 15 mm (0.59 in.) UL508 listed E205412 982 mm (38.66 in.) 1P18U1H/2 1P18U1H/3 1P18U1H/4 1P18U1H/5 1P18U1H/6 1P18U1H/7 1P18U1H/8 1P18U1H/9 1P18U1H/10 1P18U1H/11 1P18U1H/12 1P18U1H/13 1P18U1H/14 1P18U1H/15 1P18U1H/16 1P18U1H/17 1P18U1H/18 1P18U1H/19 No. of Pins No. of MMC to Jumper Length [mm] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2x1 pole 3x1 pole 4x1 pole 5x1 pole 6x1 pole 7x1 pole 8x1 pole 9x1 pole 10x1 pole 11x1 pole 12x1 pole 13x1 pole 14x1 pole 15x1 pole 16x1 pole 17x1 pole 18x1 pole 19x1 pole 39.0 66.0 93.0 120.0 147.0 174.0 201.0 228.0 255.0 282.0 309.0 336.0 363.0 390.0 417.0 444.0 471.0 498.0 Type/ Cat. No. 1P18U1H/20 1P18U1H/21 1P18U1H/22 1P18U1H/23 1P18U1H/24 1P18U1H/25 1P18U1H/26 1P18U1H/27 1P18U1H/28 1P18U1H/29 1P18U1H/30 1P18U1H/31 1P18U1H/32 1P18U1H/33 1P18U1H/34 1P18U1H/35 1P18U1H/36 18mm2 for 80A No. of Pins No. of MMC to Jumper 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 20x1 21x1 22x1 23x1 24x1 25x1 26x1 27x1 28x1 29x1 30x1 31x1 32x1 33x1 34x1 35x1 36x1 pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole ACCESSoRIES Type/Cat. No: Description: Length [mm] 525.0 552.0 579.0 606.0 633.0 660.0 687.0 714.0 741.0 768.0 795.0 822.0 849.0 876.0 903.0 930.0 957.0 Altech UL508 Type/ Cat. No. 18mm2 for 80A Altech UL1077 2 mm (0.79 in.) 4mm (0.16 in.) P50UT Power Feed Lug P50UB Modular Direct Power Feed Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com BRS5 Insulation Cap 7 2 PHASE BUSBAR - standard spacing Altech UL508 37 mm (1.46 in.) 2 mm (.079 in.) L2 L1 Copper strips Insulation Track End Cap End Cap 21 mm (0.83 in.) L2 L1 Type/ Cat. No. 2P18U3/4 2P18U3/6 2P18U3/8 2P18U3/10 2P18U3/12 2P18U3/14 2P18U3/16 2P18U3/18 2P18U3/20 2P18U3/22 2P18U3/24 2P18U3/26 2P18U3/28 2P18U3/30 2P18U3/32 2P18U3/34 2P18U3/36 2P18U3/38 2P18U3/40 2P18U3/42 2P18U3/44 2P18U3/46 2P18U3/48 2P18U3/50 2P18U3/52 2P18U3/54 2P18U3/56 ACCESSoRIES Type/Cat. No: Description: 8 55 x 17.75 = 976 mm (38.43 in.) 17.75 mm (0.70 in.) 7 mm (0.28 in.) UL508 listed E205412 13 mm (.51 in.) Altech UL1077 18mm2 for 80A / 25mm2 for 100A 18mm2 for 80A 991 mm (39.02 in.) No. of Pins No. of MMC to Jumper Length [mm] 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 pole 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x2 pole 66.3 101.8 137.3 172.8 208.3 243.8 279.3 314.8 350.3 385.8 421.3 456.8 492.3 527.8 563.3 598.8 634.3 669.8 705.3 740.8 776.3 811.8 847.3 882.8 918.3 953.8 989.3 P50UT Power Feed Lug Type/ Cat. No. 2P25U3/4 2P25U3/6 2P25U3/8 2P25U3/10 2P25U3/12 2P25U3/14 2P25U3/16 2P25U3/18 2P25U3/20 2P25U3/22 2P25U3/24 2P25U3/26 2P25U3/28 2P25U3/30 2P25U3/32 2P25U3/34 2P25U3/36 2P25U3/38 2P25U3/40 2P25U3/42 2P25U3/44 2P25U3/46 2P25U3/48 2P25U3/50 2P25U3/52 2P25U3/54 2P25U3/56 P50UB Modular Direct Power Feed 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 pole 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x2 pole 66.3 101.8 137.3 172.8 208.3 243.8 279.3 314.8 350.3 385.8 421.3 456.8 492.3 527.8 563.3 598.8 634.3 669.8 705.3 740.8 776.3 811.8 847.3 882.8 918.3 953.8 989.3 BRS5 Insulation Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 18/25CAP3P End Cap 2 PHASE BUSBAR - 1/2 pole spacing 37 mm (1.46 in.) 2 mm (.079 in.) 21 mm (0.83 in.) 1009 mm (39.72 in.) No. of Pins No. of MMC to Jumper 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 poles 