CA728/10

2 Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff of engineering, manufacturing and sales personnel to provide the highest quality products with superior service. This is the Altech Commitment! With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure that we solve your problem the first time! Altech’s Commitment Altech’s Automation and Control components meet applicable national and international standards, such as UL, NEC, CSA, IEC and VDE. Altech provides these products with superior customer service and delivery through a ISO 9001 Quality Management system, which stresses continuous process improvement. We perform these services with honesty and integrity. All Altech employees are trained in this Quality Management System and are dedicated to achieve these goals. Altech’s quality system has been ISO approved since 1999. TABLE OF CONTENTS Screw Clamp Terminal Blocks Introduction ............................................................4 Selection Guide......................................................5 Feed Through Terminal Blocks • Single Level......................................................6-8 • Multi Connection..................................................9 • Double Level ................................................10-13 • Triple Level...................................................14-15 • Ground/ Earth...............................................16-17 Fuse Terminal Blocks • 5x20mm/ 5x25mm Fuse...............................18-19 • Double Level Fuse Terminal.........................20-21 • 6.35x25.4mm (¼” x 1”) Fuse .............................22 • Component Carrier............................................23 • Fuse Holder..................................................24-25 Disconnect & Test Terminal Blocks • Slider Style .............................................26-27, 30 • Blade Style ...................................................28-29 • Lever Style ........................................................31 Power Distribution Terminal Blocks • Multi I/O........................................................32-34 • Hybrid Spring/ Screw.........................................35 • Distribution / Grounding System........................36 Special Application Terminal Blocks • 1000V High Voltage...........................................37 • Thermocouple ...................................................38 • Tab Connection .................................................39 • Spring Loaded..............................................40-41 • Electronic Components ................................42-47 Accessories Screw Terminal Blocks .............48-49 Stud/ Ring Lug Terminal Blocks Introduction ..........................................................50 Selection Guide....................................................51 • Ring Lug Barrier Terminal Blocks .................52-53 • Ring Lug Stud Terminal Blocks ....................54-55 • Ring Lug Hinge Terminal Blocks ..................56-57 • Ring Lug Power Terminal Blocks..................58-59 • High Current Power Terminal Blocks.................60 • Accessories Stud/ Ring Lug Terminal Blocks ...61 DIN RAIL TERMINAL BLOCKS Spring Clamp Terminal Blocks Introduction ..........................................................62 Selection Guide....................................................63 CX Series • Single Level Feed Through ..........................64-65 • Multi Connection ..........................................65-67 • Ground/ Earth...............................................68-70 • Double Level .....................................................71 • Electronic Component..................................72-73 • 5x20mm/ 5x25mm Fuse....................................74 • Component Carrier............................................75 • Disconnect.........................................................76 • Side Entry..........................................................77 • Pluggable ..........................................................78 • Hybrid Distribution .............................................79 Angular Terminal Blocks • Feed-Through....................................................80 • Multi-Connection ...............................................81 • Multi-Level....................................................82-83 • Ground/ Earth...............................................84-85 Accessories Spring Terminal Blocks ............86-87 Mini/ Panel Mount Terminal Blocks Introduction/ Selection Guide .............................88 Screw Clamp Terminal Blocks • 15mm Mini Rail..................................................89 • Panel Mount ......................................................90 Spring Clamp Terminal Blocks • 15mm Mini Rail..................................................91 • Panel/ DIN Rail Mount.......................................92 • Micro Panel Mount ............................................93 High Temperature Ceramic ................................94 Terminal Strips – Eurostrip® Style Introduction/ Selection Guide .............................95 • 300V Flat Base, Feed Through ....................96-97 • 600V Standoff Feet, Feed Through..............98-99 • Pluggable .................................................100-101 • Middle Barrier, Feed Through ..................102-103 • Accessories Terminal Strips .....................104-105 Mounting & Marking – Accessories • DIN Rail....................................................106-107 • Support Brackets/ Mounting Clips ...................108 • End Stops........................................................109 • Group Identification Markers............................110 • Marking Tags/ Warning Labels.........................111 • Plotter & Marking System .........................112-113 Ferrules Introduction .................................................114-115 • UL Ferrules ...............................................116-117 • Crimping Tools (UL Ferrules)....................118-120 • DIN Standard Ferrules .............................120-124 • Crimping Tools (DIN Ferrules)..................125-127 INDEX...........................................................128-133 TERMS & CONDITIONS .....................................134 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 3 OVERVIEW INTRODUCTION SCREW TERMINAL BLOCKS SCREW CLAMP CONNECTION TECHNOLOGY • Maximum wiring efficiency and reliability • Supplied with open clamps ready to accept wires • No wire preparation necessary (with/ without ferrule) • Vibration resistant/ Gas-tight connection • For very larger wire sizes (up to 250 kcmil) • Designed for most stringent requirements • Simple connection with standard flat head screwdriver E220514 60947-7-1 MATERIAL SPECIFICATIONS Housing Screw Current Bar Terminal Clamp Current Carrying Metal Corrosion free material Terminal Block Housing • Polyamide PA66 Housing • Self-extinguishing • High mechanical strength • Clamp: zinc chromate passivated steel • Screw: zinc chromate passivated steel • Current Bar: nickel plated copper alloy / tin plated copper Polyamide 66 Specifications Upper Temperature Limit: 105°C Lower Temperature Limit: -50°C Flammability UL94: V2/ V0 Volume Resistivity: 1012 Ω cm Surface Resistivity: 1010 Ω INSTALLATION GUIDELINES 1 2 Secure Connection 3 1 Insert Wire into open clamp 2 Tighten screw to specified torque 3 Remove Screwdriver, screw terminal is closed with locking feature for a reliable/ safe connection SCREW CLAMP ACCESSORIES AND FEATURES Internal Jumper Isolated Internal Jumper Separator Plate Shorting Screw Current Bar Shorting Sleeve End Plate Isolation Partition DIN Rail External Jumper End Stop 4 Marking Tags Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 OVERVIEW SELECTION GUIDE SCREW TERMINAL BLOCKS Feed Through Terminal Blocks • • • • • • • Up to 240A Multi-Connection Terminals Double Level Terminal Triple Level Terminals Ground Blocks Wide range of accessories All standard colors Feed Through Multi-Connection Double Level Triple Level Ground / Earth page 6-8 page 9 page 10-12 page 14-15 page 16-17 5x20mm / 5x25mm CF4U / CF4SP Double Lever DDFL4U 1/4”x1” CAFL4U Component Carrier CCC4U Fuse Holder page 18-19 page 20-21 page 22 page 23 page 24-25 Slider Style CDS6U Blade Style CKT4U Blade Style CKT4SP Slider Style CDTTU Lever Style CSDL4U page 26-27 page 28 page 29 page 30 page 31 Fuse Terminal Blocks • • • • • 1/4" x 1" Fuse Terminal Blocks 5x20mm/ 5x25mm Fuse Terminal Blocks Double level versions Component Carrier for flexible requirements 10x38, CC, J-Type Fuse Holder Disconnect & Test Terminal Blocks • • • • Slider Style Blade/ Knife Style Lever Style Accessories and matching Feed Through terminals Power Distribution Terminal Blocks • Various I/O configurations • Up to 150A • Compact Hybrid Distribution Block CDB Series CMDB Series Hybrid CXDB Series Distribution/Grounding page 32-33 page 34 page 35 page 36 Special Application Terminal Blocks • Spring Loaded Terminals for high vibration applications • 1000V High Voltage Terminals • Thermocouple Terminals • Tab Connection Terminals • Electronic Components Terminals 1000V High Voltage CHV Series Thermocouple CTT2.5U Series Tab Connection CTC Series Spring Loaded USC Series Electronic Components page 37 page 38 page 39 page 36-37 page 42-47 Accessories • • • • • Internal Jumpers (Uninsulated, Insulated) Endplates Partition/ Separator Plates Protective Covers End Stops Jumpers Endplates, Separators, End Stops, Covers, etc. page 48 page 49 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 5 FEED-THROUGH SINGLE LEVEL TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS2.5U-N CTS4U-N CTS6U HIGHLIGHTS FEATURES • Altech CTS Series of Universal Screw Terminal Blocks featuring global standards • Universal mounting foot for easy snap onto common DIN rail profiles • Screw-type jumper system • Current Ratings up to 240A APPLICATIONS • Ex & IECEx approvals for use in potentially explosive areas • Control, Automation applications Dimensions & Weight Width 5 mm 6 mm 8 mm Length 43 mm 43 mm 43 mm 46.2 mm 53.7 mm 46.2 mm 53.7 mm 47.8 mm 55.5 mm 6.2 g 7.6 g 13.5 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-8 AWG 0.5-6 mm2 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Voltage Rating Current Rating 25 A 24 A 35 A 32 A 50 A 41 A Torque 7 lb-in 0.4 Nm 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm Polyamide 66 Polyamide 66 Polyamide 66 8 mm 8 mm 9 mm Flat Head 0.5 x 3.0 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4.0 mm Installation Instructions Wire Stripping Length Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Mounting Handle Mounting handle is used for mounting 10 terminal blocks on a DIN rail, thus saving considerable time. Specially designed pins in the mounting handle grip the terminal blocks when pressed against entry. Cat. No. Terminal Block Std. Pk. 6 60947-7-1 E220514 0.2-2.5 mm2 Screwdriver MH2.5 CTS2.5U-N 1 MH4 1 CTS4U-N 60947-7-1 E220514 22-12 AWG Insulation Material • Power Distribution 60947-7-1 E220514 AEx ell Ex ell U CTS2.5U-N CTS2.5U-N/R CTS2.5U-N/BU CTS2.5U-N/BL CTS2.5U-N/O CTS2.5U-N/G CTS2.5U-N/Y CTS2.5U-N/W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CTS4U-N CTS4U-N/R CTS4U-N/BU CTS4U-N/BL CTS4U-N/O CTS4U-N/G CTS4U-N/Y CTS4U-N/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CTS6U CTS6U/R CTS6U/BU CTS6U/BL CTS6U/O CTS6U/G CTS6U/Y CTS6U/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EP2.5/4UN 50 EP2.5/4UN 50 EP6/10U 50 Partition Plate PP2.5/4UN 50 PP2.5/4UN 50 PP6/10U 50 Separator Plate SP2.5/4UN 100 SP2.5/4UN 100 SP6/10U 100 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA721/2 CA721/3 CA721/4 CA721/10 CA721/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 50 10 10 CA723/2 CA723/3 CA723/4 CA723/10 – 100 50 50 10 – Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA741/2 CA741/3 CA741/4 CA741/10 CA741/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA743/2 CA743/3 CA743/4 CA743/10 – 100 50 50 10 – External Jumper 2 pole 3 pole 4 pole 10 pole CA717/2 CA717/3 CA717/4 CA717/10 100 100 100 20 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA710/2 CA710/3 CA710/4 CA710/10 100 50 50 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/05 100 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) FEED-THROUGH SINGLE LEVEL TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS10U CTS16U CTS25UN CTS35UN Dimensions & Weight Width 10 mm 12 mm 12 mm 16 mm Length 43 mm 43 mm 49 mm 50.5 mm 47.8 mm 55.5 mm 47.8 mm 55.5 mm 57.2 mm 64.7 mm 59.2 mm 66.7 mm 16.5 g 25.5 g 35.5 g 50.5 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 AEx ell Ex ell U Wire Size (solid / stranded) Voltage Rating 16-6 AWG 22-6 AWG 0.5-10 mm2 600 V Current Rating Torque 60947-7-1 E220514 600 V 1000V AC/DC 600 V 60947-7-1 E220514 20-4 AWG 22-6 AWG 0.2-16 mm2 60947-7-1 E220514 14-2 AWG 4-25 mm2 12-1/0 AWG 4-35 mm2 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 65 A 65 A 57 A 85 A 70 A 76 A 105 A 101 A 150 A 125 A 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 30 lb-in 2.0 Nm 50 lb-in 2.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 11 mm 12 mm 14 mm 15 mm Flat Head 0.8 x 4.0 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. CTS10U CTS10U/R CTS10U/BU CTS10U/BL CTS10U/O CTS10U/G CTS10U/Y CTS10U/W Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CTS16U CTS16U/R CTS16U/BU CTS16U/BL CTS16U/O CTS16U/G CTS16U/Y CTS16U/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CTS25UN CTS25UN/R CTS25UN/BU CTS25UN/BL CTS25UN/O CTS25UN/G CTS25UN/Y CTS25UN/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CTS35UN CTS35UN/R CTS35UN/BU CTS35UN/BL CTS35UN/O CTS35UN/G CTS35UN/Y CTS35UN/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. End Plate EP6/10U 50 – – – – – – Partition Plate PP6/10U 50 – – PP25UN 50 PP35UN 50 Separator Plate SP6/10U 100 SP6/10U 100 – – DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. – Std. Pk. – Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA724/2 CA724/3 CA724/4 CA724/10 – 100 50 50 10 – CA751/2 CA751/3 CA751/4 CA751/10 CA751/100 50 50 50 10 10 CA725/2 CA725/3 CA725/4 CA725/10 CA725/100 50 20 20 10 10 CA771/2 CA771/3 CA771/4 CA771/10 – 50 20 20 10 – Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA744/2 CA744/3 CA744/4 CA744/10 – 100 50 50 10 – CA761/2 CA761/3 CA761/4 CA761/10 CA761/100 100 50 50 10 10 CA745/2 CA745/3 CA745/4 CA745/10 CA745/100 50 20 20 10 10 CA781/2 CA781/3 CA781/4 CA781/10 – 50 20 20 10 – External Jumper 2 pole 3 pole 4 pole 10 pole CA718/2 CA718/3 CA718/4 CA718/10 100 50 50 20 – – – – – – – – – – – – – – – – – – – – – – – – Test Socket CA707/TS/05 100 CA707/TS/05 100 CA707/TS/06 100 CA707/TS/06 100 Marking Tag MT10 1 Pk. (100 tags) MT12 1 Pk. (100 tags) MT12 1 Pk. (100 tags) MT16 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) 7 FEED-THROUGH SINGLE LEVEL POWER TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS50/70N CTS50/70NA CTS95/120N HIGHLIGHTS FEATURES • DIN Rail and Panel • • • • mountable Voltage Rating 1000V Current Rating up to 240A Hex Screw version for easier tightening (NA) Auxiliary block for easy plug in APPLICATIONS • Power Distribution • Solar Applications • AUX6 auxiliary for Dimensions & Weight with Allen Screw Width 20.5 mm 20.5 mm 27.0 mm Length 77.3 mm 77.3 mm 84.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 71.1 mm 78.1 mm 71.1 mm 78.1 mm 83.0 mm 90.5 mm 93.8 g 95.0 g 177.2 g Weight per piece Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) indicator light or contactor with Allen Screw 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 8-2/0 AWG 10-70 mm2 8-2/0 AWG 10-70 mm2 2-250 KCMIL 25-120 mm2 Voltage Rating 1000 V 1000 V AC/DC 1000 V 1000 V AC/DC 1000 V 1000 V AC/DC Current Rating 175 A 192 A 175 A 192 A 240 A 269 A Torque 38 lb-in 3 .0 Nm 38 lb-in 3.0 Nm 90 lb-in 6.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Accessories 22 mm 24 mm Allen Wrench 5 mm Allen Wrench 6 mm Cat. No. CTS50/70N CTS50/70N/R CTS50/70N/BU CTS50/70N/BL CTS50/70N/O CTS50/70N/G CTS50/70N/Y CTS50/70N/W Cat. No. Std. Pk. 20 20 20 20 20 20 20 20 Std. Pk. Cat. No. Std. Pk. CTS50/70NA CTS50/70NA/R CTS50/70NA/BU CTS50/70NA/BL CTS50/70NA/O CTS50/70NA/G CTS50/70NA/Y CTS50/70NA/W Cat. No. 20 20 20 20 20 20 20 20 Std. Pk. Cat. No. Std. Pk. CTS95/120N CTS95/120N/R CTS95/120N/BU CTS95/120N/BL CTS95/120N/O CTS95/120N/G CTS95/120N/Y CTS95/120N/W Cat. No. 10 10 10 10 10 10 10 10 Std. Pk. DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Shorting Link System CA628/2 CA628/3 10 10 CA628/2 CA628/3 10 10 CA629/2 CA629/3 10 10 Marking Tag MT16 Cat. No AUX6 Auxiliary Terminal Block Used for: CTS50/70N CTS50/70NA CTS95/120N In certain power circuits, there is a need to take an extra connection for an Auxiliary circuit like an indicating light or contactor. The AUX6 terminal easily plugs into the terminal and provides this extra connection point. 8 22 mm Flat Head 1.0x7.5 mm 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Ratings IEC60947-7-1 Voltage/Current: 1000 V / 41 A Torque: 0.8 Nm IEC 60079-7 Voltage/Current: 630 V / 36 A Torque: 0.8 Nm MT16 1 Pk. (100 tags) UL-1059 Voltage/Current: 600 V / 50 A Torque: 14 lb-in CSA22.2-158 Voltage/Current: 600 V / 50 A Torque: 14 lb-in Wire Range: 22-8 AWG Width x Length x Height: 8 x 53.6 x 29.4 mm Std. Pk.: 10 Marking Tag: MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 FEED-THROUGH FEED THROUGH MULTI-CONNECTION CMC1-2 SCREW TERMINAL BLOCKS CMC2-2 CMCG4 HIGHLIGHTS FEATURES • 3 to 4 connections • Up to 2 connection Dimensions & Weight Width 6 mm 6 mm 6 mm Length 46.5 mm 65.0 mm 65.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 49.5 mm 56.5 mm 53.4 mm 60.5 mm 53.7 mm 60.9 mm 11.0 g 16.0 g 21.6 g Weight per piece points on each side • 2 jumper channels on Technical Data/Ratings Approvals 60947-7-1 E220514 Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 630 V AC/DC 600 V 630 V AC/DC 600 V 1000 V AC/DC Current Rating 35 A 32 A 35 A 32 A - Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 4.5 lb-in Insulation Material Polyamide 66 Polyamide 66 0.5 Nm Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 9 mm 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CMC1-2 CMC1-2/R CMC1-2/BU CMC1-2/BL CMC1-2/O CMC1-2/G CMC1-2/Y CMC1-2/W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CMC2-2 CMC2-2/R CMC2-2/BU CMC2-2/BL CMC2-2/O CMC2-2/G CMC2-2/Y CMC2-2/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CMCG4 Yellow/Green Cat. No. Std. Pk. End Plate EPCMC1-2 50 EPCMC2-2 50 EPCMC2-2 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Std. Pk. Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 50 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 50 10 10 – – – – – – – – – – Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 – – – – – – – – – – External Jumper 2 pole 3 pole 4 pole 10 pole CA713/2 CA713/3 CA713/4 CA713/10 100 100 100 20 CA713/2 CA713/3 CA713/4 CA713/10 100 100 100 20 – – – – – – – – – – CA707/TS/01 Marking Tag MT6 CA707/TS/01 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 type of wires with different wire sizes into a single terminal block • Simple distribution applications 50 Std. Pk. Test Socket APPLICATIONS • Connecting different Std. Pk. Cat. No. Cat. No. CMC2-2 for individual potential distribution • CMCG4 same profile as regular feed-through version 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 9 DOUBLE LEVEL FEED THROUGH DOUBLE LEVEL SCREW TERMINAL BLOCKS CDL4UN CDL4UN(I.S) Width 6 mm 6 mm Length 57.0 mm 57.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 59.5 mm 67.2 mm 59.5 mm 67.2 mm 13.8 g 15.6 g HIGHLIGHTS FEATURES • Accommodates larger MT6 marking tags on both levels • Independent and internally shorted version • CDL4UN offers jumper channel on both levels • Same profile Ground versions • Grounding Level on Dimensions & Weight Weight per piece Technical Data/Ratings CDLG4 is identified by green/yellow imprint Approvals Wire Size (solid / stranded) applications 60947-7-1 E220514 22-10 AWG 0.2-4 mm 22-10 AWG 0.2-4 mm2 600 V 800 V AC/DC 600 V 800 V AC/DC Voltage Rating APPLICATIONS • High density writing 60947-7-1 E220514 2 Current Rating 35 A 32 A 35 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Polyamide 66 Polyamide 66 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Insulation Material Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. CDL4UN CDL4UN/R CDL4UN/BU CDL4UN/BL CDL4UN/O CDL4UN/G CDL4UN/Y CDL4UN/W Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. CDL4UN(I.S) CDL4UN(I.S)/R CDL4UN(I.S)/BU CDL4UN(I.S)/BL CDL4UN(I.S)/O CDL4UN(I.S)/G CDL4UN(I.S)/Y CDL4UN(I.S)/W 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4UN 50 EPCDL4UN 50 Separator Plate SPCDL4U 100 SPCDL4U 100 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Accessories 10 Std. Pk. Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 50 50 20 CA714/2 CA714/3 CA714/4 CA714/10 100 50 50 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 DOUBLE LEVEL FEED THROUGH DOUBLE LEVEL SCREW TERMINAL BLOCKS CDLG4(I.S) CDLG4 CDLG2.5 Width 6 mm 6 mm 6 mm Length 57.0 mm 57.0 mm 71.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 59.5 mm 67.2 mm 59.5 mm 67.2 mm 53.0 mm 61.0 mm 22.2 g 20.6 g 20.2 g Dimensions & Weight Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 24-10 AWG 0.2-4 mm 24-10 AWG 0.2-4 mm 24-12 AWG 0.2-2.5 mm2 150 V 500 V AC/DC 150 V 500 V AC/DC 300 V 500 V - - 32 A (upper level) 32 A 24 A 24 A 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 4.5 lb-in 0.4 Nm Voltage Rating Current Rating Torque Insulation Material 2 2 Polyamide 66 Polyamide 66 Polyamide 66 8 mm 8 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.5 x 3.0 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Cat. No. Std. Pk. Std. Pk. Cat. No. Std. Pk. 100 CDLG4 100 CDLG2.5 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4UN 50 EPCDL4UN 50 EPCDLG2.5 50 Separator Plate SPCDL4U 100 SPCDL4U 100 SPCDLG2.5 100 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 2511120 CA701-15/S 2511160 CA702 CA802 CA202 20 20 10 50 50 25 100 100 100 10 – Yellow/Green CDLG4(I.S) Accessories 100 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 50 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 50 10 10 CA627/2 CA627/3 CA627/4 CA627/10 – Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 – – – – – External Jumper 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 50 50 20 CA714/2 CA714/3 CA714/4 CA714/10 100 50 50 20 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT2G – – – – – 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 11 DOUBLE LEVEL FEED THROUGH OFFSET DOUBLE LEVEL SCREW TERMINAL BLOCKS ODL4U HIGHLIGHTS FEATURES • Top Level is offset by half terminal width from lower level • Offset allows better ac- cess to both levels even when fully wired • Different Endplates for front and back side guarantee flush mounting to neighboring terminal blocks or end stops (EPODL4U and EP1ODL4U) APPLICATIONS • High density writing applications Dimensions & Weight Width 6 mm Length 68 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 65.0 mm 71.1 mm Weight per piece 14.5 g Technical Data/Ratings Approvals 60947-7-1 E220514 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800 VAC/DC Current Rating 35 A 32 A Torque 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Installation Instructions Wire Stripping Length 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W ODL4U ODL4U/R ODL4U/BU ODL4U/BL ODL4U/O ODL4U/G ODL4U/Y ODL4U/W Cat. No. Accessories 12 ODL4U (without End Plates) Std. Pk. 100 100 100 100 100 100 100 100 EPODL4U (Front) EP1ODL4U (Back) 50 50 Separator Plate SPCDL4U 100 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA727/2 CA727/3 CA727/4 CA727/10 CA727/100 100 100 100 10 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA747/2 CA747/3 CA747/4 CA747/10 CA747/100 100 100 100 10 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA707/TS/01 Marking Tag MT6 End Plate (Front) EPODL4U Std. Pk. End Plate Test Socket ODL4U (with End Plates) 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 End Plate (Back) EP1ODL4U DOUBLE LEVEL FEED THROUGH DOUBLE LEVEL SCREW TERMINAL BLOCKS ODL2.5 ODLG2.5(I.S) ODLG2.5 ODL2.5(I.S) Double Level with Offset Double Level with Offset Internally Shorted Upper / Lower Level Double Level with Offset Ground Connection Double Level with Offset Internally Shorted / Ground Connection Width 5 mm 5 mm 5 mm 5 mm Length 62.0 mm 62.0 mm 62.0 mm 62.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 63.0 mm 70.5 mm 63.0 mm 70.5 mm 63.0 mm 70.5 mm 63.0 mm 70.5 mm 13.0 g 14.2 g 15.3 g 17.0 g Dimensions & Weight Weight per piece UL Technical Data/Ratings Approvals UL 60947-7-1 UL 60947-7-1 UL 60947-7-1 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 300 V 800 V AC/DC 300 V 800 V AC/DC 300 V 800 V AC/DC 300 V 800 V AC/DC Current Rating 25 A 24 A 25 A 24 A 25 A 24 A 24 A 24 A 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm Wire Size (solid / stranded) Torque Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions 8 mm 8 mm 8 mm 8 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Wire Stripping Length Screwdriver Terminal Blocks Grey Stackable Clip-on Accessories Cat. No. Std. Pk. ODL2.5 ODL2.5A 50 50 Cat. No. Std. Pk. Cat. No. ODL2.5(I.S) ODL2.5A(I.S) Cat. No. Std. Pk. 50 50 Std. Pk. Cat. No. ODLG2.5 ODLG2.5A Cat. No. Std. Pk. 50 50 Std. Pk. Cat. No. ODLG2.5(I.S) ODLG2.5A(I.S) Cat. No. Std. Pk. 50 50 Std. Pk. EPODL2.5 EP1ODL2.5 50 50 EPODL2.5 EP1ODL2.5 50 50 EPODL2.5 EP1ODL2.5 50 50 EPODL2.5 EP1ODL2.5 50 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 100 50 50 50 10 10 10 10 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 100 50 50 50 10 10 10 10 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 100 50 50 50 10 10 10 10 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 MT5 End Plate Shorting Link/ Jumpers Marking Tag Front Side Back Side 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 100 50 50 50 10 10 10 10 1 Pk. (100 tags) 13 TRIPLE LEVEL FEED THROUGH TRIPLE LEVEL SCREW TERMINAL BLOCKS CTL2.5U CTL2.5U-H CTL2.5U(I.S) HIGHLIGHTS FEATURES • 3 Feed through levels • Marking Tag space on all 3 levels • Independent Levels and internally shorted version CTL2.5U(I.S) • LED versions to show switching indication in various voltages CTL2.5U(L)/XX • 3 Level terminal with additional grounding level CTLG2.5 Dimensions & Weight Width 6 mm 6 mm 6 mm Length 84.0 mm 61.0 mm 84.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 68.0 mm 75.6 mm 68.0 mm 75.6 mm 68.0 mm 75.6 mm 20.0 g 21.0 g 21.0 g Weight per piece Technical Data/Ratings Approvals sensor applications • Actuator applications • Motor applications • Applications with high wire density 60947-7-1 E220514 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm 22-12 AWG 0.2-2.5 mm2 Voltage Rating 300 V 500 V AC/DC 300 V 500 V AC/DC 150 V 500 V AC/DC Current Rating 25 A 24 A 25 A 24 A 25 A 24 A 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm Torque 2 Polyamide 66 Polyamide 66 Polyamide 66 9 mm 9 mm 9 mm Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Insulation Material Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. CTL2.5U CTL2.5U/R CTL2.5U/BU CTL2.5U/BL CTL2.5U/O CTL2.5U/G CTL2.5U/Y CTL2.5U/W Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Accessories 14 60947-7-1 E220514 22-12 AWG Wire Size (solid / stranded) APPLICATIONS • Control Systems with 60947-7-1 E220514 Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. CTL2.5U-H CTL2.5U-H/R CTL2.5U-H/BU CTL2.5U-H/BL CTL2.5U-H/O CTL2.5U-H/G CTL2.5U-H/Y CTL2.5U-H/W Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. Std. Pk. CTL2.5U(I.S) CTL2.5U(I.S)/R CTL2.5U(I.S)/BU CTL2.5U(I.S)/BL CTL2.5U(I.S)/O CTL2.5U(I.S)/G CTL2.5U(I.S)/Y CTL2.5U(I.S)/W Cat. No. 50 50 50 50 50 50 50 50 Std. Pk. End Plate EPCTL2.5U 50 EPCTL2.5U-H 50 EPCTL2.5U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) TRIPLE LEVEL FEED THROUGH TRIPLE LEVEL SCREW TERMINAL BLOCKS CTL2.5U-H(L)/XX CTLG2.5 CTL2.5UH(I.S)D2 CTL2.5U(L)/XX Dimensions & Weight Width 6 mm 6 mm 6 mm 6 mm Length 61.0 mm 84.0 mm 61.0 mm 87.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 68.0 mm 75.6 mm 68.0 mm 75.6 mm 68.0 mm 75.6 mm 66.0 mm 74.0 mm 21.0 g 21.0 g 15.1 g 27.4 g Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 22-12 AWG 0.2-2.5 mm 22-12 AWG 0.2-2.5 mm 22-12 AWG 0.2-2.5 mm 24-12 AWG 0.2-2.5 mm2 300 V 500 V AC/DC 300 V 500 V AC/DC 150 V 500 V AC/DC 300 V 440 V Voltage Rating 2 2 25 A 24 A 25 A 24 A 25 A 24 A 24 A 24 A 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm Current Rating Torque 2 Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 9 mm 9 mm 9 mm 9 mm Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Flat Head 0.6 x 3.5 mm Insulation Material Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CTL2.5UH(I.S)D2 Grey LED Voltage 12 V LED Voltage 24 V LED Voltage 48 V LED Voltage 110 V LED Voltage 220 V CTL2.5U-H(L)/12 CTL2.5U-H(L)/24 CTL2.5U-H(L)/48 CTL2.5U-H(L)/110 CTL2.5U-H(L)/220 Accessories Cat. No. 50 50 50 50 50 Std. Pk. CTL2.5U(L)/12 CTL2.5U(L)/24 CTL2.5U(L)/48 CTL2.5U(L)/110 CTL2.5U(L)/220 Cat. No. 50 50 50 50 50 50 Std. Pk. Cat. No. Cat. No. CTLG2.5 Yellow/Green Std. Pk. 100 Std. Pk. Cat. No. Std. Pk. End Plate EPCTL2.5U-H 50 EPCTL2.5U 50 EPCTL2.5U-H 50 EPCTLG2.5 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA627/2 CA627/3 CA627/4 CA627/10 – 100 100 100 10 – External Jumper 2 pole 3 pole 4 pole 10 pole CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2G Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) 15 GROUND GROUND/EARTH TERMINAL BLOCKS SCREW TERMINAL BLOCKS CGT4U CGT4N CGT6N HIGHLIGHTS FEATURES • Yellow/Green color code as per industry standard • Clamp mechanically on Rail by tightening middle screw • Rail serves as grounding busbar to feed ground potential to all other grounding terminals • CGT4N, CGT6N, CGT10N and CGT16N have same profile as respective feed through blocks • CGT4U, CGT10U, and CGT35U mount on both 35mm and 32mm DIN-Rail APPLICATIONS • Grounding Applications Dimensions & Weight Width 6 mm 6 mm 8 mm Length 43 mm 54.2 mm 54.5 mm 49.5 mm 56.7 mm 47.0 mm 54.4 mm 48.2 mm 55.8 mm 21.5 g 22.0 g 27.0 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals AEx ell Ex ell U Wire Size (solid / stranded) 60947-7-1 E220514 22-10 AWG Voltage Rating 600 V Current Rating 60947-7-1 E220514 0.2-4 mm2 22-10 AWG 800 V AC/DC 600 V – Torque 7.0 lb-in Insulation Material 22-8 AWG 1000 V AC/DC 600 V – 0.5 Nm 7 lb-in Polyamide 66 0.2-6 mm2 1000 V AC/DC – 0.5 Nm 14 lb-in Polyamide 66 1.6 Nm Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 8 mm 8 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4.0 mm Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green CGT4U 50 CGT4N 50 CGT6N 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCGT4U/Y 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 Marking Tag MT6 1 Pk. (100 tags) – 2511120 CA701-15/S 2511160 MT6 – 20 20 10 1 Pk. (100 tags) – 2511120 CA701-15/S 2511160 MT8 Assembly example for single phase 3 wire circuits. 16 60947-7-1 E220514 0.2-4 mm2 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 – 20 20 10 1 Pk. (100 tags) GROUND GROUND/EARTH TERMINAL BLOCKS SCREW TERMINAL BLOCKS CGT10U CGT10N CGT16N CGT35U Dimensions & Weight Width 10 mm 10 mm 12 mm 16 mm Length 45.0 mm 55.0 mm 55.0 mm 58.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 51.0 mm 58.2 mm 48.5 mm 56.0 mm 48.5 mm 56.0 mm 63.7 mm 70.5 mm 30.5 g 35.2 g 39.6 g 102.0 g Weight per piece IEC Technical Data/Ratings Approvals E220514 AEx ell Ex ell U Wire Size (solid / stranded) Voltage Rating 60947-7-1 16-8 AWG 22-6 AWG 0.2-10 mm2 600 V 600 V Current Rating 60947-7-1 E220514 16-6 AWG 1000 V AC/DC 14 lb-in Torque Insulation Material 0.2-10 mm2 20-4 AWG 1000 V AC/DC 600 V 600 V – 60947-7-1 E220514 – 14 lb-in 1.6 Nm 14 lb-in Polyamide 66 E220514 0.2-16 mm2 8-2 AWG 1000 V AC/DC 600 V – 1.6 Nm 14 lb-in Polyamide 66 2.5-35 mm2 1000 V AC/DC – 1.6 Nm 25 lb-in Polyamide 66 2.8 Nm Polyamide 66 Installation Instructions 11 mm 11 mm 12 mm 15 mm Flat Head 0.8 x 4.0 mm Flat Head 0.8 x 4.0 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green CGT10U 50 CGT10N 50 CGT16N 50 CGT35U 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate – DIN Rail 2511120 CA701-15/S 2511160 Marking Tag MT10 – 20 20 10 1 Pk. (100 tags) – 2511120 CA701-15/S 2511160 MT10 – 20 20 10 1 Pk. (100 tags) – 2511120 CA701-15/S 2511160 MT12 – 20 20 10 1 Pk. (100 tags) – 2511120 CA701-15/S 2511160 MT16 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 – 20 20 10 1 Pk. (100 tags) 17 FUSE BLOCKS FUSE BLOCKS, 5 x 20 and 5 x 25 mm SCREW TERMINAL BLOCKS CF4U CF4U(L)/6-60V CF4U(L)/110-240V HIGHLIGHTS FEATURES • CF4U Series accepts 5x20mm/ 5x25mm fuse types • Completely enclosed, no endplates • CF4U(L) version with LED for blown fuse indication • Large marking area • No polarity required • Blocks can be used for AC & DC Voltages APPLICATIONS • Control systems with fuse protection 220KΩ 27KΩ Dimensions & Weight Width 8 mm 8 mm 8 mm Length 57.0 mm 57.0 mm 57.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 50.3 mm 57.6 mm 50.3 mm 57.6 mm 50.3 mm 57.6 mm 14.8 g 15.4 g 15.4 g Weight per piece Technical Data/Ratings Approvals 60947-7-3 E220514 60947-7-3 E220514 60947-7-3 E220514 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating 10 A 6.3 A 10 A 6.3 A 10 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Wire Size (solid / stranded) Polyamide 66 Polyamide 66 Polyamide 66 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm - 6-60V AC/DC 110-240V AC/DC Insulation Material Fuse Specifications Fuse Type LED Indicator Voltage Installation Instructions 9.5 mm 9.5 mm 9.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Blue BU Black BL Accessories 2 pole 3 pole 4 pole 10 pole On Terminal On Fuse Carrier Std. Pk. CF4U(L)/6-60V CF4U(L)/6-60V/BU CF4U(L)/6-60V/BL Cat. No. 50 50 50 Std. Pk. Cat. No. Std. Pk. CF4U(L)/110-240V 50 CF4U(L)/110-240V/BU 50 CF4U(L)/110-240V/BL 50 Cat. No. Std. Pk. 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 MT8 MT6 Fuses 5 x 20 mm 18 Std. Pk. Cat. No. 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 MT6 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 MT6 1 Pk. (100 tags) 1 Pk. (100 tags) Current Rating 0.1A 0.2A 0.5A Slow Blow Cat. No 0.1M5x20T 0.2M5x20T 0.5M5x20T Fast Blow Cat. No 0.1M5x20F 0.2M5x20F 0.5M5x20F Ø5mm (0.2 in.) 1.0A 2.0A 4.0A 1.0M5x20T 2.0M5x20T 4.0M5x20T 1.0M5x20F 2.0M5x20F 4.0M5x20F 20mm (0.79 in.) Marking Tag 50 50 50 Cat. No. DIN Rail External Jumper Std. Pk. CF4U CF4U/BU CF4U/BL 5.0A 6.3A 8.0A 10.0A 5.0M5x20T 6.3M5x20T 8.0M5x20T 10.0M5x20T 5.0M5x20F 6.3M5x20F 8.0M5x20F 10.0M5x20F Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 FUSE BLOCKS FUSE BLOCKS, 5 x 20 and 5 x 25 mm CF4SP SCREW TERMINAL BLOCKS CF4SP(L)/6-60V CF4SP(L)/110-240V HIGHLIGHTS FEATURES • CF4SP Series accepts 5x20mm fuse types • 6mm wide, compact design • Internal shorting channel • Completely enclosed, no 220KΩ 27KΩ Dimensions & Weight Width 6 mm 6 mm 6 mm Length 58.5 mm 58.5 mm 58.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 70.0 mm 77.5 mm 70.0 mm 77.5 mm 70.0 mm 77.5 mm 16.9 g 17.4 g 17.4 g Weight per piece endplates • CF4SP(L) version with LED for blown fuse indication • No polarity required Technical Data/Ratings Approvals 60947-7-3 E220514 60947-7-3 E220514 60947-7-3 E220514 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000 V AC/DC 600 V 1000 V AC/DC 600 V 1000 V AC/DC Current Rating 10 A 10 A 10 A 10 A 10 A 10 A 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Wire Size (solid / stranded) Torque Polyamide 66 Polyamide 66 Polyamide 66 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm - 6-60V AC/DC 110-240V AC/DC Insulation Material APPLICATIONS • Control systems with fuse protection • Control Circuits with alternating configuration with (CF4SPFT, CKT4SP, etc...) Fuse Specifications Fuse Type LED Indicator Voltage Installation Instructions 8 mm 8 mm 8 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Blue BU Black BL CF4SP CF4SP/BU CF4SP/BL Accessories Cat. No. Insulated Internal Jumper External Jumper Marking Tag 50 50 50 Std. Pk. Cat. No. Std. Pk. CF4SP(L)/6-60V CF4SP(L)/6-60V/BU CF4SP(L)/6-60V/BL Cat. No. 50 50 50 Std. Pk. Cat. No. Std. Pk. CF4SP(L)/110-240V 50 CF4SP(L)/110-240V/BU50 CF4SP(L)/110-240V/BL50 Cat. No. 