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x1 pole 2P18U3H/4 2P18U3H/6 2P18U3H/8 2P18U3H/10 2P18U3H/12 2P18U3H/14 2P18U3H/16 2P18U3H/18 2P18U3H/20 2P18U3H/22 2P18U3H/24 2P18U3H/26 2P18U3H/28 2P18U3H/30 2P18U3H/32 2P18U3H/34 2P18U3H/36 2P18U3H/38 2P18U3H/40 2P18U3H/42 2P18U3H/44 2P18U3H/46 2P18U3H/48 2P18U3H/50 2P18U3H/52 2P18U3H/54 2P18U3H/56 ACCESSoRIES Type/Cat. No: Description: P50UT Power Feed Lug Length [mm] 75.3 119.8 164.3 208.8 253.3 297.8 342.3 386.8 431.3 475.8 520.3 564.8 609.3 653.8 698.3 742.8 787.3 831.8 876.3 920.8 965.3 1009.8 1054.3 1098.8 1143.3 1187.8 1232.3 Type/ Cat. No. 2P25U3H/4 2P25U3H/6 2P25U3H/8 2P25U3H/10 2P25U3H/12 2P25U3H/14 2P25U3H/16 2P25U3H/18 2P25U3H/20 2P25U3H/22 2P25U3H/24 2P25U3H/26 2P25U3H/28 2P25U3H/30 2P25U3H/32 2P25U3H/34 2P25U3H/36 2P25U3H/38 2P25U3H/40 2P25U3H/42 2P25U3H/44 2P25U3H/46 2P25U3H/48 2P25U3H/50 2P25U3H/52 2P25U3H/54 2P25U3H/56 P50UB Modular Direct Power Feed 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2x2 pole 3x2 pole 4x2 pole 5x2 pole 6x2 pole 7x2 pole 8x2 pole 9x2 pole 10x2 pole 11x2 pole 12x2 pole 13x2 pole 14x2 pole 15x2 pole 16x2 pole 17x2 pole 18x2 pole 19x2 pole 20x2 pole 21x2 pole 22x2 pole 23x2 pole 24x2 pole 25x2 pole 26x2 pole 27x2 pole 28x2 pole 75.3 119.8 164.3 208.8 253.3 297.8 342.3 386.8 431.3 475.8 520.3 564.8 609.3 653.8 698.3 742.8 787.3 831.8 876.3 920.8 965.3 1009.8 1054.3 1098.8 1143.3 1187.8 1232.3 BRS5 Insulation Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL508 Type/ Cat. No. 18mm2 for 80A Altech UL1077 22 x 44.5 = 979 mm (38.54 in.) 44.5 mm (1.75 in.) 17.8 mm (0.70 in.) 7 mm (0.28 in.) UL508 listed E205412 13 mm (.51 in.) 18mm2 for 80A / 25mm2 for 100A 18/25CAP3P End Cap 9 3 PHASE BUSBAR - standard spacing Altech UL508 2 mm (.079 in.) L3 L2 L1 Copper strips Insulation Track End Cap 21 mm End Cap (0.83 in.) L3 L2 L1 1009 mm (39.72 in.) Type/ Cat. No. 3P18U3/6 3P18U3/9 3P18U3/12 3P18U3/15 3P18U3/18 3P18U3/21 3P18U3/24 3P18U3/27 3P18U3/30 3P18U3/33 3P18U3/36 3P18U3/39 3P18U3/42 3P18U3/45 3P18U3/48 3P18U3/51 3P18U3/54 3P18U3/57 18mm2 for 80A No. of Pins No. of MMC to Jumper Length [mm] Type/ Cat. No. 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 101.8 155.0 208.3 261.5 314.8 368.0 421.3 474.5 527.8 581.0 634.3 687.5 740.8 794.0 847.3 900.5 953.8 1007.0 3P25U3/6 3P25U3/9 3P25U3/12 3P25U3/15 3P25U3/18 3P25U3/21 3P25U3/24 3P25U3/27 3P25U3/30 3P25U3/33 3P25U3/36 3P25U3/39 3P25U3/42 3P25U3/45 3P25U3/48 3P25U3/51 3P25U3/54 3P25U3/57 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 101.8 155.0 208.3 261.5 314.8 368.0 421.3 474.5 527.8 581.0 634.3 687.5 740.8 794.0 847.3 900.5 953.8 1007.0 ACCESSoRIES Type/Cat. No: Description: Type/Cat. No: Description: 10 7 mm (0.28 in.) 56 x 17.75 = 994 mm (39.13 in.) 17.75 mm (0.70 in.) 37 mm (1.46 in.) UL508 listed E205412 13 mm (.51 in.) Altech UL1077 18mm2 for 80A / 25mm2 for 100A P50UT Power Feed Lug P50UB Modular Direct Power Feed BRS5 Insulation Cap 18/25CAP3P End Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com P95UB Power Feed Block 3 PHASE BUSBAR - 1/2 pole spacing 15 x 62.3 = 934.5 mm 62.3 mm (2.45 in.) 2 mm (.079 in.) 21 mm (0.83 in.) 982 mm (38.66 in.) Type/ Cat. No. 18mm2 for 80A No. of Pins No. of MMC to Jumper Length [mm] Type/ Cat. No. 