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 On Terminal On Fuse Carrier MT6 MT6 1 Pk. (100 tags) 1 Pk. (100 tags) MT6 MT6 1 Pk. (100 tags) 1 Pk. (100 tags) MT6 MT6 CF4SPFT Std. Pk. 2511120 CA701-15/S 2511160 DIN Rail Internal Jumper Std. Pk. Feed Through Terminal Same Profile as CF4SP Technical Data/Ratings E220514 60947-7-1 24-10 AWG 0.2-4 mm2 600 V 1000 V 30 A 32 A 4.5 lb-in 0.5 Nm Polyamide 66 1 Pk. (100 tags) 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 19 FUSE BLOCKS DOUBLE LEVEL FUSE BLOCKS, 5 x 20 / 5 x 25 mm SCREW TERMINAL BLOCKS DDFL4U(E)/XX DDFL4U HIGHLIGHTS FEATURES • Top Level fuse link for 5x20mm/ 5x25mm fuse types • Bottom Level Feed through terminal • DDFL4U(E) version with LED for blown fuse indication in various voltages • Blocks can be used in AC & DC applications Width 8 mm 8 mm Length 88 mm 88 mm 67.4 mm 74.3 mm 67.4 mm 74.3 mm 28.0 g 27.0 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals • No need for additional Feed through terminal 60947-7-1 E220514 Wire Size (solid / stranded) APPLICATIONS • Tight space fuse applications Dimensions & Weight 60947-7-1 E220514 22-10 AWG 0.2-4 mm 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating (top) 6.3 A 6.3 A 6.3 A 6.3 A Current Rating (bottom) 35 A 32 A 35 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material 2 Polyamide 66 Polyamide 66 Fuse Specifications Fuse Type 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm - 24V, 48V, 110V, 220V, 440V LED Indicator Voltage Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Grey LED Voltage 24V AC/DC LED Voltage 48V AC/DC LED Voltage 110V AC/DC LED Voltage 220V AC/DC LED Voltage 440V AC Accessories 9.5 mm Flat Head 0.6 x 3.5 mm Cat. No. Std. Pk. DDFL4U 20 Cat. No. Std. Pk. DDFL4U(E)/24 DDFL4U(E)/48 DDFL4U(E)/110 DDFL4U(E)/220 DDFL4U(E)/440 20 20 20 20 20 Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPDDFL4U 50 EPDDFL4U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Internal Jumper 2 pole 3 pole 4 pole 10 pole CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 Marking Tag 20 9.5 mm Flat Head 0.6 x 3.5 mm on terminal on lever MT8 MT2 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 MT2 1 Pk. (100 tags) 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 DOUBLE LEVEL FUSE BLOCKS, 5 x 20 / 5 x 25 mm WITH 2 CONNECTION POINTS DDFL4ULR FUSE BLOCKS SCREW TERMINAL BLOCKS DDFL4U(E)LR/XX HIGHLIGHTS FEATURES • Modified version of DDFL4U with 2 equipotential Dimensions & Weight • DDFL4U(E) version with Width 8 mm 8 mm Length 88 mm 88 mm 67.4 mm 74.3 mm 67.4 mm 74.3 mm 24.5 g 27.0 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece LED for blown fuse indication in various voltages • Blocks can be used in AC & DC applications Technical Data/Ratings Approvals 60947-7-1 E220514 Wire Size (solid / stranded) 60947-7-1 E220514 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating (top) 6.3 A 6.3 A 6.3 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 APPLICATIONS • Control Circuits with multi wire fuse application Polyamide 66 Fuse Specifications Fuse Type 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm - 24V, 48V, 110V, 220V, 440V 9.5 mm 9.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm LED Indicator Voltage Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey LED Voltage 24V AC/DC LED Voltage 48V AC/DC LED Voltage 110V AC/DC LED Voltage 220V AC/DC LED Voltage 440V AC Accessories DDFL4ULR Std. Pk. Cat. No. Std. Pk. 20 DDFL4U(E)LR/24 DDFL4U(E)LR/48 DDFL4U(E)LR/110 DDFL4U(E)LR/220 DDFL4U(E)LR/440 20 20 20 20 20 Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPDDFL4U 50 EPDDFL4U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 Internal Jumper 2 pole 3 pole 4 pole 10 pole CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 Marking Tag on terminal on lever MT8 MT2 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 MT2 1 Pk. (100 tags) 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 21 FUSE BLOCKS FUSE BLOCKS, SCREW TERMINAL BLOCKS CAFL4U 1/4 x 1 and CAFL4U(L)/XX 1/4 x 11/4 in. CAFL4U(N) HIGHLIGHTS FEATURES • CAFL4U Series accepts • • • • 1/4” x 1-1/4” (6.3x32mm) fuse types CAFL4U(L) versions with LED for blown fuse indication (24V, 48V, 110V, 220V) CAFL4U(N) version with Neon bulb for blown fuse indication Large marking area Blocks can be used in AC & DC applications APPLICATIONS • Control systems with 1/4” x 1-1/4” fuse protection Dimensions & Weight Width 9 mm 9 mm 9 mm Length 72 mm 72 mm 72 mm 55.3 mm 63.0 mm 55.3 mm 63.0 mm 55.3 mm 63.0 mm 20.5 g 20.5 g 20.5 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals 60947-7-3 E220514 Wire Size (solid / stranded) 60947-7-3 E220514 60947-7-3 E220514 22-10 AWG 0.2-4 mm 22-10 AWG 0.2-4 mm 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000 V 600 V 1000 V 600 V 1000 V Current Rating 16 A 6.3 A 16 A 6.3 A 16 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material 2 Polyamide 66 2 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver 9.5 mm 9.5 mm 9.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm 1/4” x 1” (6.3 x 32 mm) 1/4” x 1” (6.3 x 32 mm) 1/4” x 1” (6.3 x 32 mm) - 24V, 48V, 110V, 220V 110V - 240V Fuse Specifications Fuse Type LED/Neon Indicator Voltage Terminal Blocks Cat. No. Grey (standard) Blue BU Black BL LED Voltage 24V AC/DC LED Voltage 48V AC/DC LED Voltage 110V AC/DC LED Voltage 220V AC/DC Neon Bulb 110-300V AC/DC Accessories Std. Pk. Cat. No. – – – – – – – CAFL4U(L)/24 CAFL4U(L)/48 CAFL4U(L)/110 CAFL4U(L)/220 – Std. Pk. – – – – – – – 25 25 25 25 CAFL4U(N) 25 Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCAFL4U 50 EPCAFL4U 50 EPCAFL4U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 20 CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 20 CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 20 Current Rating 0.1A 0.2A 0.5A 1.0A 2.0A MT9 Slow Blow Cat. No 0.1M6.3x32T 0.2M6.3x32T 0.5M6.3x32T 1.0M6.3x32T 2.0M6.3x32T 1 Pk. (100 tags) Fast Blow Cat. No 0.1M6x32F 0.2M6x32F 0.5M6x32F 1.0M6x32F 2.0M6x32F MT9 Current Rating 4.0A 5.0A 6.3A 8.0A 10.0A 1 Pk. (100 tags) Slow Blow Cat. No 4.0M6.3x32T 5.0M6.3x32T 6.3M6.3x32T 8.0M6.3x32T 10.0M6.3x32T MT9 Fast Blow Cat. No 4.0M6x32F 5.0M6x32F 6.3M6x32F 8.0M6x32F 10.0M6x32F Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) Ø6.3mm (0.25 in.) 32mm (1.25 in.) 2 pole 3 pole 4 pole 10 pole Marking Tag 22 Cat. No. 25 25 25 Cat. No. External Jumper Fuses 1/4” x 1-1/4” (6.3 x 32mm) Std. Pk. CAFL4U CAFL4U/BU CAFL4U/BL FUSE BLOCKS COMPONENT CARRIER TERMINAL BLOCKS CCC4U SCREW TERMINAL BLOCKS CPF CPFL6-60V CPFL110-240V 27KΩ 27KΩ Dimensions Width 6 mm 6 mm 6 mm 6 mm Length 58.5 mm 28 mm 28 mm 28 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 46 mm 53.5 mm 35 mm 35 mm 35 mm 10.2 g 3.8 g 3.8 g 4.2 g Weight per piece Technical Data/Ratings Approvals 60947-7-1 Wire Size (solid | stranded) E220514 60947-7-1 E220514 60947-7-3 E220514 60947-7-3 0.2-6 mm2 | 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 1000 V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating * 1A 1A 10 A 10 A 10 A 10 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Component carrier base Plug module with diode Diode Type IN4007 – – Polyamide 66 Carrier Specifications Component Type LED Indicator Voltage Plug module for 5x20 mm fuse Plug module for 5x20 mm fuse with LED indicator – 6-60V AC/DC 110-240V AC/DC Installation Instructions Wire Stripping Length Screwdriver 8 mm 10 mm 10 mm 10 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Grey (standard) CCC4U 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Accessories Cat. No. CPF Std. Pk. 50 Cat. No. CPFL6-60V Std. Pk. 50 Cat. No. CPFL110-240V Std. Pk. 50 DIN Rail 2511120 CA701-15/S 20 10 – – – – – – – – – – – – End Stop CA702 CA802 CA103 50 50 50 – – – – – – – – – – – – – – – – – – CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Internal Jumpers Marking Tag 2 pole 3 pole 4 pole 10 pole 100 pole MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) * Current Rating is based on plug used. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 23 FUSE HOLDERS FUSE HOLDERS, 10 x 38 mm and CC Type 10x38 Midget Fuse Holders Pole Configuration E212627 Without Indication With LED Indication Fuse Size Max Voltage & Current IEC UL Drawing No. PCF 10 & PCF 10 LED 1-pole 002550001 1-pole+N 002550002 2-pole 002550003 3-pole 002550004 3-pole+N 002550005 002550011 002550012 002550013 002550014 002550015 10x38 10x38 10x38 10x38 10x38 690V AC / 32A 690V AC / 32A 690V AC / 32A 690V AC / 32A 690V AC / 32A 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 1 1 1 1 1 EFD 10 & EFD 10 LED 1-pole 002540001 1-pole+N 002540002 2-pole 002540003 3-pole 002540004 3-pole+N 002540005 002540011 002540012 002540013 002540014 002540015 10x38 10x38 10x38 10x38 10x38 690V AC/DC / 32A 690V AC/DC / 32A 690V AC/DC / 32A 690V AC/DC / 32A 690V AC/DC / 32A 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 2 2 2 2 2 Without Indication With LED Indication Fuse Size SCR PCF CC & PCF CC LED 1-pole 002550101 2-pole 002550103 3-pole 002550104 002550111 002550113 002550114 CC Type CC Type CC Type 200 kA 200 kA 200 kA 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 1 1 1 EFD CC & EFD CC LED 1-pole 002540101 2-pole 002540103 3-pole 002540104 002540111 002540113 002540114 CC Type CC Type CC Type 200 kA 200 kA 200 kA 600V AC / 30A 600V AC / 30A 600V AC / 30A 2 2 2 EFD J30 DC & EFD J30 10 DC LED 1-pole 002570101 002570111 2-pole 002570103 002570113 3-pole 002570104 002570114 J-TYPE J-TYPE J-TYPE 200 kA 200 kA 200 kA 600V AC/DC / 30A 600V AC/DC / 30A 600V AC/DC / 30A 3 3 3 Pole Configuration With LED Indication Fuse Size PCF 10 DC & PCF 10 DC LED 1-pole 002550201 2-pole 002550203 002550211 002550213 10x38 10x38 1000V DC / 25A 1000V DC / 25A 1000V DC / 25A 1000V DC / 25A 1 1 EFH 10 DC & EFH 10 DC LED 1-pole 002540201 2-pole 002540203 002540211 002540213 10x38 10x38 1000V DC / 25A 1000V DC / 25A 1000V DC / 25A 1000V DC / 25A 2 2 EFH 14 DC & EFH 14 DC LED 1-pole 002560201 2-pole 002560203 002560211 002560213 14x51 14x51 1000V DC / 50A 1000V DC / 50A 1000V DC / 50A 1000V DC / 50A 3 3 Pole Configuration Without Indication With LED Indication Fuse Size EFD 14 & EFD 14 LED 1-pole 002560001 1-pole+N 002560002 2-pole 002560003 3-pole 002560004 3-pole+N 002560005 002560011 002560012 002560013 002560014 002560015 14x51 14x51 14x51 14x51 14x51 690V AC / 50A 690V AC / 50A 690V AC / 50A 690V AC / 50A 690V AC / 50A 600V AC/DC / 50A 600V AC/DC / 50A 600V AC/DC / 50A 600V AC/DC / 50A 600V AC/DC / 50A 3 3 3 3 3 EFD 22 & EFD 22 LED 1-pole 002570001 1-pole+N 002570002 2-pole 002570003 3-pole 002570004 3-pole+N 002570005 002570011 002570012 002570013 002570014 002570015 22x58 22x58 22x58 22x58 22x58 690V AC / 100A 690V AC / 100A 690V AC / 100A 690V AC / 100A 690V AC / 100A 600V AC/DC / 100A 600V AC/DC / 100A 600V AC/DC / 100A 600V AC/DC / 100A 600V AC/DC / 100A 4 4 4 4 4 CC Type and J Type Fuse Holders Pole Configuration E212627 UL Rating Voltage/Amp. Drawing No. PV Type Fuse Holders E356295 Without Indication Max Voltage & Current IEC UL Drawing No. E356295 IEC Type Fuse Holders E212627 24 Max Voltage & Current IEC UL Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Drawing No. FUSE HOLDERS FUSE HOLDERS, 10 x 38 mm and CC Type 1 2 64 43.8 75 17.8 81 37 47.3 6.8 PCF Type EFD10 and EFH10 Type 3 4 83 93 69 69 6.8 43.5 27 6.8 35.6 116.8 120.4 90 94 45 45 43.5 17.5 4 45 83.3 64.4 45.1 59.5 56.8 56.8 EFD 14 Type EFD 22 Type NOTE: All dimensions are shown in millimeters. To convert to inches multiply by 0.03937 Accessories for The Modular Type PCF, EFD and EFH Modular fuse holders have a unique user configurable feature. By using the modular snap kit (parts sold individually) a customer can configure any pole configuration by inserting the connecting element (3 per pole) into the slot in the side of the fuse holder and then pushing them together and inserting the connecting shaft into the handle. Model No. 002559001 002569001 002579001 NOTE: 1 kit suffices for the assembly of 50 sets. 2 Pole Connection Kits Model No. Usable with 002540948 EFD 8, EFD 10, EFH 10, PCF 8, PCF 10, EFD CC, PCF CC 002560948 EFD 14, EFH 14 002570948 EFD 22, EFD J30 Auxiliary Switches Usable with PCF 10 EFD 14 EFD 22 Type 1NO/1NC 1NO/1NC 1NO/1NC For Auxiliary switches to operate, a fuse with striker pin must be used. 3 Pole Connection Kits Model No. Usable with 002540949 EFD 8, EFD 10, PCF 8, PCF 10, EFD CC, PCF CC 002560949 EFD 14 002570949 EFD 22, EFD J30 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 25 DISCONNECT & TEST DISCONNECT AND TEST TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDS6U CDS6U/TS Slider Disconnect Terminal Slider Disconnect Terminal Including Test Sockets Feed Through Terminal with CDS6U profile Width 8 mm 8 mm 6 mm Length 82 mm 82 mm 82 mm 51.0 mm 59.2 mm 51.0 mm 59.2 mm 51.0 mm 59.2 mm 33.8 g 33.8 g 21.2 g CDS6U/FT HIGHLIGHTS FEATURES • Slider Style Disconnect Terminals • CDS6U - Standard Slider Disconnect • CDS6U/TS - Slider Disconnect with integrated testing points • CDS6U/FT - Same profile Feed-Through • Separate Testing points allow insertion of standard test probes • Disconnect is achieved b operating sliding link wit screw driver • SLS2, SLS4 slide shorting link system • QJ8/2 - Shorting Plug APPLICATIONS (see following page) • Disconnect & Test Applications • Measuring / Control Circuits • Utility Instruments an Transformer Applications • Meter Replacement • External Current Measurement • Switch Boards Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 22-8 AWG 0.2-6 mm 22-8 AWG 0.2-6 mm 22-8 AWG 0.2-6 mm2 600 V 800 V 600 V 800 V 600 V 800 V Voltage Rating Current Rating Torque 2 2 45 A 41 A 45 A 41 A 45 A 41 A 14 lb-in 0.8 Nm 14 lb-in 0.8 Nm 14 lb-in 0.8 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 10 mm 10 mm 10 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CDS6U CDS6U/R CDS6U/BU CDS6U/BL CDS6U/O CDS6U/G CDS6U/Y CDS6U/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CDS6U/TS CDS6U/TS/R CDS6U/TS/BU CDS6U/TS/BL CDS6U/TS/O CDS6U/TS/G CDS6U/TS/Y CDS6U/TS/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CDS6U/FT CDS6U/FT/R CDS6U/FT/BU CDS6U/FT/BL CDS6U/FT/O CDS6U/FT/G CDS6U/FT/Y CDS6U/FT/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDS6U 50 EPCDS6U 50 EPCDS6U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA723/2 CA723/3 CA723/4 CA723/10 100 50 50 10 CA723/2 CA723/3 CA723/4 CA723/10 100 50 50 10 CA723/2 CA723/3 CA723/4 CA723/10 100 50 50 10 Internal Jumper 26 60947-7-1 E220514 CB SCHEME 2 pole 3 pole 4 pole 10 pole Slide Shorting Link 2 pole 3 pole 4 pole SLS2 SLS3 SLS4 50 25 25 SLS2 SLS3 SLS4 50 25 25 – – – – – – Insulated Test Socket grey red yellow blue black TPSLS TPSLSR TPSLSY TPSLSBU TPSLSBK 100 100 100 100 100 – – – – – – – – – – – – – – – – – – – – Lock Out Cap LCCDS 50 LCCDS 50 – – Shorting Plug QJ8/2 25 QJ8/2 25 – – Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) DISCONNECT & TEST Example for CDS6U Test & Disconnect Terminal Block Single Phase Current Transformer Test Circuit SCREW TERMINAL BLOCKS 3 Phase current Transformer Test Set LCCDS EPCDS6U EPCDS66 SLS2 CA72315 LCCDS CDS6U SLS2 CA202 CDSGU CA202 Operating status Operating status A 1 2 A 1 A A 2 1 2 3 4 5 6 (with internal distribution of the k-point) S1 S2 S1 S2 S1 S2 S1 S2 SLS2 in open condition SLS2 in open condition L1 L1 Comparison measurement for L1 L2 L3 Comparison measurement for L1 A 1 2 1 Sequence for test : 1) Remove SLS2 screw from terminal 2. 2) Connect ammeter to test sockets of terminal 2. 3) Open disconnect slide link of terminal 2. 2 A A 1 A 2 3 A 4 5 6 2) Connect ammeter to test sockets of terminal 1 and 2. 3) Open disconnect slide link of terminal 1. A S1 S2 S1 SLS2 in open condition L1 Meter test for L1 through external power supply Sequence for test : 1) Remove SLS2 screw from terminal 1. S2 S1 L1 S2 S1 L2 S2 L3 Meter test for L1 through external power supply A 1 2 1 S1 2 Sequence for test : 1) Close short circuit slide SLS2 of terminals 1 and 2. 2) Open disconnect slide link of terminal 2. 3) Connect external power supply to test sockets of terminals 1 and 2. S2 A A A 1 2 3 4 5 6 S1 S2 S1 S2 S1 S2 Sequence for test : 1) Close short circuit slide SLS2 of terminals 1 and 2. 2) Open disconnect slide link of terminal 1. 3) Connect external power supply to test sockets of terminals 1 and 2. Closing of SLS2 L1 L1 L2 L3 Meter Replacement for L1 Meter replacement A 1 1 S1 2 2 Sequence for test : 1) Close short circuit slide SLS2 of terminals 1 and 2. 2) Open disconnect slide link of terminal 2. 3) Disconnect meter for L1 at terminals 1 and 2. S2 A A A 1 2 3 4 5 6 S1 S2 S1 S2 S1 S2 Sequence for test : 1) Close short circuit slide SLS2 of terminals 1 and 2. 2) Open disconnect slide link of terminal 1. 3) Disconnect meter for L1. Closing of SLS2 L1 L1 L2 L3 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 27 DISCONNECT & TEST BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CKT4U CKT4U/4 HIGHLIGHTS FEATURES • Knife / Blade Style Discon- • nect Terminals • CKT4U - Standard Knife Disconnect • CKT4U/4 - 4 Connection Knife Disconnect Specially designed socket headed screws act as fast monitoring points APPLICATIONS • Disconnect & Test Applications Knife Style Disconnect 2 Connections Dimensions & Weight Knife Style Disconnect 4 Connections Width 6 mm 6 mm Length 46.3 mm 65.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 48.3 mm 56.0 mm 54.3 mm 62.0 mm 10.5 g 16.6 g Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) Voltage Rating 22-10 AWG 22-10 AWG 0.2-4 mm2 600 V 600 V 60947-7-1 E220514 22-10 AWG 0.2-4 mm2 600 V 800 V 800 V Current Rating 35 A 16 A 28 A 20 A 17.5 A Torque 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 8 mm 8 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CKT4U CKT4U/R CKT4U/BU CKT4U/BL CKT4U/O CKT4U/G CKT4U/Y CKT4U/W Accessories 50 50 50 50 50 50 50 50 Cat. No. CKT4U/4 CKT4U/4/R CKT4U/4/BU CKT4U/4/BL CKT4U/4/O CKT4U/4/G CKT4U/4/Y CKT4U/4/W 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. EPCKT4U 50 EPCKT4U/4 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA714/2* CA714/3* CA714/4* CA714/10* 100 100 100 20 Marking Tag 2 pole 3 pole 4 pole 10 pole MT6 1 Pk. (100 tags) Cat. No. Std. Pk. End Plate External Jumper 28 Std. Pk. MT6 Std. Pk. 1 Pk. (100 tags) * Insulated External shorting links can be used only in the upper level clamping unit of the Terminal Block. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 DISCONNECT & TEST BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS CKT4SP SCREW TERMINAL BLOCKS CF4SP CF4SPFT HIGHLIGHTS FEATURES • Knife Style Disconnect Terminal • CF4SPFT same profile Knife Style Disconnect Feed-Through Terminal Fuse Block Same profile as CF4SP Fuse Block Same profile as CF4SP Fuse Block 5x20 mm Fuse Type Width 6 mm 6 mm 8 mm Length 58.5 mm 58.5 mm 57.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 46.0 mm 53.5 mm 46.0 mm 53.5 mm 50.3 mm 57.6 mm 27.2 g g 16.9 g Dimensions & Weight Weight per piece 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 Protection • Fused Control Circuits with 60947-7-1 E220514 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 600 V 1000 V 600 V 1000 V 600 V 1000 V AC/DC Voltage Rating Current Rating Torque 30 A 28 A 30 A 32 A 10 A 10 A 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Insulation Material Fuse Terminal, 5 x 20 mm Fuse Types APPLICATIONS • Control Systems with Fuse Technical Data/Ratings Approvals Feed Through Terminal • CF4SP same profile as Polyamide 66 Polyamide 66 8 mm 8 mm 8 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm alternating configurations (CF4SP, CF4SPFT, CGT4SP) • Switch Boards Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CKT4SP CKT4SP/R CKT4SP/BU CKT4SP/BL CKT4SP/O CKT4SP/G CKT4SP/Y CKT4SP/W Accessories Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. CF4SPFT CF4SPFT/R CF4SPFT/BU CF4SPFT/BL CF4SPFT/O CF4SPFT/G CF4SPFT/Y CF4SPFT/W Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. CF4SP CF4SP/BU CF4SP/BL Cat. No. Std. Pk. 50 50 50 Std. Pk. DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 – – – – – – Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 29 DISCONNECT & TEST SLIDER STYLE DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDTTU CDTTUFT CDTTU-SH HIGHLIGHTS FEATURES • Slider Style Disconnect Terminals • CDTTU - Standard Slider Disconnect • CDTTU-SH - Double Disconnect Terminal • CDTTUFT - Same profile • • Feed-Through Specially designed socket headed screws act as fast monitoring points Disconnect is achieved by operating sliding link with screw driver APPLICATIONS • Disconnect & Test Applications Slider Disconnect Terminal Slider Double Disconnect Terminal Feed Through Terminal Slider Disconnect Profile Width 8 mm 16 mm 8 mm Length 63 mm 63 mm 63 mm 58.7 mm 65.7 mm 58.7 mm 65.7 mm 58.7 mm 65.7 mm 28.5 g 59.2 g 27.1 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 16-8 AWG 1.5-10 mm 16-8 AWG 600 V 800 V 300 V Voltage Rating Current Rating Torque 2 60947-7-1 16-8 AWG 1.5-10 300 V mm2 E220514 60947-7-1 16-8 AWG 1.5-10 mm2 600 V 800 V 160 V 41 A 57 A 25 A 25 A 10 A 41 A 57 A 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 12 mm 12 mm 12 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CDTTU CDTTU/R CDTTU/BU CDTTU/BL CDTTU/O CDTTU/G CDTTU/Y CDTTU/W Accessories 50 50 50 50 50 50 50 50 Cat. No. CDTTU-SH CDTTU-SH/R CDTTU-SH/BU CDTTU-SH/BL CDTTU-SH/O CDTTU-SH/G CDTTU-SH/Y CDTTU-SH/W Std. Pk. 20 20 20 20 20 20 20 20 Cat. No. CDTTUFT CDTTUFT/R CDTTUFT/BU CDTTUFT/BL CDTTUFT/O CDTTUFT/G CDTTUFT/Y CDTTUFT/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDTTU 50 EPCDTTU 50 EPCDTTU 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 QJ8/2 25 QJ8/2 25 QJ8/2 25 CA710/2 CA710/3 CA710/4 CA710/10 100 50 50 20 CA710/2 CA710/3 CA710/4 CA710/10 100 50 50 20 CA710/2 CA710/3 CA710/4 CA710/10 100 50 50 20 Shorting Plug QJ8/2 25 – – QJ8/2 25 Marking Tag MT8 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 1 Pk. (100 tags) Shorting Plug External Jumper 30 Std. Pk. 2 pole 2 pole 3 pole 4 pole 10 pole MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 LEVER STYLE DISCONNECT TERMINAL BLOCKS DISCONNECT & TEST SCREW TERMINAL BLOCKS DDDL4U CSDL4U HIGHLIGHTS FEATURES • Lever Style Disconnect Lever Style Disconnect Lever Style Disconnect Bottom Level Feed Through Width 8 mm 8 mm Length 58 mm 88 mm 44.5 mm 52.0 mm 67.4 mm 74.3 mm 15.0 g 27.0 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Wire Size (solid / stranded) E220514 60947-7-1 22-10 AWG 0.2-4 mm 600 V 1000 V 600 V 600 V 800 V 14 A - 10 A - 6.3 A 35 A 14 A 32 A 10 A 32 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm Voltage Rating Current Rating 60947-7-1 E220514 CB SCHEME Top Bottom Torque Insulation Material 2 Lever Disconnect • DDDL4U - Lever Disconnect with Lower Level Feed-Through • Same profile as CAFL4U APPLICATIONS • Disconnect Applications Technical Data/Ratings Approvals Terminals • CSDL4U - Standard 22-10 AWG 22-10 AWG 0.2-4 mm2 Polyamide 66 Polyamide 66 9.5 mm 9.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CSDL4U CSDL4U/R CSDL4U/BU CSDL4U/BL CSDL4U/O CSDL4U/G CSDL4U/Y CSDL4U/W Accessories Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. Cat. No. DDDL4U DDDL4U/R DDDL4U/BU DDDL4U/BL DDDL4U/O DDDL4U/G DDDL4U/Y DDDL4U/W Cat. No. Std. Pk. 20 20 20 20 20 20 20 20 Std. Pk. End Plate EPCSFL4U 50 EPDDFL4U 50 Isolation Partition PPCSFL4U 50 – – DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 50 CA702 CA802 CA202 50 50 50 Internal Jumper 2 pole 3 pole 4 pole 10 pole – – – – – – – – CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 Insulated Jumper 2 pole 3 pole 4 pole 10 pole – – – – – – – – CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 2 Marking Tag on terminal on lever MT8 MT2 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 MT2 1 Pk. (100 tags) 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 31 DISTRIBUTION SIDE FEED DISTRIBUTION TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDB4/X(1) HIGHLIGHTS FEATURES • Distribution blocks with • • • • • various output configurations Stud/Bolt to secure incoming wire Internally connected terminals Side/center feed versions up to 150A Protective shield for incoming wire APPLICATIONS • Simplified distribution • Width 50A Distribution Terminal Block Side Feed 6 Outputs 8 Outputs 10 Outputs 12 Outputs 14 Outputs 22 Outputs 24 Outputs 52.0 mm 58.0 mm 64.0 mm 70.0 mm 76.0 mm 100.0 mm 106.0 mm Length 43 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 46.2 mm 53.7 mm General Specifications systems Phase distribution application Approvals CB SCHEME • Sum of outgoing wires not to exceed incoming current Higher output currents should be connected close to the input 60947-7-1 E220514 Voltage Rating INSTALLATION  NOTES • Dimensions & Weight 600 V Insulation Material Phase Distribution Application with CDB Terminals 800 V AC/DC Polyamide 66 INPUT Technical Data/Ratings Wire Size (solid / stranded) 10-8 AWG 6-16 mm2 50 A 64 A 26 lb-in 2.0 Nm Current Rating Torque Installation Instructions Wire Stripping Length 8 mm Screwdriver Hex Nut Driver M8 M1 M2 M3 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 Current Rating 35 A 64 A* Torque 7 lb-in 0.5 Nm Installation Instructions Wire Stripping Length 8 mm Screwdriver Terminal Blocks Grey (standard) 6 Outputs 8 Outputs 10 Outputs 12 Outputs 14 Outputs 22 Outputs 24 Outputs Accessories Flat Head 0.6 x 3.5 mm Cat. No. CDB4/2(1) CDB4/3(1) CDB4/4(1) CDB4/5(1) CDB4/6(1) CDB4/10(1) CDB4/11(1) Cat. No. Std. Pk. 10 10 10 5 5 5 5 Std. Pk. DIN Rail 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 Marking Tag MT6 1 Pk. (100 tags) * Total output current of system 32 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 DISTRIBUTION CENTER FEED DISTRIBUTION TERMINAL BLOCKS Dimensions & Weight Width SCREW TERMINAL BLOCKS CDB10/X CDB25/X CDB4/X CDB6/X 50A Distribution Terminal Block Center Feed 100A Distribution Terminal Block Center Feed 130A Distribution Terminal Block Center Feed 150A Distribution Terminal Block Center Feed 44.0 mm 56.0 mm 68.0 mm 80.0 mm 96.0 mm 108.0 mm 48.0 mm 64.0 mm 80.0 mm 96.0 mm - 72.0 mm 92.0 mm 112.0 mm - 88.0 mm 112.0 mm 136.0 mm - 43 mm 48 mm 48 mm 49 mm 46.2 mm 53.7 mm 47.8 mm 55.5 mm 47.8 mm 55.5 mm 57.2 mm 64.7 mm 4 Outputs 8 Outputs 12 Outputs 16 Outputs 20 Outputs 24 Outputs Length Height w DIN Rail 35 x 7.5 mm 35 x 15 mm General Specifications Approvals 60947-7-1 E220514 CB SCHEME Voltage Rating 600 V 800 V AC/DC 600 V Polyamide 66 Insulation Material 60947-7-1 E220514 60947-7-1 E220514 800 V AC/DC 600 V Polyamide 66 60947-7-1 E220514 800 V AC/DC 600 V Polyamide 66 800 V AC/DC Polyamide 66 INPUT Technical Data/Ratings Wire Size (solid / stranded) 10-8 AWG 6-16 mm2 10-2 AWG 6-25 mm2 8-1/0 AWG 10-35 mm2 6-2/0 AWG 10-50 mm2 50 A 64 A 100 A 82 A 130 A 114 A 150 A 150 A 26 lb-in 2.0 Nm 35 lb-in 3.0 Nm 53 lb-in 6.0 Nm 53 lb-in 6.0 Nm Current Rating Torque Installation Instructions Wire Stripping Length Screwdriver 8 mm 9 mm 11 mm 14 mm Hex Nut Driver M8 Hex Nut Driver M10 Hex Nut Driver M13 Hex Nut Driver M15 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-8 AWG 1.5-6 mm2 22-6 AWG 1.5-10 mm2 12-2 AWG 6-25 mm2 Current Rating (per output) 35 A 32 A 50 A 41 A 65 A 57 A 75 A 75 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 22 lb-in 2.0 Nm Installation Instructions 8 mm 9 mm 11 mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Wire Stripping Length Screwdriver Terminal Blocks Grey (standard) 4 Outputs 8 Outputs 12 Outputs 16 Outputs 20 Outputs 24 Outputs Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. CDB4/1 CDB4/2 CDB4/3 CDB4/4 CDB4/5 CDB4/6 10 10 10 10 5 5 CDB6/1 CDB6/2 CDB6/3 CDB6/4 - 10 10 10 5 - Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. CDB10/2 CDB10/3 CDB10/4 Cat. No. Std. Pk. 10 10 5 Std. Pk. Cat. No. CDB25/1 CDB25/2 CDB25/3 CDB25/4 Cat. No. Std. Pk. 10 10 10 5 Std. Pk. DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tag MT6 1 Pk. (100 tags) MT10 1 Pk. (100 tags) MT12 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 33 DISTRIBUTION MULTI I/O DISTRIBUTION TERMINAL BLOCKS SCREW TERMINAL BLOCKS CMDB6/X CMDB4/X Dimensions Width CMDB10/X CMDB25/X 35 A Distribution Terminal Block 50 A Distribution Terminal Block 65 A Distribution Terminal Block 85 A Distribution Terminal Block 13.5 mm 19.5 mm 25.5 mm 61.5 mm 17.5 mm 25.5 mm 33.5 mm 81.5 mm 21.5 mm 31.5 mm 41.5 mm 101.5 mm 26.0 mm 38.0 mm 50.0 mm 62.0 mm 43 mm 48 mm 48 mm 49 mm 46.2 mm 53.7 mm 47.8 mm 55.5 mm 47.8 mm 55.5 mm 57.2 mm 64.7 mm 2 pole 3 pole 4 pole 10 pole Length Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 22-10 AWG 0.2-4 mm 22-8 AWG 1.5-6 mm 22-6 AWG 1.5-10 mm 12-4 AWG 6.0-25 mm2 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 800V AC/DC Voltage Rating 2 2 2 Current Rating 35 A 32 A 50 A 41 A 65 A 57 A 85 A 101 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 22 lb-in 2.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver 8 mm 9 mm 11 mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Terminal Blocks 4 Outputs Grey (standard) Red R Blue BU Black BL 6 Outputs Grey (standard) Red R Blue BU Black BL 8 Outputs Grey (standard) Red R Blue BU Black BL 20 Outputs Grey (standard) Red R Blue BU Black BL Accessories 34 Cat. No. CMDB4/2 CMDB4/2/R CMDB4/2/BU CMDB4/2/BL Cat. No. CMDB4/3 CMDB4/3/R CMDB4/3/BU CMDB4/3/BL Cat. No. CMDB4/4 CMDB4/4/R CMDB4/4/BU CMDB4/4/BL Cat. No. CMDB4/10 CMDB4/10/R CMDB4/10/BU CMDB4/10/BL Cat. No. Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. Cat. No. CMDB6/2 CMDB6/2/R CMDB6/2/BU CMDB6/2/BL Cat. No. CMDB6/3 CMDB6/3/R CMDB6/3/BU CMDB6/3/BL Cat. No. CMDB6/4 CMDB6/4/R CMDB6/4/BU CMDB6/4/BL Cat. No. CMDB6/10 CMDB6/10/R CMDB6/10/BU CMDB6/10/BL Cat. No. Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. Cat. No. CMDB10/2 CMDB10/2/R CMDB10/2/BU CMDB10/2/BL Cat. No. CMDB10/3 CMDB10/3/R CMDB10/3/BU CMDB10/3/BL Cat. No. CMDB10/4 CMDB10/4/R CMDB10/4/BU CMDB10/4/BL Cat. No. CMDB10/10 CMDB10/10/R CMDB10/10/BU CMDB10/10/BL Cat. No. Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 5 5 5 5 Std. Pk. Cat. No. CMDB25/2 CMDB25/2/R CMDB25/2/BU CMDB25/2/BL Cat. No. CMDB25/3 CMDB25/3/R CMDB25/3/BU CMDB25/3/BL Cat. No. CMDB25/4 CMDB25/4/R CMDB25/4/BU CMDB25/4/BL Cat. No. CMDB25/10 CMDB25/10/R CMDB25/10/BU CMDB25/10/BL Cat. No. Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. 10 10 10 10 Std. Pk. DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tag MT6 1 Pk. (100 tags) MT10 1 Pk. (100 tags) MT12 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS CXDB35/10 DISTRIBUTION SPRING TERMINAL BLOCKS CXDB35/10A HIGHLIGHTS with Allen Screw 1 Flat Head Screw Input 4 Spring Clamp Outputs 1 Hex Screw Input 4 Spring Clamp Outputs Width 16 mm 16 mm Length 81.6 mm 81.6 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 46.8 mm 54.3 mm 46.8 mm 54.3 mm 53.2 g 53.2 g Dimensions & Weight Weight per piece CB SCHEME 60947-7-1 E220514 60947-7-1 600 V 1000V AC/DC 600 V 1000V AC/DC Insulation Material Polyamide 66 (4 x41A) • Modular system • Standard slot & hex screw versions • Expandable with standard CX Series APPLICATIONS • Miniature Circuit Breaker (MCB) E220514 Voltage Rating Terminal Block • Screw input (115A) • 4 spring clamp outputs jumpers and terminal blocks • Easy Installation General Specifications Approvals FEATURES • Hybrid Distribution distribution • Limited space distribution Polyamide 66 Output Expansion CXDB35/10A INPUT Technical Data/Ratings Wire Size (solid / stranded) 14-2 AWG 1.5-35 mm2 14-2 AWG 1.5-35 mm2 Current Rating 115 A 125 A 115 A 125 A Torque 25 lb-in 2.5 Nm 25 lb-in 2.5 Nm Installation Instructions Terminal Blocks (see page 64) Wire Stripping Length Screwdriver 2 x CX6 17 mm 17 mm Flat Head 1.0 x 5.5 mm Hex Screw M5 JX6/3 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 24-8 AWG 0.2-10 mm2 24-8 AWG 0.2-10 mm2 41 A 41 A 41 A 41 A Current Rating MCB Distribution Example Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Grey Accessories 15 mm 15 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Cat. No. CXDB35/10 Cat. No. Std. Pk. 20 Std. Pk. Cat. No. CXDB35/10A Cat. No. Std. Pk. 20 Std. Pk. DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Clamp CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 Jumpers JX6/2 JX6/3 JX6/4 JX6/10 100 50 50 10 JX6/2 JX6/3 JX6/4 JX6/10 100 50 50 10 Marking Tag MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 35 DISTRIBUTION GROUNDING NEUTRAL CLAMPS GROUNDING SYSTEM CENC4 CENC35 CENC16 HIGHLIGHTS FEATURES • 3 Clamp Sizes • Panel Mount •NES •NEB6 • DIN Rail Mount •CA202 •NEB10 • Tin Plated Copper Busbars • Busbar Current rating 140A Standard Color: Green Dimensions & Weight Width 7.5 mm 9.8 mm 14.5 mm Length 23.3 mm 23.3 mm 27.3 mm 8g 10.5 g 20 g Weight per piece Technical Data/Ratings Approvals E220514 CB SCHEME • Various colors Wire Size (solid / stranded) APPLICATIONS • Grounding Solution • Terminating Neutral an Torque • Voltage Rating 60947-7-2 E220514 60947-7-2 E220514 60947-7-2 22-12 AWG 22-12 AWG 0.2-6 mm2 10-6 AWG 10-6 AWG 10-16 mm2 8-2 AWG 8-2 AWG 10-35 mm2 600 V Current Rating Grounding Wires to a single busbar Distribution Applications 600 V 800 V 600 V 600 V 800 V 600 V 800 V - - 37 A - - 76 A - - 125 A 14 lb-in 14 lb-in 0.8 Nm 17.5 lb-in 17.5 lb-in 2.0 Nm 25 lb-in 25 lb-in 2.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 12 mm 16 mm 16 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Green (standard) Black BL Blue BU Grey GR Yellow Y Std. Pk. CENC4 CENC4/BL CENC4/BU CENC4/GR CENC4/Y Mounting Accessories Panel Mount Cat. No. 50 50 50 50 50 Std. Pk. Cat. No. Std. Pk. CENC16 CENC16/BL CENC16/BU CENC16/GR CENC16/Y 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. CENC35 CENC35/BL CENC35/BU CENC35/GR CENC35/Y 50 50 50 50 50 Cat. No. Std. Pk. Busbar (6 x 6 mm) NEB6 1m NEB6 1m NEB6 1m Plastic Support with Fixing Screw NES 50 NES 50 NES 50 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Mounting Accessories DIN Rail Mount Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Busbar (10 x 3 mm) NEB10 1m NEB10 1m NEB10 1m End Clamp/Busbar support for rail mounting CA202 50 CA202 50 CA202 50 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Panel Mount DIN Rail Mount Assembly Example Assembly Example CENC16 NEB10 Busbar CENC4 CENC16 NEB6 Busbar NES Plastic Support 36 600 V CA202 Mounting Support Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 HIGH VOLTAGE HIGH VOLTAGE TERMINAL BLOCKS SCREW TERMINAL BLOCKS CHV4U CHV6U CHV10U HIGHLIGHTS FEATURES • High Voltage Terminal Blocks Dimensions & Weight Width 6 mm 8 mm 10 mm Length 52 mm 52 mm 52 mm 63.4 mm 70.8 mm 63.4 mm 70.8 mm 63.4 mm 70.8 mm 11.0 g 16.0 g 21.6 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece • 1000V UL Rating • 1500V IEC DC Rating • Same Profile on all Current Ratings Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 22-10 AWG 0.2-4 mm 22-8 AWG 0.2-6 mm 20-6 AWG 0.2-10 mm2 1000 V 1500 V AC/DC 1000 V 1500 V AC/DC 1000 V 1500 V AC/DC Voltage Rating 2 2 Current Rating 35 A 32 A 50 A 41 A 65 A 57 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 12 mm 14 mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm APPLICATIONS • Solar Applications • High Voltage Applications Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CHV4U CHV4U/R CHV4U/BU CHV4U/BL CHV4U/O CHV4U/G CHV4U/Y CHV4U/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CHV6U CHV6U/R CHV6U/BU CHV6U/BL CHV6U/O CHV6U/G CHV6U/Y CHV6U/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CHV10U CHV10U/R CHV10U/BU CHV10U/BL CHV10U/O CHV10U/G CHV10U/Y CHV10U/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPUSC 50 EPUSC 50 EPUSC 50 Separator Plate SP2.5/4UN 50 SP2.5/4UN 50 SP2.5/4UN 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA702 CA802 CA202 50 50 25 CA623/2 CA623/3 CA623/4 CA623/10 100 100 100 10 CA624/2 CA624/3 CA624/4 CA624/10 100 100 100 10 CA625/2 CA625/3 CA625/4 CA625/10 100 100 100 10 Internal Jumper Marking Tag 2 pole 3 pole 4 pole 10 pole 100 pole MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT10 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 37 THERMOCOUPLE THERMOCOUPLE BLOCKS SCREW TERMINAL BLOCKS CTT2.5UK/J/T/E HIGHLIGHTS FEATURES • Thermocouple terminal • • • blocks are used to extend thermocouple compensating lines in measuring circuits The current bar of the terminal block is made of the same material as the thermocouple wire (As per EN 60584/DINEN 60584) No loss of potential at the connection points Available types: K Type - Chromel (NiCr), Alumel (Ni) J Type - Iron (Fe), Constantan (CuNi) T Type - Copper (Cu), Constantan (CuNi) E Type - Chromel (NiCr), Constantan (CuNi) APPLICATIONS • Measurement applications CTT2.5UX Dimensions & Weight Width 10 mm Length 43 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 46.2 mm 53.7 mm Weight per piece 12.4 g Technical Data/Ratings Approvals 60947-7-1 CB SCHEME Wire Size (solid / stranded) 22-14 AWG 0.2-2.5 mm2 Voltage Rating 1000 V AC/DC Current Rating 10 A Torque 7 lb-in / 0.4 Nm Insulation Material Polyamide 66 Installation Instructions Wire Stripping Length 8 mm Screwdriver Flat Head 0.5 x 