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 110.8 173.1 235.4 297.7 360.0 422.3 484.6 546.9 609.2 671.5 733.8 796.1 858.4 920.7 983.0 1045.3 1107.6 1169.9 3P25U3H/6 3P25U3H/9 3P25U3H/12 3P25U3H/15 3P25U3H/18 3P25U3H/21 3P25U3H/24 3P25U3H/27 3P25U3H/30 3P25U3H/33 3P25U3H/36 3P25U3H/39 3P25U3H/42 3P25U3H/45 3P25U3H/48 3P25U3H/51 3P25U3H/54 3P25U3H/57 3P18U3H/6 3P18U3H/9 3P18U3H/12 3P18U3H/15 3P18U3H/18 3P18U3H/21 3P18U3H/24 3P18U3H/27 3P18U3H/30 3P18U3H/33 3P18U3H/36 3P18U3H/39 3P18U3H/42 3P18U3H/45 3P18U3H/48 3P18U3H/51 3P18U3H/54 3P18U3H/57 25mm2 for 100A No. of Pins No. of MMC to Jumper Length [mm] 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 2x3 pole 3x3 pole 4x3 pole 5x3 pole 6x3 pole 7x3 pole 8x3 pole 9x3 pole 10x3 pole 11x3 pole 12x3 pole 13x3 pole 14x3 pole 15x3 pole 16x3 pole 17x3 pole 18x3 pole 19x3 pole 110.8 173.1 235.4 297.7 360.0 422.3 484.6 546.9 609.2 671.5 733.8 796.1 858.4 920.7 983.0 1045.3 1107.6 1169.9 ACCESSoRIES Type/Cat. No: Description: P50UT Power Feed Lug P50UB Modular Direct Power Feed Type/Cat. No: Description: BRS5 Insulation Cap 18/25CAP3P End Cap Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Altech UL508 7 mm (0.28) 17.8 mm (0.70 in.) 37 mm (1.46 in.) UL508 listed E205412 Altech UL1077 13 mm (.51 in.) 18mm2 for 80A / 25mm2 for 100A 11 Power Feed Devices Altech UL1077 Easy connection of power supply wires to the busbar/MCB. Power Feed Devices ensure permanent connection. Type/Cat. No. Electrical Ratings Terminal Site Acceptability Recommended/ Required Torque Material of Lug/ Terminal Insulation Material For use with Power Feed Lug Modular Direct Power Feed UL508 listed E205412 UL508 listed E205412 P50UT 115A/480VAC 10-1/0 AWG (1.5-50mm2) P50UB 115A/480VAC 14-1 AWG (1.5-50mm2) 5.6Nm (50lb. in.) Brass Polyamid UL1077/508 18 and 25mm2 1-3 phase busbars 4Nm (35.4 lb. in.) Brass Polyamid UL1077/508 18 and 25mm2 1-3 phase busbars Dimensions 11 mm (0.43 in.) 59 mm (2.32 in.) 28.5 mm (1.12 in.) 21 mm (0.83 in.) 16 mm (0.63 in.) 3 mm (0.12 in.) Altech UL508 6.8 mm (0.27 in.) Assembly Instructions The power feed lugs (Cat. # P50UT) fit together with the lugs of the busbar in the terminals of the MCB/MA. 12 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com Power Feed Block End Caps UL508 listed E205412 Type/Cat. No. Electrical Ratings Terminal Site Acceptability Recommended/ Required Torque Material of Lug/ Terminal Insulation Material For use with P95UB 200A/ 480VAC 1-4/0 AWG (50-120mm2) 19.5Nm (175lb. in.) Brass Polyamid UL1077/508 18 and 25mm2 3 phase busbars (standard spacing only) Type/Cat. No: For use with: 18/25CAP3P 18/25mm2 2&3 phase Busbar Insulation Caps Dimensions Altech UL1077 Miscellaneous Accessories 43.5 mm (1.71 in.) DIN Rail Clip 31.6 mm (1.24 in.) 35.6 mm B (1.40 in.) A BRS5 (5 per strip) 18/25mm2 1-3 phase Busbar 63 mm (2.48 in.) 63 mm (2.48 in.) 35.6 mm (1.40 in.) Type/Cat. No: For use with: 31.6 mm (1.24 in.) B Assembly Instructions NOTE: The Power Feed Block uses the space of 5 Pins of the standard spacing Busbar (see drawing below). Phase 1 connects to Pin 1, Phase 2 to Pin 3 and Phase 3 to Pin 5. Pin 2 and 4 are not in use. Pin 6 should be covered with an insulation cap if phase sequence stays the same. Therefore, the Power Feed Block covers 6 pins to connect to the three phases. 1 1 2 2 3 3 1 4 Phase 1 Altech Corp.® • t 908-806-9400 • f 908-806-9490 • www.altechcorp.com 2 5 3 6 Phase Pin Phase 2 Phase 3 Altech UL508 88.5 mm (3.48 in.) A 13