3 mm Terminal Blocks Grey U Type J Type T Type G Type Accessories Cat. No. Std. Pk. CTT2.5UK CTT2.5UJ CTT2.5UT CTT2.5UG 50 50 50 50 Cat. No. Std. Pk. End Plate EP2.5/4UN 50 Partition Plate PP2.5/4UN 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 100 100 Marking Tag INCLUDED Typical Temperature Measuring Circuit Thermocouple Terminal Block Compensating Cable Supply Cable Thermocouple (Sensor) Measuring Instrument Thermocouple Terminal Block 38 Reference Junction Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 TAB CONNECTION TERMINAL BLOCKS TAB CONNECTION SCREW TERMINAL BLOCKS CTC4U HIGHLIGHTS FEATURES • Standard tab connection terminals Dimensions & Weight Width 6 mm Length 47 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm • Quick-Connect Tabs 51.2 mm 58.8 mm Weight per piece APPLICATIONS • Transportation • Railroad Applications 8.0 g Technical Data/Ratings Approvals 60947-7-1 CB SCHEME Wire Size (solid | stranded) 0.2-4.0 mm2 | 24-12 AWG Voltage Rating 300 V Current Rating 32 A Tab (Blade) Size 6.3 x 0.8 mm Insulation Material Polyamide 66 Installation Instructions Wire Stripping Length Terminal Blocks Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Accessories 9 mm Cat. No. CTC4U CTC4U/R CTC4U/BU CTC4U/BL CTC4U/O CTC4U/G CTC4U/Y CTC4U/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. End Plate EPCTC4U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 100 100 Test Socket CA707/TS/01 Marking Tag MT6 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 39 SPRING LOADED FEED-THROUGH TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS6USC CTS4USC CTS10USC HIGHLIGHTS FEATURES • Feed Through Terminals with Springs below clamps • High torque screws • Built-in springs guarantee • • • • secure connection even when screw is not tight 4 mm, 6 mm, 10mm terminal blocks with same size profile It is recommended to use hook type lugs/ ferrules for wire termination Both, high-torque screws and built-in spring Various disconnect terminals APPLICATIONS • Vibration Applications • Projects which follow the following safety regulations: • Electric Supply Standard (ESI) • British CEGB Standard • NTPC standard Feed Through Terminal Spring Loaded Feed Through Terminal Spring Loaded Width 6 mm 8 mm 10 mm Length 52 mm 52 mm 52 mm 63.4 mm 70.8 mm 63.4 mm 70.8 mm 63.4 mm 70.8 mm 13.0 g 10.0 g 12.6 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 22-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 20-6 AWG 0.2-10 mm2 600 V 1500V AC/DC 1000 V 1500V AC/DC 1000 V 1500V AC/DC Voltage Rating Current Rating 35 A 32 A 50 A 41 A 65 A 57 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 12 mm 14 mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CTS4USC CTS4USC/R CTS4USC/BU CTS4USC/BL CTS4USC/O CTS4USC/G CTS4USC/Y CTS4USC/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CTS6USC CTS6USC/R CTS6USC/BU CTS6USC/BL CTS6USC/O CTS6USC/G CTS6USC/Y CTS6USC/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CTS10USC CTS10USC/R CTS10USC/BU CTS10USC/BL CTS10USC/O CTS10USC/G CTS10USC/Y CTS10USC/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPUSC 50 EPUSC 50 EPUSC 50 Separator Plate SP2.5/4UN 50 SP2.5/4UN 50 SP2.5/4UN 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 CA604/1 CA604/2 CA604/5 – – 100 100 100 – – CA604/1 CA604/2 CA604/5 CA604/4 – 100 100 100 100 – CA604/1 CA604/2 CA604/5 CA604/4 CA604/3 100 100 100 100 100 2 pole 3 pole 4 pole 10 pole CA623/2 CA623/3 CA623/4 CA623/10 100 100 100 10 CA624/2 CA624/3 CA624/4 CA624/10 MT8 Hook Type Lug / Ferrule Pre Assembled Jumpers Marking Tag 40 Feed Through Terminal Spring Loaded Dimensions & Weight MT6 1 Pk. (100 tags) 100 100 100 10 1 Pk. (100 tags) CA625/2 CA625/3 CA625/4 CA625/10 MT10 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 100 100 100 10 1 Pk. (100 tags) SPRING LOADED DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDS6U/SC CKT4SPSC Knife Disconnect Spring Loaded Terminal Dimensions & Weight CDTTUSC Slider Disconnect Spring Loaded Terminal CDTTUFTSC Slider Disconnect Spring Loaded Terminal Feed Through Terminal Same profile as CDTTUSC Width 6 mm 8 mm 8 mm 8 mm Length 58.5 mm 82 mm 63 mm 63 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 46.0 mm 53.5 mm 51.0 mm 59.2 mm 58.7 mm 65.7 mm 58.7 mm 65.7 mm 14.1 g 30.9 g 31.0 g 25.4 g Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 24-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 16-8 AWG 1.5-10 mm2 16-8 AWG 1.5-10 mm2 600 V 1000V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Voltage Rating Current Rating Torque 30 A 28 A 45 A 41 A 41 A 57 A 41 A 57 A 4.5 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 8 mm 10 mm 12 mm 12 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CKT4SPSC CKT4SPSC/R CKT4SPSC/BU CKT4SPSC/BL CKT4SPSC/O CKT4SPSC/G CKT4SPSC/Y CKT4SPSC/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CDS6U/SC CDS6U/SC/R CDS6U/SC/BU CDS6U/SC/BL CDS6U/SC/O CDS6U/SC/G CDS6U/SC/Y CDS6U/SC/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CDTTUSC CDTTUSC/R CDTTUSC/BU CDTTUSC/BL CDTTUSC/O CDTTUSC/G CDTTUSC/Y CDTTUSC/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. CDTTUFTSC CDTTUFTSC/R CDTTUFTSC/BU CDTTUFTSC/BL CDTTUFTSC/O CDTTUFTSC/G CDTTUFTSC/Y CDTTUFTSC/W 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate – – EPCDS6U 50 EPCDTTU 50 EPCDTTU 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 100 50 50 10 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Cat. No. Pre Assembled Jumpers 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 100 100 10 10 CA723/2 CA723/3 CA723/4 CA723/10 – Insulated Jumpers 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 100 100 10 10 – – – – – – – – – – – – – – – External Jumpers 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 – – – – – – – – CA710/2 CA710/3 CA710/4 CA710/10 100 50 50 20 CA710/2 CA710/3 CA710/4 CA710/10 – – – QJ8/2 25 – Shorting Plug – Marking Tag MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 100 50 50 20 – 1 Pk. (100 tags) 41 ELECTRONIC COMPONENTS DIODE CIRCUIT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)D1/D2 CDL4U(E)D3 CDL4U(E)DD1/DD2 HIGHLIGHTS FEATURES • Various configurations of • • • • Electronic components soldered into CDL4U double level terminal block Various Diode / Resistor combinations 4 connection points for convenient wiring Terminal Block with open current bar CDL4U(O) can be individually soldered with electronic components Spacer CDL4USP can be used to cover overlapping components when soldered individually APPLICATIONS • Reverse polarity protection • Lamp testing 1 2 1 3 4 1 2 3 +4 CDL4U(E)DD1 CDL4U(E)D1 1 2 3 3 1 4 2 CDL4U(E)D3 4 3 -4 CDL4U(E)D2 Dimensions & Weight 2 CDL4U(E)DD2 Arc Suppression circuit diode for contactors and solenoid valves Diode reverse polarity protection Diode circuit for lamp testing Width 6 mm 6 mm 6 mm Length 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 13.6 g 13.4 g 13.4 g Weight per piece Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) E220514 60947-7-1 22-10 AWG 0.2-4 mm2 E220514 60947-7-1 22-10 AWG 0.2-4 mm2 E220514 60947-7-1 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A Torque 7 lb-in Insulation Material 0.5 Nm 7 lb-in Polyamide 66 0.5 Nm 7 lb-in Polyamide 66 0.5 Nm Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A - - - 9 mm 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Diode Reverse Voltage / Current Indicator Voltage Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey CDL4U(E)D1 CDL4U(E)D2 Spacer to cover electronic components which stick out of CDL4U(O) Cat. No. CDL4USP 42 Std. Pk. 100 100 Cat. No. CDL4U(E)D3 Std. Pk. 100 Cat. No. CDL4U(E)DD1 CDL4U(E)DD2 Std. Pk. 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 Accessories CDL4U SPACER Std. Pk. Internal Jumper Marking Tag 2 pole 3 pole 4 pole 10 pole MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 1 Pk. (100 tags) ELECTRONIC COMPONENTS DIODE CIRCUIT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)DD3/DD4 1 CDL4U(E)D4 CDL4U(E)DD5 2 +3 +4 1 1 2 2 CDL4U(E)DD3 1 2 3 3 +4 CDL4U(E)D4 +3 +4 CDL4U(E)DD5 +4 CDL4U(E)DD4 Diode circuit for lamp testing Dimensions & Weight Diode circuit for lamp testing with LED series resistance Diode circuit for lamp testing with LED series resistance Width 6 mm 6 mm 6 mm Length 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 13.6 g 13.6 g 13.6 g Weight per piece Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) E220514 60947-7-1 22-10 AWG 0.2-4 mm2 E220514 60947-7-1 22-10 AWG 0.2-4 mm2 E220514 60947-7-1 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A Torque 7 lb-in Insulation Material 0.5 Nm 7 lb-in Polyamide 66 0.5 Nm 7 lb-in Polyamide 66 0.5 Nm Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A - - - 9 mm 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Diode Reverse Voltage / Current Indicator Voltage Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey CDL4U(E)DD3 CDL4U(E)DD4 Accessories Std. Pk. 100 100 Cat. No. Std. Pk. CDL4U(E)D4/12V CDL4U(E)D4/24V 100 100 Cat. No. Std. Pk. CDL4U(E)DD5/12V CDL4U(E)DD5/24V 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 Internal Jumper Marking Tag 2 pole 3 pole 4 pole 10 pole MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 Std. Pk. 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 43 ELECTRONIC COMPONENTS INDICATOR TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)N1 CDL4U(E)LD5 CDL4U(E)LD3 HIGHLIGHTS FEATURES • Various configurations of • • • • • • • Electronic components soldered into CDL4U double level terminal block Various Indicator options AC voltage indicator DC voltage indicator LED and Neon lamp versions 4 connection points for convenient wiring Terminal Block with open current bar CDL4U(O) can be individually soldered with electronic components Spacer CDL4USP can be used to cover overlapping components when soldered individually APPLICATIONS • AC voltage indication • DC voltage indication 1 2 +1 1 3 4 3 4 3 CDL4U(E)N1 CDL4U(E)LD5 -4 CDL4U(E)LD3 AC Voltage indicator with Neon lamp AC Voltage indicator with LED AC Voltage indicator with LED Width 6 mm 6 mm 6 mm Length 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 13.6 g 12.4 g 12.4 g Dimensions & Weight Weight per piece Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) E220514 60947-7-1 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 300 V Current Rating 35 A 25 A Torque 60947-7-1 22-10 AWG 0.2-4 mm2 500 V AC 600 V 300 V 32 A 35 A 25 A 7 lb-in Insulation Material E220514 0.5 Nm 60947-7-1 22-10 AWG 0.2-4 mm2 500 V AC 600 V 300 V 32 A 35 A 25 A 7 lb-in Polyamide 66 E220514 0.5 Nm 500 V AC 32 A 7 lb-in 0.5 Nm Polyamide 66 Polyamide 66 1N 4007 1N 4007 Electronic Component Specifications Diode Type 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage 110, 220 VAC 24, 48, 110, 220 VAC 12, 24 VAC Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Cat. No. Grey Std. Pk. CDL4U(E)N1/110V CDL4U(E)N1/220V Accessories 100 100 Cat. No. Std. Pk. CDL4U(E)LD5/24V CDL4U(E)LD5/48V CDL4U(E)LD5/110V CDL4U(E)LD5/220V 100 100 100 100 Cat. No. Std. Pk. CDL4U(E)LD3/12V CDL4U(E)LD3/24V 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 Internal Jumper Marking Tag 44 9 mm Flat Head 0.6 x 3.5 mm 2 pole 3 pole 4 pole 10 pole MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 1 Pk. (100 tags) ELECTRONIC COMPONENTS INDICATOR TERMINAL BLOCKS CDL4U(E)LD1/LD2 SCREW TERMINAL BLOCKS CDL4U(E)LD4 CDL4U(O) CDL4U(E)L1/L2 +1 +1 -3 -1 +4 -3 CDL4U(E)LD1 -4 CDL4U(E)L1 +3 -1 +3 +1 +4 CDL4U(E)LD4 +4 -3 CDL4U(E)LD2 CDL4U(O) -4 CDL4U(E)L2 DC Voltage Indicator with LED AC Voltage indicator with LED DC Voltage Indicator with LED Terminal Block with open current to solder custom components Width 6 mm 6 mm 6 mm 6 mm Length 55.5 mm 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 12.4 g 12.4 g 12.4 g 13.0 g Dimensions & Weight Weight per piece Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) E220514 60947-7-1 22-10 AWG 0.2-4 mm2 E220514 60947-7-1 22-10 AWG 0.2-4 mm2 E220514 60947-7-1 22-10 AWG 0.2-4 mm2 E220514 60947-7-1 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 35 A 32 A Torque 7 lb-in Insulation Material 0.5 Nm 7 lb-in Polyamide 66 7 lb-in 0.5 Nm 0.5 Nm 7 lb-in 0.5 Nm Polyamide 66 Polyamide 66 Polyamide 66 1N 4007 1N 4007 1N 4007 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage 12, 24 VAC 24, 48 VAC 6, 24 VAC - 9 mm 9 mm 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Electronic Component Specifications Diode Type Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey Std. Pk. CDL4U(E)LD1/12V CDL4U(E)LD1/24V CDL4U(E)LD2/12V CDL4U(E)LD2/24V Accessories 100 100 100 100 Cat. No. Std. Pk. CDL4U(E)LD4/24V CDL4U(E)LD4/48V 100 100 Std. Pk. CDL4U(E)L1/6V CDL4U(E)L1/24V CDL4U(E)L2/6V CDL4U(E)L2/24V Cat. No. 100 100 100 100 CDL4U(O) Cat. No. Std. Pk. Cat. No. Std. Pk. 100 Cat. No. Std. Pk. Cat. No. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 Internal Jumper Marking Tag 2 pole 3 pole 4 pole 10 pole MT2 1 Pk. (100 tags) MT2 Std. Pk. Cat. No. 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 1 Pk. (100 tags) 45 ELECTRONIC COMPONENTS SURGE SUPPRESSOR TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)LA CDL4U(E)3LA CDL4U(E)RC CDL4U(E)3LA CDL4U(E)RC HIGHLIGHTS FEATURES • Various solutions to protect single lines against surges • Lightning Arrestors (CDL4U(E)LA) • MOVs (CDL4U(E)MOV) • RC Circuits (CDL4U(E)RC) • Suppressor Diode (CDL4U(E)SD) CDL4U(E)LA CB SCHEME Lightning Arrestor to protect data and signal lines 3 pole lightning arrestor to protect line / line and line / earth surges RC circuit to protect DC solenoid valves and contactors Dimensions & Weight APPLICATIONS • Surge suppressor Width 18 mm 18 mm 18 mm Length 55.5 mm 55.5 mm 55.5 mm • Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm 30.0 g 34.2 g 22.4 g applications Equipment protection Weight per piece Technical Data/Ratings / Component Specifications Wire Size (solid / stranded) Insulation Material 22-10 AWG 22-10 AWG 22-10 AWG Polyamide 66 Polyamide 66 Polyamide 66 10 A 5A - - - 2kA-6.5kA (8/20ms) 20 KA (8/20ms) 10 KA (8/20ms) - 100 ns 100 ns < 25 ns Nominal Current Peak Current Nominal Discharge Current Response Time Capacitance Voltage Rating < 1.5 pf < 1.0 pf 100 - 20,000 pf 75, 90, 230, 600, 1000 V DC 90, 230, 350, 600 V DC 30, 60, 75, 130, 275, 460, 510, 625, 680 V AC 9 mm 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Grey Std. Pk. CDL4U(E)LA/75V CDL4U(E)LA/90V CDL4U(E)LA/230V CDL4U(E)LA/600V CDL4U(E)LA/1000V 20 20 20 20 20 Cat. No. Std. Pk. CDL4U(E)3LA/90V CDL4U(E)3LA/230V CDL4U(E)3LA/350V CDL4U(E)3LA/600V 20 20 20 20 Cat. No. Std. Pk. 0.1 mF CDL4U(E)RC0.1 10 0.22 mF CDL4U(E)RC0.22 10 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tag MT2 Accessories 46 Cat. No. 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 1 Pk. (100 tags) ELECTRONIC COMPONENTS SURGE SUPPRESSOR TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTLG2.5(E)MOV CDL4U(E)MOV CDL4U(E)SD SDUA CDL4U(E)MOV SDUK CTLG2.5(E)MOV SDB MOV for voltage surge spike protection MOV for voltage surge spike protection Suppressor Diode to fine protect sensors, contacts, etc Width 12 mm 6 mm 12 mm Length 55.5 mm 87.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 55.7 mm 63.1 mm 66.0 mm 74.0 mm 55.7 mm 63.1 mm 19.2 g 14.8 g 18.0 g CB SCHEME Dimensions & Weight Weight per piece Technical Data/Ratings / Component Specifications Wire Size (solid / stranded) 22-10 AWG 22-10 AWG 22-10 AWG Polyamide 66 Polyamide 66 Polyamide 66 - 5A - 2kA-6.5kA (8/20ms) 2kA-6.5kA (8/20ms) - - 10 KA (8/20ms) 1.5 KA 1 ns (D.C) / 5 ns (A.C) Insulation Material Nominal Current Peak Current Nominal Discharge Current Response Time < 25 ns < 25 ns 100 - 20,000 pf 100 - 20,000 pf - 30, 60, 75, 130, 275, 460, 510, 625, 680 V AC Up to 275V 30, 60, 75, 130, 275, 460, 510, 625, 680 V AC Capacitance Voltage Rating Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Grey 9 mm 9 mm 9 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Cat. No. Std. Pk. CDL4U(E)MOV30V CDL4U(E)MOV60V CDL4U(E)MOV75V CDL4U(E)MOV130V CDL4U(E)MOV275V CDL4U(E)MOV460V CDL4U(E)MOV510V CDL4U(E)MOV625V CDL4U(E)MOV680V 20 20 20 20 20 20 20 20 20 Cat. No. Std. Pk. CTLG2.5(E)MOV30V CTLG2.5(E)MOV60V CTLG2.5(E)MOV75V CTLG2.5(E)MOV130V CTLG2.5(E)MOV275V 20 20 20 20 20 Cat. No. Std. Pk. DC - Anode CDL4U(E)SDUA12VDC 20 CDL4U(E)SDUA24VDC 20 CDL4U(E)SDUA48VDC 20 DC - Cathode CDL4U(E)SDUK12VDC 20 CDL4U(E)SDUK24VDC 20 CDL4U(E)SDUK48VDC 20 AC CDL4U(E)SDB12VAC CDL4U(E)SDB24VAC CDL4U(E)SDB48VAC CDL4U(E)SDB160VAC Std. Pk. Cat. No. Std. Pk. EPCTLG2.5 50 EPCDL4U 50 50 – – CDL4USP 50 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tag MT2 Accessories Cat. No. Std. Pk. End Plate EPCDL4U 50 Spacer CDL4USP DIN Rail 1 Pk. (100 tags) Cat. No. MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 47 ACCESSORIES JUMPER / SHORTING LINKS SCREW TERMINAL BLOCKS Internal Jumper CTS2.5U-N CTS4U-N, CCC4U, CMC1-2, CMC2-2, CDL4UN, CDL4U(I.S) CDLG4, CDLG(I.S), CF4SP, CF4SP(L), CKT4U1, CKT4SP CTS6U, CDS6U CDTTU1, CDTTU-SH1 CTS10U CTS16U CTS25UN CTS35UN CTS50/70N CTS95/120N CTL2.5U, CTL2.5U(L) CTL2.5U-H, CTL2.5U-H(L) CTL2.5U(I.S) ODL4U CDL4U(E) CMT4 CMB4 CDLG2.5 CTLG2.5 CF4U1 CF4U(L)1 DDFL4U, DDFL4U(E) DDFL4ULR, DDFL4ULR(E) CSDL4U1, DDDL4U CAFL4U1 CAFL4U(L)1 CAFL4U(N)1 CHV4U CTS4USC CHV6U CTS6USC CHV10U CTS10USC 48 Poles 2 Pole 3 Pole 4 Pole 10 Pole 100 Pole 2 Pole 3 Pole 4 Pole 10 Pole 100 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 2 Pole 3 Pole 2 Pole 3 Pole 4 Pole 10 Pole 100 Pole2 2 Pole 3 Pole 4 Pole 10 Pole 100 Pole2 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole Cat. No. CA721/2 CA721/3 CA721/4 CA721/10 CA721/100 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA723/2 CA723/3 CA723/4 CA723/10 CA724/2 CA724/3 CA724/4 CA724/10 CA751/2 CA751/3 CA751/4 CA751/10 CA725/2 CA725/3 CA725/4 CA725/10 CA771/2 CA771/3 CA771/4 CA771/10 CA628/2 CA628/3 CA629/2 CA629/3 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA727/2 CA727/3 CA727/4 CA727/10 CA727/100 CA627/2 CA627/3 CA627/4 CA627/10 CA729/2 CA729/3 CA729/4 CA729/10 CA623/2 CA623/3 CA623/4 CA623/10 CA624/2 CA624/3 CA624/4 CA624/10 CA625/2 CA625/3 CA625/4 CA625/10 Std. Pk. 100 100 100 10 10 100 100 100 10 10 100 50 50 10 100 50 50 10 50 50 50 10 50 20 20 10 50 20 20 10 10 10 10 10 100 100 100 10 10 100 100 100 10 10 100 100 100 10 100 50 50 10 100 100 100 10 100 100 100 10 100 100 100 10 Insulated Internal Jumper Cat. No. CA741/2 CA741/3 CA741/4 CA741/10 CA741/100 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 CA743/2 CA743/3 CA743/4 CA743/10 CA744/2 CA744/3 CA744/4 CA744/10 CA761/2 CA761/3 CA761/4 CA761/10 CA745/2 CA745/3 CA745/4 CA745/10 CA781/2 CA781/3 CA781/4 CA781/10 CA747/2 CA747/3 CA747/4 CA747/10 CA747/100 CA749/2 CA749/3 CA749/4 CA749/10 - Std. Pk. 100 100 100 10 10 100 100 100 10 10 100 50 50 10 100 50 50 10 50 50 50 10 50 20 20 10 50 20 20 10 100 100 100 10 10 100 50 50 10 - External Jumper Current Bar Shorting Sleeve & Screws Cat. No. CA717/2 CA717/3 CA717/4 CA717/10 CA714/2 CA714/3 CA714/4 CA714/10 CA710/2 CA710/3 CA710/4 CA710/10 CA718/2 CA718/3 CA718/4 CA718/10 CA715/2 CA715/3 CA715/4 CA715/10 CA714/2 CA714/3 CA714/4 CA714/10 CA715/2 CA715/3 CA715/4 CA715/10 CA711/2 CA711/3 CA711/4 CA711/10 CA711/2 CA711/3 CA711/4 CA711/10 CA716/2 CA716/3 CA716/4 CA716/10 - Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. 100 CA703/01 100 100 CA704/01 100 100 CA705/01 100 CA707/S/Q/01 100 20 CA731/10 100 CA731/100 10 100 CA703/1 100 100 CA704/1 100 100 CA705/1 100 CA707/S/Q/01 100 20 CA732/10 100 CA732/100 10 100 CA703/2 100 50 CA704/2 100 CA707/S/Q/1 100 50 CA705/2 100 20 CA733/10 10 100 CA703/3 100 50 CA704/3 100 CA707/S/Q/1 100 50 CA705/3 100 20 CA734/10 10 CA703/8 100 CA704/8 100 CA707/S/Q/1 100 CA705/8 100 CA739/10 10 CA703/4 100 CA704/4 100 CA707/S/Q/2 100 CA705/4 100 CA735/10 100 CA703/10 100 CA704/10 100 CA707/S/Q/2 100 CA705/10 100 CA770/10 10 100 CA703/1 100 100 CA704/1 100 100 CA705/1 100 CA707/S/Q/01 100 20 CA732/10 100 CA732/100 10 100 CA703/1 100 100 CA704/1 100 100 CA705/1 100 CA607/S/Q 100 20 CA732/10 100 CA732/100 10 100 CA703/1 100 100 CA704/1 100 CA611/S/Q 100 100 CA705/1 100 20 CA732/10 10 100 50 50 20 100 CA703/6 100 50 CA704/6 100 CA707/S/Q/3 100 50 CA705/6 100 20 CA737/10 100 50 50 50 20 1 Internal shorting system not available. 2 - is breakable - poles needed. 100 pole strip into any -number of - Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 ACCESSORIES VARIOUS ACCESSORIES SCREW TERMINAL BLOCKS ENDPLATES Terminal Block PARTITION PLATES Cat. No. CTS2.5U-N, CTS4U-N CTT2.5UK/J/T/E CCTS6U, CTS10U CMC1-2 CMC2-2, CMCG4 CDL4UN, CDLG4 CDLG2.5 CTLG2.5 ODL4U CHV Series, CTSUSC Series CTL2.5U Series CTL2.5U-H Series CAFL4U Series CDS6U CKT4U EPCKT4U CDTTU Series CSDL4U DDDL4U, DDFL4U CDL4U(E) CTC4U CMT4 CMB4 ODL2.5 Series Dimensions EP2.5/4UN EP6/10U EPCMC1-2 EPCMC2-2 EPCDL4UN EPCDLG2.5 EPCTLG2.5 EPODL4U (Front) EP1ODL4U (Back) EPUSC EPCTL2.5U EPCTL2.5U-H EPCAFL4U EPCDS6U EPCKT4U EPCKT4U/4 EPCDTTU EPCSFL4U EPDDFL4U EPCDL4U EPCTC4U EPCMT4 EPCMB4 EPODL2.5 EP1ODL2.5 Std. Pk. 32 x 39 x 1.5mm 50 31 x 42.5 x 1.5mm 35.5 x 46.5 x 2.5mm 40.5 x 65 x 2.5mm 47.5 x 57 x 1.5mm 48 x 71.4 x 1.2mm 62.5 x 87.5 x 1.2mm 49 x 86 x 5.5mm 24 x 68 x 3mm 52 x 48.5 x 1.5mm 55.5 x 84 x 1.5mm 55.5 x 61 x 1.5mm 32 x 72 x 1.5mm 37.2 x 82 x 1.5mm 30.5 x 46.5 x 2.5mm 65 x 38.3 x 1.5mm 41 x 63 x 3mm 28 x 55.5 x 1.6mm 49 x 87.6 x 3mm 43 x 55 x 2.4mm 34.5 x 47 x 2.5mm 23 x 27 x 1.5mm 27 x 27 x 7mm 49 x 59 x 4.6mm 23 x 59 x 2.5mm 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Terminal Block CTS2.5U-N, CTS4U-N CTT2.5UK/J/T/E CTS6U, CTS10U CTS25UN CTS35UN CMT4 Cat. No. PP2.5/4UN Dimensions Std. Pk. 37 x 44 x 1.6mm 50 37.5 x 56 x 1.5mm 42.5 x 62 x 1mm 50 x 64.5 x 1mm 32 x 37 x 1.6mm 50 50 50 50 Dimensions Std. Pk. SP2.5/4UN 17.5 x 17.4 x 1.4mm 100 SP6/10U SPCDL4U SPCMB4 SPCDLG2.5 15.4 x 16.2 x 1.5mm 15.4 x 16.2 x 1.6mm 14.5 x 12 x 1.5mm 11 x 10.5 x 1 100 100 100 100 PP6/10U PP25UN PP35UN PPCMT4 SEPARATOR PLATES Terminal Block CTS2.5U-N, CTS4U-N CTT2.5UK/J/T/E CTS6U, CTS10U, CTS16U CSL4UN, CDL4UN(I.S.) CBM4 CDLG2.5 Cat. No. END STOPS CA802 CA202 Cat. No. CA202 Dimensions Std. Pk. 44.5 x 50 x 9.5mm 50 Cat. No. CA802 Dimensions 45 x 32 x 8mm CA702 Std. Pk. 50 Cat. No. CA702 Dimensions 34 x 45 x 9mm CA102 Std. Pk. 50 Cat. No. CA102 Dimensions 80 x 46 x 9mm Std. Pk. 50 PROTECTIVE COVER CTSPC COVER SUPPORT PLATE Length Cat. No. CTSPC/40 CTSPC/90 CTSPC/100 CTSPC/130 CTSPC/150 CTSPC/200 CTSPC/300 CTSPC/330 Length 40mm 90mm 100mm 130mm 150mm 200mm 300mm 330mm Std. Pk. 2 2 2 2 2 2 2 2 Cat. No. CSP1 Std. Pk. 50 Assembled Block installed with Protective Cover Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 49 OVERVIEW INTRODUCTION LUG TYPE TERMINALS LUG/ STUD TYPE CONNECTION TECHNOLOGY • Accepts Ring/ Fork Lug Cable Lugs • Withstands severe vibration • Reliable Gas-tight connection • For very large wire sizes (up to 350 kcmil) • High Torque values • Secure connection • Hinged cover featuring captive nut system guarantees quick and easy ring lug wiring E220514 60947-7-1 MATERIAL SPECIFICATIONS Current Carrying Metal Housing Corrosion free material Stud/ Bolt Nut • Bolt: zinc chromate Current Bar Terminal Block Housing • Polyamide PA66 Housing • Self-extinguishing • High mechanical strength passivated steel • Nut/ Screw: zinc chromate passivated steel • Current Bar: nickel plated copper alloy/ tin plated copper Polyamide 66 Specifications Upper Temperature Limit: 105°C Lower Temperature Limit: -50°C Flammability UL94: V2/ V0 Volume Resistivity: 1012 Ω cm Surface Resistivity: 1010 Ω INSTALLATION GUIDELINES Secure Connection 1 Remove screw/ nut by using wrench/ hex nut driver 2 Place cable with ring/ fork cable lug on stud 3 Tighten screw/ nut to specified torque by using wrench/hex nut driver 1 2 3 RING LUG TERMINAL CONNECTION TYPES AND FEATURES Slotted Hex Nut Terminal & ect s l onn Disc Termina Test Phillips Screw Terminal Large Center Marking Area Hex Nut Power Terminal Hex Nut Terminal 50 Hinge Type Captive Nut Terminal Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 OVERVIEW SELECTION GUIDE STUD / RING LUG TERMINALS Phillips Screw Ring Lug Barrier Terminal Blocks FEATURES • Phillips Screw (CBS Series) • Slotted Hex Nut (CSB Series) • 22-4 AWG • Up to 85A CSB Series page 53 CBS Series page 52 Hex Nut Ring Lug Stud Terminal Blocks FEATURES • Hex Nut (CSTSN Series) • Slotted Hex Nut (CSTSB Series) • 22-2 AWG • Up to 125A Slotted Hex Nut Slotted Hex Nut CSTSB Series page 55 CSTSN Series page 54 Ring Lug Hinge Terminal Blocks FEATURES • Captive Nut Built-In Hinge • Feed-Through Terminals • Disconnect Terminals • 22-2 AWG • Up to 115A Captive Nut Feed-Through page 56 Disconnect page 57 Ring Lug Power Terminal Blocks FEATURES • Nut/Bolt Connection • Threaded Current Bar • 10 AWG - 350 kcmil • up to 310A Nut/Bolt Connection Threaded Current Bar CBB Series page 58-59 High Current Power Terminal Blocks FEATURES • Captive Bolt System • 8-4/0 AWG • Up to 230A • Protective Cover • Stackable PTB Series page 60 Accessories page 61 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 51 CBS SERIES BARRIER RING LUG TERMINAL BLOCKS - PHILLIPS SCREW STUD / RING LUG TERMINALS CBS3U CBS4U CBS5U HIGHLIGHTS FEATURES • Various sizes • Wire size up to 4 AWG • Current rating up to 85 A • Suitable for standard fork type / ring lug connectors • Version with standard • • • Phillips Screw (CBS Series) Version with slotted nut (CSB Series) Compact design 2, 3, 4 pole fork type and ring lug jumpers APPLICATIONS • Applications with vibration • Machinery • Transportation • Vehicles • Provides solution when • ring / fork lug is needed Compact / Space saving Panels 50 A Ring Lug Terminal Phillips Screw Head 65 A Ring Lug Terminal Phillips Screw Head 85 A Ring Lug Terminal Phillips Screw Head Width 9 mm 13 mm 13 mm Length 49 mm 49 mm 49 mm 38 mm 45.5 mm 38 mm 45.5 mm 38 mm 45.5 mm 7.4 g 12.4 g 13.8 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid / stranded) 60947-7-1 22-8 AWG 0.5-6 mm Voltage Rating 600 V Current Rating 50 A 4.5 lb-in Torque Insulation Material E220514 60947-7-1 16-6 AWG 1.5-10 mm 1000V AC/DC 600 V 41 A 65 A 0.5 Nm 10 lb-in E220514 2 60947-7-1 16-4 AWG 1.5-16 mm2 1000V AC/DC 600 V 1000V AC/DC 57 A 85 A 76 A 1.2 Nm 25 lb-in 2.0 Nm Polyamide 66 Polyamide 66 Polyamide 66 Wire Stripping Length – – – Screw / Stud Size M3 M4 M5 Phillips #2 Phillips #2 Phillips #2 Installation Instructions Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CBS3U CBS3U/R CBS3U/BU CBS3U/BL CBS3U/O CBS3U/G CBS3U/Y CBS3U/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CBS4U CBS4U/R CBS4U/BU CBS4U/BL CBS4U/O CBS4U/G CBS4U/Y CBS4U/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CBS5U CBS5U/R CBS5U/BU CBS5U/BL CBS5U/O CBS5U/G CBS5U/Y CBS5U/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCBS3U 50 EPCBS3U 50 EPCBS3U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA802 50 CA802 50 CA802 50 Insulated Jumper Fork Type 2 pole 3 pole 4 pole CA514/15-2 CA514/15-3 CA514/15-4 100 50 50 CA514/2-2 CA514/2-3 CA514/2-4 100 50 50 CA514/2-2 CA514/2-3 CA514/2-4 100 50 50 Insulated Jumper Ring Lug 2 pole 3 pole 4 pole CA514/17-2 CA514/17-3 CA514/17-4 100 50 50 CA514/4-2 CA514/4-3 CA514/4-4 100 50 50 CA514/4-2 CA514/4-3 CA514/4-4 100 50 50 CA728/2 CA728/3 CA728/4 CA728/10 100 100 100 10 CA772/2 CA772/3 CA772/4 CA772/10 100 100 100 10 CA772/2 CA772/3 CA772/4 CA772/10 100 100 100 10 – CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 – 10 10 10 10 10 CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 Internal Jumper 2 pole 3 pole 4 pole 10 pole Protective Cover 2 Terminal 3 Terminal 4 Terminal 100 mm 200 mm 300 mm Marking Tag 52 2 MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) MT9 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) CSB SERIES BARRIER RING LUG TERMINAL BLOCKS - SLOTTED NUT CSB3/N3U STUD / RING LUG TERMINALS CSB5/N5U CSB3/N3UL CSB4/N4U 50 A Ring Lug Terminal Slotted Hex Nut 50 A Ring Lug Terminal Long Slotted Hex Nut 65 A Ring Lug Terminal Slotted Hex Nut 85 A Ring Lug Terminal Slotted Hex Nut Width 9 mm 9 mm 13 mm 13 mm Length 49 mm 49 mm 49 mm 49 mm 38 mm 45.5 mm 38 mm 45.5 mm 38 mm 45.5 mm 38 mm 45.5 mm 10.2 g 11.7 g 19.0 g 19.0 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 22-8 AWG 0.5-6 mm 22-8 AWG 0.5-6 mm 16-6 AWG 1.5-10 mm 16-4 AWG Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 50 A 41 A 50 A 41 A 65 A 57 A 85 A 76 A 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 10 lb-in 1.2 Nm 25 lb-in 2.0 Nm Wire Size (solid / stranded) Torque 2 2 2 1.5-16 mm2 Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Wire Stripping Length – – – – Screw / Stud Size M3 M3 M4 M5 Hex Nut Driver 7 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Insulation Material Installation Instructions Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CSB3/N3U CSB3/N3U/R CSB3/N3U/BU CSB3/N3U/BL CSB3/N3U/O CSB3/N3U/G CSB3/N3U/Y CSB3/N3U/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CSB3/N3UL CSB3/N3UL/R CSB3/N3UL/BU CSB3/N3UL/BL CSB3/N3UL/O CSB3/N3UL/G CSB3/N3UL/Y CSB3/N3UL/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CSB4/N4U CSB4/N4U/R CSB4/N4U/BU CSB4/N4U/BL CSB4/N4U/O CSB4/N4U/G CSB4/N4U/Y CSB4/N4U/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CSB5/N5U CSB5/N5U/R CSB5/N5U/BU CSB5/N5U/BL CSB5/N5U/O CSB5/N5U/G CSB5/N5U/Y CSB5/N5U/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCBS3U 50 EPCBS3U 50 EPCBS3U 50 EPCBS3U 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA802 50 CA802 50 CA802 50 CA802 50 Insulated Jumper Fork Type 2 pole 3 pole 4 pole CA514/15-2 CA514/15-3 CA514/15-4 100 50 50 CA514/15-2 CA514/15-3 CA514/15-4 100 50 50 CA514/2-2 CA514/2-3 CA514/2-4 100 50 50 CA514/2-2 CA514/2-3 CA514/2-4 100 50 50 Insulated Jumper Ring Lug 2 pole 3 pole 4 pole CA514/17-2 CA514/17-3 CA514/17-4 100 50 50 CA514/17-2 CA514/17-3 CA514/17-4 100 50 50 CA514/4-2 CA514/4-3 CA514/4-4 100 50 50 CA514/4-2 CA514/4-3 CA514/4-4 100 50 50 CA728/2 CA728/3 CA728/4 CA728/10 100 100 100 10 CA728/2 CA728/3 CA728/4 CA728/10 100 100 100 10 CA772/2 CA772/3 CA772/4 CA772/10 100 100 100 10 CA772/2 CA772/3 CA772/4 CA772/10 100 100 100 10 – CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 – 10 10 10 10 10 – CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 – 10 10 10 10 10 CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 Internal Jumper 2 pole 3 pole 4 pole 10 pole Protective Cover 2 Terminal 3 Terminal 4 Terminal 100 mm 200 mm 300 mm Marking Tag MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) MT9 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) 53 CSTSN SERIES STUD TYPE RING LUG TERMINAL BLOCKS STUD / RING LUG TERMINALS CSTSN4U CSTSN5U CSTSN6U HIGHLIGHTS FEATURES • Various sizes • Wire size up to 2 AWG • Current rating up to 125 A • Suitable for standard fork • • • • type / ring lug connectors Version with standard Hex Nut (CSTSN Series) Version with slotted barrel (CSTSB Series) Compact design 2, 3, 4 pole fork type and ring lug jumpers APPLICATIONS • Applications with vibration • Machinery • Transportation • Vehicles • Provides solution when ring / fork lug is needed • Compact / Space saving Panels 65 A Bolt Terminal M4 Hex Nut 80 A Bolt Terminal M5 Hex Nut 125 A Bolt Terminal M6 Hex Nut Width 17 mm 17 mm 17 mm Length 50 mm 50 mm 50 mm 40.7 mm 48.0 mm 40.7 mm 48.0 mm 40.7 mm 48.0 mm 21.5 g 23.4 g 30.4 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals Wire Size (solid / stranded) Voltage Rating Torque 60947-7-1 E220514 60947-7-1 E220514 22-6 AWG 1.5-10 mm 22-4 AWG 1.5-16 mm 22-2 AWG 1.5-35 mm2 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 2 2 65 A 57 A 80 A 76 A 125 A 125 A 14 lb-in 1.2 Nm 25 lb-in 2.0 Nm 25 lb-in 3.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Wire Stripping Length – – – Screw / Stud Size M4 M5 M6 Hex Nut Driver 7 mm Hex Nut Driver 8 mm Hex Nut Driver 9 mm Installation Instructions Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CSTSN4U CSTSN4U/R CSTSN4U/BU CSTSN4U/BL CSTSN4U/O CSTSN4U/G CSTSN4U/Y CSTSN4U/W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CSTSN5U CSTSN5U/R CSTSN5U/BU CSTSN5U/BL CSTSN5U/O CSTSN5U/G CSTSN5U/Y CSTSN5U/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CSTSN6U CSTSN6U/R CSTSN6U/BU CSTSN6U/BL CSTSN6U/O CSTSN6U/G CSTSN6U/Y CSTSN6U/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCSTSU 50 EPCSTSU 50 EPCSTSU 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA802 50 CA802 50 CA802 50 Insulated Jumper Fork Type 2 pole 3 pole 4 pole CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA514/7-2 CA514/7-3 CA514/7-4 100 50 50 Jumper Ring Lug 2 pole 3 pole 4 pole CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 CA514/8-2 CA514/8-3 CA514/8-4 100 50 50 2 Terminal 3 Terminal 4 Terminal 100 mm 200 mm 300 mm CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 Protective Cover Marking Tag 54 60947-7-1 E220514 CB SCHEME MT2B4 1 Pk. (100 tags) MT2B4 1 Pk. (100 tags) MT2B4 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) CSTSB SERIES STUD TYPE RING LUG TERMINAL BLOCKS STUD / RING LUG TERMINALS CSTSB4U CSTSB5U 65 A Bolt Terminal Slotted Barrel 65 A Bolt Terminal Slotted Barrel Width 17 mm 17 mm Length 50 mm 50 mm 40.7 mm 48.0 mm 40.7 mm 48.0 mm 24 g 25.5 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 22-6 AWG 1.5-10 mm2 22-4 AWG 1.5-16 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 65 A 57 A 80 A 76 A 14 lb-in 1.2 Nm 25 lb-in 2.0 Nm Torque Insulation Material Polyamide 66 Polyamide 66 Wire Stripping Length – – Screw / Stud Size M4 M5 Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Installation Instructions Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CSTSB4U CSTSB4U/R CSTSB4U/BU CSTSB4U/BL CSTSB4U/O CSTSB4U/G CSTSB4U/Y CSTSB4U/W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CSTSB5U CSTSB5U/R CSTSB5U/BU CSTSB5U/BL CSTSB5U/O CSTSB5U/G CSTSB5U/Y CSTSB5U/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCSTSU 50 EPCSTSU 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA802 50 CA802 50 Insulated Jumper Fork Type 2 pole 3 pole 4 pole CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 Insulated Jumper Ring Lug 2 pole 3 pole 4 pole CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 2 Terminal 3 Terminal 4 Terminal 100 mm 200 mm 300 mm CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 CSTSPC2 CSTSPC2-1 – CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 – 10 10 10 Protective Cover Marking Tag MT2B4 1 Pk. (100 tags) MT2B4 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 55 STH SERIES HINGE TYPE RING LUG TERMINAL BLOCKS STUD / RING LUG TERMINALS STH3 STH4 STH6 HIGHLIGHTS FEATURES • Bolt Feed Through • • • • • Terminals Suitable for standard fork type / ring lugs Captive nut system Only standard flat head screw driver needed to tighten connection IP20 touch proof terminals with hinged plastic cover 2, 3, 4 pole fork type and ring lug jumpers APPLICATIONS • Applications with vibration • Machinery • Transportation • Vehicles • Provides solution when ring / fork lug is needed Dimensions & Weight Width 9 mm 11 mm 18 mm Length 47 mm 46 mm 64 mm 47.3 mm 54.8 mm 52.2 mm 59.0 mm 63.1 mm 70.6 mm 15.0 g 62.5 g 57.8 g Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals Wire Size (solid / stranded) 60947-7-1 E220514 22-8 AWG 1.5-6 mm2 22-8 AWG 1.5-6 mm2 Voltage Rating 600 V 1000V AC/DC 600 V Current Rating 50 A 41 A 50 A 4.5 lb-in 0.5 Nm 14 lb-in Torque Insulation Material 60947-7-1 E220514 22-2 AWG 1.5-35 mm2 1000V AC/DC 600 V 1000V AC/DC 41 A 115 A 125 A 1.2 Nm 25 lb-in 3.0 Nm Polyamide 66 Polyamide 66 Polyamide 66 – – – M3 M4 M6 Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Installation Instructions Wire Stripping Length Screw / Stud Size Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Accessories Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. STH3 STH3/R STH3/BU STH3/BL STH3/O STH3/G STH3/Y STH3/W 100 100 100 100 100 100 100 100 STH4 STH4/R STH4/BU STH4/BL STH4/O STH4/G STH4/Y STH4/W 50 50 50 50 50 50 50 50 STH6 STH6/R STH6/BU STH6/BL STH6/O STH6/G STH6/Y STH6/W 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPSTH3 50 EPSTH4 50 EPSTH6 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 Jumpers Fork Type 2 pole 3 pole 4 pole CA512/15-2 CA512/15-3 CA512/15-4 100 50 50 CA512/13-2 CA512/13-3 CA512/13-4 100 50 50 – – – – – – Insulated Jumpers Fork Type 2 pole 3 pole 4 pole CA514/15-2 CA514/15-3 CA514/15-4 100 50 50 CA514/13-2 CA514/13-3 CA514/13-4 100 50 50 – – – – – – Jumpers Ring Lug 2 pole 3 pole 4 pole CA512/17-2 CA512/17-3 CA512/17-4 100 50 50 CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 – – – – – – Insulated Jumpers Ring Lug 2 pole 3 pole 4 pole CA514/17-2 CA514/17-3 CA514/17-4 100 50 50 CA514/14-2 CA514/14-3 CA514/14-4 100 50 50 – – – – – – Internal Jumpers 2 pole 3 pole 4 pole 10 pole CA773/2 CA773/3 CA773/4 CA773/10 100 50 50 10 – – – – Marking Tag 56 60947-7-1 E220514 CB SCHEME MT8 1 Pk. (100 tags) MT10 – – – – 1 Pk. (100 tags) CA774/2 CA774/3 CA774/4 – MT16 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 100 50 50 – 1 Pk. (100 tags) STH SERIES HINGE TYPE DISCONNECT & TEST TERMINAL BLOCKS STH4DTSH STH4DT STUD / RING LUG TERMINALS STH4DTFT HIGHLIGHTS Disconnect Terminal Block Hinge Type Double Disconnect Terminal Block Feed-Through Terminal Block Disconnect Profile Width 11 mm 22 mm 11 mm Length 86 mm 86 mm 86 mm 52.2 mm 59.0 mm 52.2 mm 59.0 mm 52.2 mm 59.0 mm 42.8 g 42.3 g 36.6 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) type / ring lugs with hinged plastic cover • 2, 3, 4 pole fork type and 60947-7-1 E220514 1.5-6 mm2 22-8 AWG 1.5-6 mm2 22-8 AWG 1.5-6 mm2 600 V 1000V AC/DC 300 V 1000V AC/DC 600 V 1000V AC/DC 35 A 41 A 25 A 34 A 50 A 41 A 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm Current Rating Polyamide 66 Insulation Material Polyamide 66 Polyamide 66 Installation Instructions – – – M4 M4 M4 Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Wire Stripping Length Screw / Stud Size Screwdriver Terminal Blocks Grey Accessories Cat. No. Std. Pk. STH4DT 50 Cat. No. Std. Pk. Cat. No. STH4DTSH Cat. No. Std. Pk. 24 Std. Pk. Cat. No. STH4DTFT Cat. No. EPSTH4DT 50 EPSTH4DT 50 DIN Rail 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 2511120 CA701-15/S 2511160 20 20 10 End Stop CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 CA702 CA802 CA202 100 50 50 Jumpers Fork Type 2 pole 3 pole 4 pole CA512/13-2 CA512/13-3 CA512/13-4 100 50 50 CA512/13-2 CA512/13-3 CA512/13-4 100 50 50 CA512/13-2 CA512/13-3 CA512/13-4 100 50 50 Insulated Jumpers Fork Type 2 pole 3 pole 4 pole CA514/13-2 CA514/13-3 CA514/13-4 100 50 50 CA514/13-2 CA514/13-3 CA514/13-4 100 50 50 CA514/13-2 CA514/13-3 CA514/13-4 100 50 50 Jumpers Ring Lug 2 pole 3 pole 4 pole CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 Insulated Jumpers Ring Lug 2 pole 3 pole 4 pole CA514/14-2 CA514/14-3 CA514/14-4 100 50 50 CA514/14-2 CA514/14-3 CA514/14-4 100 50 50 CA514/14-2 CA514/14-3 CA514/14-4 100 50 50 Insulated Alternate Jumpers 3 pole 4 pole CA514/14-3A CA514/14-4A 10 10 CA514/14-3A CA514/14-4A 10 10 CA514/14-3A CA514/14-4A 10 10 Shorting Plug QJ11/2 25 QJ11/2 25 – – Lock Out Cap LCSTH4DT 25 LCSTH4DT 25 – – Marking Tag MT10 MT10 Applications • Measuring / Control Circuit • Utility Instruments and Transformer Applications • Meter Replacement • External Current Measurement Std. Pk. 50 1 Pk. (100 tags) APPLICATIONS • Disconnect / Test 100 EPSTH4DT MT10 ring lug jumpers Std. Pk. End Plate 1 Pk. (100 tags) profile (STH4DTFT) • Captive nut system • IP20 touch proof terminals 22-8 AWG Voltage Rating Torque 60947-7-1 E220514 Terminals (STH4DTSH) • Feed-Through with same • Suitable for standard fork Technical Data/Ratings Approvals FEATURES • Bolt Disconnect Terminals • Disconnect (STH4DT) • 2 Shorted Disconnect Disconnect / Test Application for Metering CT LCSTH4DT Lockout Cap STH4DT Disconnect Terminal QJ11/2 Shorting Plug CA514/14-3 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 57 CBB SERIES RING LUG POWER TERMINAL BLOCKS STUD / RING LUG TERMINALS CBB35/50 CBB35/50LS CBB70 CBB70LS CBB95 CBB95LS HIGHLIGHTS FEATURES • High Current up to 310A • Feed-Through Terminals • Nut / Bolt version • Version with threaded • • • • current bar (LS) for fast wiring without 2 wrenches Wire crimped into ring / fork lug on to the flat current bar Special Mounting foot design for tight fit on rail Protective Cover in various length 2, 3 pole jumper bars 150 A Feed Through Power Terminal 175 A Feed Through Power Terminal 230 A Feed Through Power Terminal Width 32 mm 38 mm 38 mm Length 75 mm 92 mm 92 mm 47.5 mm 54.5 mm 47.5 mm 54.5 mm 47.5 mm 54.5 mm 82.0 g 157.5 g 193.0 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals Applications • Large size wires • Power Distribution Feed• ing Applications Provides solution when ring / fork lug is needed 60947-7-1 E220514 60947-7-1 E220514 10-1/0 AWG 6-50.0 mm2 8-2/0 AWG 6-70.0 mm2 8-4/0 AWG 16-95.0 mm2 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Voltage Rating APPLICATIONS • High Current Power 60947-7-1 E220514 Wire Size (solid / stranded) Current Rating 150 A 150 A 175 A 192 A 230 A 232 A Torque 27 lb-in 3.0 Nm 54.5 lb-in 6.0 Nm 90 lb-in 10.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length – – – Screw / Stud Size M6 M8 M10 Wrench M6 Wrench M8 Wrench M10 Flat Head 1 x 5.5 mm Flat Head 1 x 1.5 mm Flat Head 1 x 1.5 mm Screwdriver Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey Nut & Bolt configuration Threaded Current Bar Accessories Cat. No. 10 10 Std. Pk. CBB70 CBB70LS Cat. No. 10 10 CBB95 CBB95LS 10 10 Std. Pk. Cat. No. Std. Pk. Partition Plate PPCBB 50 PPCBB 50 PPCBB1 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA102 CA202 50 50 CA102 CA202 50 50 CA102 CA202 50 50 CBBPC1/70 CBBPC1/80 CTSPC2-1 CBBPC1/130 CBBPC1/160 CBBPC1/200 CBBPC1/250 10 10 10 10 10 10 10 CBBPC1/70 CBBPC1/80 CTSPC2-1 CBBPC1/130 CBBPC1/160 CBBPC1/200 CBBPC1/250 10 10 10 10 10 10 10 – – CBBPC2/100 – CBBPC2/160 CBBPC2/200 CBBPC2/250 – – 10 – 10 10 10 CA790/2 CA790/3 10 10 CA791/2 CA791/3 10 10 CA791/2 CA791/3 10 10 Protective Cover for installing on PPCBB & PPCBB1 Permanent Jumper Bars Marking Tag 58 CBB35/50 CBB35/50LS 70 mm 80 mm 100 mm 130 mm 160 mm 200 mm 250 mm 2 pole 3 pole MT12 1 Pk. (100 tags) MT16 1 Pk. (100 tags) MT16 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) CBB SERIES RING LUG TYPE POWER TERMINAL BLOCKS CBB120 CBB120LS STUD / RING LUG TERMINALS CBB150 CBB150LS CBB185 CBB185LS 255 A Feed Through Power Terminal 285 A Feed Through Power Terminal 310 A Feed Through Power Terminal Width 48 mm 48 mm 48 mm Length 100 mm 110 mm 110 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 47.3 mm 54.5 mm 47.3 mm 54.5 mm 47.3 mm 54.5 mm Weight per piece 244.0 g 316.0 g 319.4 g Dimensions & Weight Technical Data/Ratings Approvals 60947-7-1 E220514 Wire Size (solid / stranded) 8-250 KCMIL 16-120 mm 600 V 1000V AC/DC Voltage Rating 60947-7-1 E220514 2 60947-7-1 E220514 8-300 KCMIL 16-150 mm 600 V 1000V AC/DC 2 8-350 KCMIL 16-185 mm2 600 V 1000V AC/DC Current Rating 255 A 269 A 285 A 309 A 310 A 353 A Torque 90 lb-in 10.0 Nm 127 lb-in 14.0 Nm 127 lb-in 14.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 – – – M10 M12 M12 Installation Instructions Wire Stripping Length Screw / Stud Size Wrench M10 Wrench M12 Wrench M12 Flat Head 1 x 1.5 mm Flat Head 1 x 1.5 mm Flat Head 1 x 1.5 mm Screwdriver Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey Nut & Bolt configuration Threaded Current Bar CBB120 CBB120LS 10 10 CBB150 CBB150LS 10 10 CBB185 CBB185LS 10 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Partition Plate PPCBB1 50 PPCBB1 50 PPCBB1 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA102 CA202 50 50 CA102 CA202 50 50 CA102 CA202 50 50 CBBPC2/100 CBBPC2/160 CBBPC2/200 CBBPC2/250 10 10 10 10 CBBPC2/100 CBBPC2/160 CBBPC2/200 CBBPC2/250 10 10 10 10 CBBPC2/100 CBBPC2/160 CBBPC2/200 CBBPC2/250 10 10 10 10 CA793/2 CA793/3 10 10 CA794/2 CA794/3 10 10 CA794/2 CA794/3 10 10 Protective Cover for installing on PPCBB & PPCBB1 Permanent Jumper Bars Marking Tag 100 mm 160 mm 200 mm 250 mm 2 pole 3 pole MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 59 PTB SERIES HIGH CURRENT POWER TERMINAL BLOCKS STUD / RING LUG TERMINALS PTB35/50 PTB35/50SH PTB70/95 PTB70/95SH HIGHLIGHTS PTB35/50SH FEATURES • Panel / DIN Rail mountable • High Current up to 230A • Finger safe protective cover • • (PSPTBXX) Modular / stackable design 2, 3, 4 pole jumper system APPLICATIONS • High Current Power • • • Applications Large size wires Power Distribution Feeding Applications Provides solution when ring / fork lug is needed PTB70/95SH PTB35/50 Dimensions & Weight PTB70/95 Width 25 mm 32 mm Length 113 / 169 mm 130 / 192 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 61.0 / 66.5 mm 68.3 / 73.6 mm 76.6 / 78.0 mm 84.5 / 86.0 mm Weight per piece 112.0 / 130.5 g 174.4 / 198.2 g Technical Data/Ratings Approvals E220514 CB SCHEME Wire Size (solid / stranded) 8-2 AWG 1.5-50 mm 600 V 1000V AC/DC Voltage Rating 60947-7-1 E220514 60947-7-1 2 8-4/0 AWG 1.5-95 mm2 600 V 1000V AC/DC Current Rating 115 A 150 A 230 A 232 A Torque 27 lb-in 3.0 Nm 87 lb-in 10.0 Nm Polyamide 66 Polyamide 66 – – M6 M8 Hex Nut Driver 10 mm Hex Nut Driver 13 mm Insulation Material Installation Instructions Wire Stripping Length Screw / Stud Size Screwdriver Terminal Blocks Cat. No. Grey PTB35/50 PTB35/50SH Accessories 10 10 Cat. No. Std. Pk. PTB70/95 PTB70/95SH 10 10 Cat. No. Std. Pk. Cat. No. Std. Pk. Protective Cover PSPTB35 20 PSPTB70 10 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA102 CA202 50 50 CA102 CA202 50 50 CA703/9 CA704/9 CA705/9 10 10 10 CA703/11 CA704/11 CA705/11 10 10 10 Jumper System 2 pole 3 pole 4 pole Marking Tag MT9 Marking Tag Holder MHPTB35 1 Pk. (100 tags) Marking Tag Holder MHPTB35 60 Std. Pk. MT9 1 Pk. (100 tags) MHPTB35 Protective Cover PSPTB35 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 ACCESSORIES JUMPERS / SHORTING LINKS Fork Type Jumper Terminal Block Series CBS3U CSB3/N3U CSB3/N3UL STH3 CBS4U CBS5U CSB4/N4UL CSB5/N5U CSTSN4U CSTSN5U CSTSN6U CSTSB4U CSTSB5U CSTSN6U STH4 STH4DT STH4DTFT STH6 Poles 2 Pole 3 Pole 4 Pole 10 Pole 2 Pole 3 Pole 4 Pole 10 Pole Cat. No. STUD / RING LUG TERMINALS Insulated Fork Type Jumper Std. Pk. Cat. No. Std. Pk. Ring Lug Jumper Cat. No. Insulated Ring Lug Jumper Std. Pk. Cat. No. Std. Pk. CA512/15-2 100 CA512/15-3 50 CA512/15-4 50 CA514/15-2 100 CA514/15-3 50 CA514/15-4 50 CA512/17-2 CA512/17-3 CA512/17-4 100 50 50 CA514/17-2 100 CA514/17-3 50 CA514/17-4 50 CA512/2-2 CA512/2-3 CA512/2-4 100 50 50 CA514/2-2 CA514/2-3 CA514/2-4 100 50 50 CA512/4-2 CA512/4-3 CA512/4-4 100 50 50 CA514/4-2 CA514/4-3 CA514/4-4 100 50 50 2 Pole 3 Pole 4 Pole CA512/1-2 CA512/1-3 CA512/1-4 100 50 50 CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA512/3-2 CA512/3-3 CA512/3-4 100 50 50 CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 2 Pole 3 Pole 4 Pole 2 Pole 3 Pole 4 Pole 2 Pole 3 Pole 4 Pole CA512/7-2 100 50 CA512/7-3 50 CA512/7-4 CA512/13-2 100 CA512/13-3 50 CA512/13-4 50 CA514/7-2 100 CA514/7-3 50 CA514/7-4 50 CA514/13-2 100 CA514/13-3 50 CA514/13-4 50 CA512/8-2 CA512/8-3 CA512/8-4 CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 100 50 50 CA514/8-2 100 CA514/8-3 50 CA514/8-4 50 CA514/14-2 100 CA514/14-3 50 CA514/14-4 50 N/A N/A N/A Alternate Jumper for STH4DT Series Internal Jumper Cat. No. Std. Pk. Cat. No. Std. Pk. CA728/2 50 CA728/3 50 N/A CA728/4 50 CA728/10 10 CA772/2 100 CA772/3 50 N/A CA772/4 50 CA772/10 10 N/A N/A N/A N/A N/A CA514/14-3A 10 CA514/14-4A 10 CA774/2 CA774/3 CA774/4 N/A 100 50 50 END STOPS CA802 Cat. No CA802 Dimensions 32 x 45 x 8 mm CA707 Std. Pk. 50 Cat. No CA702 Dimensions 34 x 45 x 9 mm CA202 Std. Pk. 50 Cat. No CA202 Dimensions Std. Pk. 44.5 x 50 x 9.5 mm 50 ENDPLATES / PROTECTIVE COVERS For CBS, CSB, CSTS Series Terminal Block CBS Series CSB Series CSTSN Series CSTSB Series STH3 STH4 STH6 STH4DT Std. Pk. Cat. No Dimensions EPCBS3U 26.2 x 49 x 1.5 mm 50 EPCSTSU 31 x 50 x 1.5 mm 50 EPSTH3 EPSTH4 EPSTH6 EPSTH4DT 34 x 47 x 1.5 mm 39.5 x 46 x 1.5 mm 51 x 63.5 x 1.5 mm 37.5 x 86 x 1.5 mm 50 50 50 50 Length 100mm 200mm 300mm Cat. No. CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 Std. Pk. 10 10 10 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 61 OVERVIEW INTRODUCTION SPRING TERMINAL BLOCKS SPRING CLAMP TECHNOLOGY • Easy Installation • Versatile and Vibration Proof • Reliable Gas-tight connection • Fail proof, safe connection • NO torque requirements • Maintenance free • Terminals accept wires with/ without ferrules E220514 60947-7-1 MATERIAL SPECIFICATIONS Current Carrying Metal Corrosion free material Housing Spring Terminal Block Housing • Polyamide PA66 Housing • Self-extinguishing • High mechanical strength • Spring: Stainless Steel • Current Bar: copper tin plated Current Bar Polyamide 66 Specifications Upper Temperature Limit: 105°C Lower Temperature Limit: -50°C Flammability UL94: V2/ V0 Volume Resistivity: 1012 Ω cm Surface Resistivity: 1010 Ω INSTALLATION GUIDELINES 1 2 a Secure Connection b 3 1 Insert Flat-Head Screw Driver into insertion WATCH space to open pre-loaded spring 2 (a) Insert Wire into opening in spring leg. (b) Remove screwdriver. 3 The spring force presses conductor against the current bar for a reliable/safe connection VIDEO CX SERIES FEATURES AND ADVANTAGES COMPACT DESIGN CX4 - MOST COMPACT IN THE INDUSTRY Knife Disconnect Fuse Terminal Push-In Jumper Technology Large Center Marking Area Partition Plate for Separation Side Entry Terminals 62 Unique Design for easy wire entry Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 OVERVIEW SELECTION GUIDE SPRING TERMINAL BLOCKS CX Series FEATURES • Extremely Compact Design • CX4 is the most compact in the industry • Push-In technology jumper system • 2, 3, 4 5, 6, 7, 8, 10 pole • 2 independent jumper channels • Easy breakout of jumper pins for alternate shorting of terminal blocks • Felt tip pen marking option • Center marking tag area • Unique design in plastic housing for easy wire entry • Individually mountable partition plates provide electrical and visual separation • Test Plugs for Test & Measurement needs Feed-Though Multi-Connection Ground/Earth page 64-65 page 66-67 page 68-70 Double Level Electronic Component Fuse page 71 page 72 page 74 Component Carrier Disconnect Side Entry page 75 page 76 page 77 Pluggable Hybrid Distribution page 78 page 79 Angular Series FEATURES • • • • 45 wire entry for easy installation 2.5mm to 8mm terminal blocks (up to 50A) Multi-Connection Terminals 2, 3, 4 connection ground terminals Feed-Through Multi-Connection Multi-Level Ground/Earth page 80 page 81 page 82-83 page 84-85 Accessories Jumpers page 86 End Plates, Partitions, End Stops, Test Plugs page 87 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 63 CX SERIES FEED THROUGH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX4 CX2.5 CX6 HIGHLIGHTS FEATURES • Most compact in Industry • 2, 3, 4, 10 Pole Push-In Jumpers • 2 Jumper Channels for multiple Jumper options • 3 and 4 Connection Terminals • 3 Marking Locations • Many Colors APPLICATIONS • High Vibration • • • Environments Machines Elevator Cabinets Transport 2 Connection Feed-Through 2 Jumper Channels 2 Connection Feed-Through 2 Jumper Channels 2 Connection Feed-Through 2 Jumper Channels Width 5 mm 6 mm 8 mm Length 49.7 mm 54.8 mm 62.1 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 43.0 mm 50.5 mm 6.2 g 9.8 g 14.0 g Dimensions Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid / stranded) E220514 60947-7-1 60947-7-1 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm 24-10 AWG 0.2-4 mm 24-8 AWG 0.2-6 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 20 A 24 A 30 A 32 A 50 A 41 A Insulation Material 2 Polyamide 66 2 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 10 mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CX2.5 CX2.5/R CX2.5/BU CX2.5/BL CX2.5/O CX2.5/G CX2.5/Y CX2.5/W Accessories Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 CX4 CX4/R CX4/BU CX4/BL CX4/O CX4/G CX4/Y CX4/W 100 100 100 100 100 100 100 100 CX6 CX6/R CX6/BU CX6/BL CX6/O CX6/G CX6/Y CX6/W 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5 50 EPCX4 50 EPCX6 50 Partition Plate PPCX4 20 PPCX4 20 PPCX10 20 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 50 10 10 JX6/2 JX6/3 JX6/4 – – – – JX6/10 – 100 50 50 – – – – 10 – Test Plug TX2.5 50 TX4 50 TX6 50 Marking Tag Warning Label MT5 WLX2.5 Shorting Link/ Jumpers 64 10 mm Flat Head 0.5 x 3 mm 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole 1 Pk. (100 tags) 1 Pk. (100 tags) MT6 WLX4 1 Pk. (100 tags) 1 Pk. (100 tags) MT8 WLX6 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) 1 Pk. (100 tags) FEED-THROUGH/MULTI-CONNECTION TERMINAL BLOCKS CX10 CX SERIES SPRING TERMINAL BLOCKS CSC16T CX2.5/3 2 Connection Feed-Through 2 Jump Channels 2 Connection Feed-Through 2 Jump Channels 3 Connection Feed-Through 2 Jump Channels 4 Connection Feed-Through 2 Jumper Channels Width 10 mm 12 mm 5 mm 5 mm Length 71.7 mm 82.0 mm 62.2 mm 74.7 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 49.5 mm 57.0 mm 51.6 mm 59.0 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 22.4 g 39 g 7.6 g 9.4 g Dimensions Weight per piece CX2.5/4 Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 24-6 AWG 0.2-10 mm2 16-4 AWG 1.5-16 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 800V AC/DC 600 V 1000 V AC/DC 600 V 1000V AC/DC Current Rating 65 A 57 A 85 A 76 A 20 A 24 A 20 A 24 A Wire Size (solid | stranded) Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 18 mm 20 mm 10 mm 10 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Insulation Material Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CX10 CX10/R CX10/BU CX10/BL CX10/O CX10/G CX10/Y CX10/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CSC16T CSC16T/R CSC16T/BU CSC16T/BL CSC16T/O CSC16T/G CSC16T/Y CSC16T/W 50 50 50 50 50 50 50 50 CX2.5/3 CX2.5/3/R CX2.5/3/BU CX2.53/BL CX2.5/3/O CX2.5/3/G CX2.5/3/Y CX2.53/W Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CX2.5/4 CX2.5/4/R CX2.5/4/BU CX2.5/4/BL CX2.5/4/O CX2.5/4/G CX2.5/4/Y CX2.5/4/W 50 50 50 50 50 50 50 50 Std. Pk. EPCX10 20 EPCSC16T 50 EPCX2.5/3 50 EPCX2.5/4 20 Partition Plate PPCX10 20 – – PPCX4/3 20 PPCX4/4 20 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX10/2 – – – – – – – – 20 – – – – – – – – CA801/5 – – – – – – – – 100 – – – – – – – – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – Test Plug TX10 50 – – TX2.5 50 TX2.5 50 Marking Tag Warning Label MT10 WLX10 1 Pk. (100 tags) 100 – – MT5 WLX2.5 Std. Pk. 1 Pk. (100 tags) 100 Cat. No. Std. Pk. Cat. No. 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Std. Pk. Cat. No. End Plate Shorting Link/ Jumpers Cat. No. Std. Pk. MT5 WLX2.5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 1 Pk. (100 tags) 100 65 CX SERIES MULTIPLE CONNECTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX6/3 CX4/4 CX4/3 CX10/3 3 Connection Feed-Through 2 Jumper Channels 4 Connection Feed-Through 2 Jumper Channels 3 Connection Feed-Through 2 Jumper Channels 4 Connection Feed-Through 2 Jumper Channels Width 6 mm 6 mm 8 mm 10 mm Length 70.5 mm 86.2 mm 82.2 mm 97.0 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 43.0 mm 50.5 mm 49.5 mm 57.0 mm 10.8 g 13.6 g 19.8 g 35.0 g Dimensions Weight per piece UL Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 IEC 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4.0 mm2 24-8 AWG 0.2-6 mm2 24-6 AWG 0.2-10 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 30 A 32 A 30 A 32 A 50 A 41 A 65 A 57 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 10 mm 14 mm 18 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CX4/3 CX4/3/R CX4/3/BU CX4/3/BL CX4/3/O CX4/3/G CX4/3/Y CX4/3/W Accessories Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CX4/4 CX4/4/R CX4/4/BU CX4/4BL CX4/4/O CX4/4/G CX4/4/Y CX4/4/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CX6/3 CX6/3/R CX6/3/BU CX6/3/BL CX6/3/O CX6/3/G CX6/3/Y CX6/3/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. CX10/3 CX10/3/R CX10/3/BU CX10/3BL CX10/3/O CX10/3/G CX10/3/Y CX10/3/W Std. Pk. 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX4/3 20 EPCX4/4 20 EPCX6/3 20 Partition Plate PPCX4/3 20 PPCX4/4 20 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 50 10 10 JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 50 10 10 JX6/2 JX6/3 JX6/4 – – – – JX6/10 – 100 50 50 – – – – 10 – JX10/2 – – – – – – – – 20 – – – – – – – – Test Plug TX4 50 TX4 50 TX6 50 TX10 50 Marking Tag Warning Label MT6 WLX4 Shorting Link/ Jumpers 66 10 mm Flat Head 0.6 x 3.5 mm 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole 1 Pk. (100 tags) 1 Pk. (100 tags) MT6 WLX4 1 Pk. (100 tags) 1 Pk. (100 tags) – MT8 WLX6 – 1 Pk. (100 tags) 1 Pk. (100 tags) Cat. No. EPCX10/3 – MT10 WLX10 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 20 – 1 Pk. (100 tags) 1 Pk. (100 tags) CX SERIES MULTIPLE CONNECTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX2.5/4(E)D1 CX2.5/4P Double potential Terminal Block. 2 different voltage potentials. 2 Jumper Channels on one side 4 connection spring Terminal Block. With built in Diode (1N4007) for reverse polarity protection to allow current only to flow in one direction Width 5 mm 5 mm Length 74.7 mm 74.7 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 9.6 g 9.4 g Dimensions Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating - - - - Insulation Material Polyamide 66 Polyamide 66 10 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) CX2.5/4P Accessories Cat. No. Std. Pk. 50 Std. Pk. Cat. No. CX2.5/4(E)D1 Cat. No. Std. Pk. 50 Std. Pk. End Plate EPCX2.5/4 20 EPCX2.5/4 20 Partition Plate PPCX4/4 20 PPCX4/4 20 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – Test Plug TX2.5 50 TX2.5 50 Marking Tag Warning Label MT5 WLX2.5 100 100 MT5 WLX2.5 100 100 Shorting Link/ Jumpers 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 67 CX SERIES GROUND / EARTH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXG4 CXG2.5 CXG6 HIGHLIGHTS FEATURES • 2, 3, 4 Connection Ground Terminals • Yellow / Green Color as per Industry Standard • Snap-On feet • 3 Marking Locations 2 Connection Ground Terminal 2 Jumper Channels 2 Connection Ground Terminal 2 Jumper Channels 2 Connection Ground Terminal 2 Jumper Channels Width 5 mm 6 mm 8 mm Length 49.7 mm 54.8 mm 62.1 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 43.0 mm 50.5 mm 8.4 g 11.0 g 20.2 g Dimensions APPLICATIONS • Grounding Applications Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-10 AWG 0.2-4 mm2 24-8 AWG 0.2-6 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating – – – – – – Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 10 mm 10 mm 14 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow / Green CXG2.5 100 CXG4 100 CXG6 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5 50 EPCX4 50 EPCX6 50 Partition Plate PPCX4 20 PPCX4 20 PPCX10 20 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 50 10 10 JX6/2 JX6/3 JX6/4 – – – – JX6/10 – 100 50 50 – – – – 10 – Test Plug TX2.5 50 TX4 50 TX6 50 Marking Tag Warning Label MT5 WLX2.5 100 50 MT6 WLX4 100 100 MT8 WLX6 100 100 Shorting Link/ Jumpers 68 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 MULTIPLE CONNECTION GROUND / EARTH TERMINAL BLOCKS CX SERIES SPRING TERMINAL BLOCKS CXG2.5/4 CXG4/3 CXG10 CXG2.5/3 2 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels 4 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels Width 10 mm 5 mm 5 mm 6 mm Length 62.1 mm 62.2 mm 74.7 mm 70.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 43.0 mm 50.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 29.4 g 10.2 g 12.4 g 14.0 g Dimensions Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 24-6 AWG 0.2-10 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating – – – – – – – – Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 18 mm 10 mm 10 mm 10 mm Flat Head 0.8 x 4 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Std. Pk. Yellow / Green CXG10 50 Cat. No. Std. Pk. End Plate EPCX10 20 EPCX2.5/3 50 Partition Plate PPCX10 20 PPCX4/3 DIN Rail 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 Std. Pk. Cat. No. Std. Pk. 50 CXG4/3 50 Std. Pk. Cat. No. Std. Pk. EPCX2.5/4 20 EPCX4/3 20 20 PPCX4/4 20 PPCX4/3 20 2511120 CA701-15/S 20 10 2511120 CA701-15/S 20 10 2511120 CA701-15/S 20 10 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX10/2 – – – – – – – – 20 – – – – – – – – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 50 10 10 JX6/2 JX6/3 JX6/4 – – – – JX6/10 – 100 50 50 – – – – 10 – Test Plug TX10 50 TX2.5 50 TX2.5 50 TX4 50 Marking Tag Warning Label MT10 WLX10 100 100 MT5 WLX2.5 100 100 MT5 WLX2.5 100 100 MT6 WLX4 100 100 Accessories Shorting Link/ Jumpers 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Cat. No. CXG2.5/3 Cat. No. Std. Pk. 100 Std. Pk. Cat. No. CXG2.5/4 Cat. No. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 69 CX SERIES MULTIPLE CONNECTION GROUND / EARTH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXG6/3 CXG4/4 CXG10/3 4 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels Width 6 mm 8 mm 10 mm Length 86.2 mm 82.2 mm 82.2 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 38.0 mm 45.5 mm 43.0 mm 50.5 mm 43.0 mm 50.5 mm 17.2 g 26.0 g 35.0 g Dimensions Weight per piece UL Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 60947-7-1 24-10 AWG 0.2-4 mm2 24-8 AWG 0.2-6 mm2 24-6 AWG 0.2-10 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating – – – – – – Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 10 mm 10 mm 18 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow / Green CXG4/4 50 CXG6/3 50 Accessories CXG10/3 50 Cat. No. Std. Pk. Cat. No. Std. Pk. EPCX4/4 20 EPCX6/3 20 Partition Plate PPCX4/4 20 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 50 10 10 JX6/2 JX6/3 JX6/4 – – – – JX6/10 – 100 50 50 – – – – 10 – JX10/2 – – – – – – – – 20 – – – – – – – – Test Plug TX4 50 TX6 50 TX10 50 Marking Tag Warning Label MT6 WLX4 100 100 MT8 WLX6 100 100 MT10 WLX10 100 100 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole – – Cat. No. Std. Pk. End Plate Shorting Link/ Jumpers 70 Cat. No. EPCX10/3 – Std. Pk. 20 – Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 CX SERIES DOUBLE LEVEL TERMINAL BLOCKS CXDL2.5 SPRING TERMINAL BLOCKS CXDL2.5(I.S) CXDLG2.5 CXDLG2.5(I.S) Double Level Terminal Jumpers / Marking on both levels Double Level Terminal Internally Shorted Top Level Feed-Through Bottom Level Grounding Circuit 4 Connection Ground Terminal Width 5 mm 5 mm 5 mm 5 mm Length 71 mm 71 mm 71 mm 71 mm 49.5 mm 57 mm 49.5 mm 57 mm 49.5 mm 57 mm 49.5 mm 57 mm 10.4 g 11.0 g 13.2 g 13.8 g Dimensions Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V Current Rating 20 A 24 A 20 A Insulation Material E220514 60947-7-1 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 24 A 20 A (Top Level) 24 A (Top Level) - - Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 10 mm 10 mm 10 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CXDL2.5 CXDL2.5/R CXDL2.5/BU CXDL2.5BL CXDL2.5/O CXDL2.5/G CXDL2.5/Y CXDL2.5/W Accessories Cat. No. End Plate EPCXDL2.5 Partition Plate – Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. 50 – Cat. No. CXDL2.5(I.S) CXDL2.5(I.S)/R CXDL2.5(I.S)/BU CXDL2.5(I.S)/BL CXDL2.5(I.S)/O CXDL2.5(I.S)/G CXDL2.5(I.S)/Y CXDL2.5(I.S)/W Cat. No. EPCXDL2.5 – Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. 50 – Cat. No. CXDLG2.5 Yellow / Green Cat. No. EPCXDL2.5 – Std. Pk. 50 Std. Pk. 50 – Cat. No. CXDLG2.5(I.S) Yellow / Green Cat. No. EPCXDL2.5 – Std. Pk. 50 Std. Pk. 50 – DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – Test Plug TX2.5 50 TX2.5 50 TX2.5 50 TX2.5 50 Marking Tag Warning Label MT5 WLX2.5 100 100 MT5 WLX2.5 100 100 MT5 WLX2.5 100 100 MT5 WLX2.5 100 100 Shorting Link/ Jumpers 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 71 CX SERIES SPRING TERMINAL BLOCKS TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS CXDL2.5(E)D1 CXDL2.5(E)D2 CXDL2.5(E)D3 HIGHLIGHTS FEATURES • Various configurations of • • • Electronic Components soldered into CXDL2.5 double level Terminal Block Various Diode/ Resistor combinations Various Indicator options 4 Connection points for convenient wiring Arc Suppression Circuit Diode Arc Suppression Circuit Diode Reverse Polarity Protection Diode Width 5 mm 5 mm 5 mm Length 72.7 mm 72.7 mm 72.7 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 10.6 g 10.6 g 10.6 g Dimensions APPLICATIONS • Reverse polarity protection • Lamp Testing • AC/ DC voltage Indication Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V Current Rating - - - Insulation Material Polyamide 66 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm2 1000V AC/DC 600 V 1000V AC/DC - 20 A (Top Level) 24 A (Top Level) Polyamide 66 Polyamide 66 Electronic Component Specifications Diode Type Diode Reverse Voltage / Current 1N 4007 1N 4007 1N 4007 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A - - - Indicator Voltage Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 10 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Cat. No. Grey (standard) CXDL2.5(E)D1 Accessories Cat. No. Std. Pk. 50 Std. Pk. Cat. No. CXDL2.5(E)D2 Cat. No. Std. Pk. 50 Std. Pk. Cat. No. CXDL2.5(E)D3 Cat. No. Std. Pk. 50 Std. Pk. End Plate EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – MT5 100 MT5 100 MT5 100 Shorting Link/ Jumpers Marking Tag 72 10 mm Flat Head 0.5 x 3 mm 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 CX SERIES TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS SPRING TERMINAL BLOCKS CXDL2.5(E)DD1/DD2 CXDL2.5(E)DD3/DD4 CXDL2.5(E)LD1 DD1 CXDL2.5(E)TS1 DD3 Diode Circuit for lamp testing DD2 Diode Circuit for lamp testing DD4 Voltage Indicator PT100 Temperature Sensor Width 5 mm 5 mm 5 mm 5 mm Length 72.7 mm 72.7 mm 72.7 mm 72.7 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 10.6 g 10.6 g 10.6 g 12.2 g Dimensions Weight per piece UL Technical Data/Ratings Approvals E220514 Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating - - - - - - - - Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 1N 4007 1N 4007 1N 4007 1N 4007 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A - - 6-60V / 110-240V - 10 mm 10 mm 10 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Electronic Component Specifications Diode Type Diode Reverse Voltage / Current Indicator Voltage Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) CXDL2.5(E)DD1 CXDL2.5(E)DD2 Accessories Cat. No. Std. Pk. 50 50 Std. Pk. Cat. No. CXDL2.5(E)DD3 CXDL2.5(E)DD4 Cat. No. Std. Pk. 50 50 Std. Pk. Cat. No. Std. Pk. Cat. No. CXDL2.5(E)LD1/6-60V 50 CXDL2.5(E)LD1/110-240V 50 CXDL2.5(E)TS1 Cat. No. Cat. No. Std. Pk. Std. Pk. 50 Std. Pk. End Plate EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – MT5 100 MT5 100 MT5 100 MT5 100 Shorting Link/ Jumpers Marking Tag 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 73 CX SERIES FUSE TERMINAL BLOCKS 5 x 20 mm SPRING TERMINAL BLOCKS CXF4 CXF4(L)6-60V CXF4(L)110-240V HIGHLIGHTS FEATURES • CXF4 Series accepts • • • • • 5x20mm / 5x25mm fuse types Completely enclosed, no endplates Version with LED for blown fuse indication AC and DC compatible Large marking area No polarity required APPLICATIONS • Control systems with fuse protection 220KΩ 27KΩ Dimensions Width 6 mm 6 mm 6 mm Length 65.4 mm 65.4 mm 65.4 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 61.3 mm 68.8 mm 61.3 mm 68.8 mm 61.3 mm 68.8 mm 16 g 16 g 16 g Weight per piece Technical Data/Ratings Approvals E220514 CB SCHEME Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 10 A 10 A 10 A 10 A 10 A 10 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Fuse Specifications Fuse Type 5x20 mm 5x20 mm 5x20 mm 6-60V AC/DC 110-240V AC/DC 10 mm 10 mm 10 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm LED Indicator Voltage – – Installation Instructions Screwdriver Terminal Blocks Cat. No. Std. Pk. Grey (standard) Blue BU Black BL CXF4 CXF4/BU CXF4/BL 50 50 50 Cat. No. Std. Pk. Accessories Std. Pk. CXF4(L)6-60V CXF4(L)6-60V/BU CXF4(L)6-60V/BL Cat. No. 50 50 50 Std. Pk. Cat. No. Std. Pk. CXF(L)110-240V 50 CXF4(L)110-240V/BU 50 CXF4(L)110-240V/BL 50 Cat. No. Std. Pk. – 2511120 CA701-15/S 20– 10 – 2511120 CA701-15/S 20– 10 – 2511120 CA701-15/S 20– 10 JX4/2 JX4/3 JX4/4 JX4/8 JX4/10 JX4/16 100 50 50 50 10 10 JX4/2 JX4/3 JX4/4 JX4/8 JX4/10 JX4/16 100 50 50 50 10 10 JX4/2 JX4/3 JX4/4 JX4/8 JX4/10 JX4/16 100 50 50 50 10 10 Test Plug TX4 50 TX4 50 TX4 50 Marking Tag Warning Label MT6 WLX4 100 100 MT6 WLX4 100 100 MT6 WLX4 100 100 DIN Rail Shorting Link/ Jumpers Fuses 5 x 20 mm 74 Cat. No. Current Rating 0.1A 0.2A 0.5A 1.0A 2.0A 2 pole 3 pole 4 pole 8 pole 10 pole 16 pole Slow Blow Cat. No 0.1M5x20T 0.2M5x20T 0.5M5x20T 1.0M5x20T 2.0M5x20T Fast Blow Cat. No 0.1M5x20F 0.2M5x20F 0.5M5x20F 1.0M5x20F 2.0M5x20F Current Rating Slow Blow Cat. No Fast Blow Cat. No 4.0A 5.0A 6.3A 8.0A 10.0A 4.0M5x20T 5.0M5x20T 6.3M5x20T 8.0M5x20T 10.0M5x20T 4.0M5x20F 5.0M5x20F 6.3M5x20F 8.0M5x20F 10.0M5x20F Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Ø5mm (0.2 in.) 20mm (0.79 in.) Wire Stripping Length CX SERIES COMPONENT CARRIER TERMINAL BLOCKS CXCC4 SPRING TERMINAL BLOCKS CPD1 CPF CPF(L) 27KΩ Dimensions Width 6 mm 6 mm 6 mm 6 mm Length 65.4 mm 28 mm 28 mm 28 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 61.3 mm 68.8 mm 3.8 g 3.8 g 4.2 g Weight per piece 10.2 g Technical Data/Ratings Approvals E220514 CB SCHEME Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating * * 1A 1A 10 A 10 A 10 A 10 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Component carrier base Plug module with diode Diode Type IN4007 – – – 6-60V AC/DC 110-240V AC/DC 10 mm – – – Flat Head 0.6 x 3.5 mm – – – Carrier Specifications Component Type LED Indicator Voltage Plug module for 5x20 mm fuse Plug module for 5x20 mm fuse with LED indicator Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXCC4 50 CPD1 50 Cat. No. Accessories Cat. No. CPF Std. Pk. 50 Cat. No. CPF(L)6-60V CPF(L)110-240V Std. Pk. 50 50 Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 CA701-15/S 20 10 – – – – – – – – – – – – End Stop CA702 CA802 CA103 50 50 50 – – – – – – – – – – – – – – – – – – JX4/2 JX4/3 JX4/4 JX4/8 JX4/10 JX4/16 100 50 50 50 10 10 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Test Plug TX4 50 – – – – – – Marking Tag Warning Label MT6 SWL4 100 50 MT6 – Shorting Link/ Jumpers 2 pole 3 pole 4 pole 8 pole 10 pole 16 pole 100 – MT6 – 100 – MT6 – 100 – * Current rating is based on plug used. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 75 CX SERIES DISCONNECT & TEST TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXK2.5 CXK2.5/4 CXK4 2 Connection Disconnect 2 Jumper Channels 4 Connection Disconnect 2 Jumper Channels 2 Connection Disconnect 2 Jumper Channels Width 5 mm 5 mm 6 mm Length 62.2 mm 74.7 mm 70.5 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 38 mm 45.5 mm 38 mm 45.5 mm 38 mm 45.5 mm 8.65 g 11.9 g 11.2 g Dimensions Weight per piece Technical Data/Ratings Approvals E220514 CB SCHEME Wire Size (solid | stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 24-12 AWG 0.2-2.5 mm 24-12 AWG 0.2-2.5 mm 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 16A 20A 16A 20A 22A 22A Insulation Material 2 Polyamide 66 2 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 10 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CXK2.5 CXK2.5/R CXK2.5/BU CXK2.5/BL CXK2.5/O CXK2.5/G CXK2.5/Y CXK2.5/W Accessories Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. CXK2.5/4 CXK2.5/4/R CXK2.5/4/BU CXK2.5/4/BL CXK2.5/4/O CXK2.5/4/G CXK2.5/4/Y CXK2.5/4/W Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. CXK4 CXK4/R CXK4/BU CXK4/BL CXK4/O CXK4/G CXK4/Y CXK4/W Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. End Plate EPCX2.5/3 50 EPCX2.5/4 50 – – Partition Plate PPCX4/3 20 PPCX4/4 20 PPCX4/3 20 DIN Rail 2511120 CA701-15/S 20 10 2511120 CA701-15/S 20 10 2511120 CA701-15/S 20 10 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 10 10 10 Test Plug TX2.5 50 TX2.5 50 TX4 50 Marking Tag Warning Label MT5 WLX2.5 100 100 MT5 WLX2.5 100 100 MT6 WLX4 100 100 Shorting Link/ Jumpers 76 10 mm Flat Head 0.5 x 3 mm 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 CX SERIES SIDE ENTRY FEED THROUGH TERMINAL BLOCKS CXS2.5 SPRING TERMINAL BLOCKS CXSG2.5, CXSG4 CXS4 HIGHLIGHTS FEATURES • Side Entry Spring Terminals 5 mm Side Entry Feed Through 6 mm Side Entry Feed Through 5 / 6 mm Side Entry Ground Terminal Width 5 mm 6 mm 5 / 6 mm Length 43 mm 43 mm 43 mm 43.5 mm 51 mm 43.5 mm 51 mm 43.5 mm 51 mm 5.4 g g 8.4 g Dimensions Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece UL Technical Data/Ratings Approvals Wire Size 60947-7-1 E220514 CB SCHEME CXS2.5 CXS4 60947-7-1 regular CX Series • 5mm and 6mm Feed Through Terminal • 2 Connection Ground Blocks • Low Height requirements APPLICATIONS • Flat Cabinets • Same wire entry as 60947-7-1 E220514 24-12 AWG - 0.2-2.5 mm2 - 24-10 AWG 0.2-4 mm2 24-12 AWG 24-10 AWG 0.2-2.5 mm2 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 20A 24A 30A 32A – – Insulation Material • Compact Design • Same Jumpers as Polyamide 66 Polyamide 66 Polyamide 66 9 mm 10 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm regular screw terminals Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CXS2.5 CXS2.5/R CXS2.5/BU CXS2.5/BL CXS2.5/O CXS2.5/G CXS2.5/Y CXS2.5/W Accessories Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. CXS4 CXS4/R CXS4/BU CXS4/BL CXS4/O CXS4/G CXS4/Y CXS4/W Cat. No. Std. Pk. 50 50 50 50 50 50 50 50 Std. Pk. Cat. No. CXSG2.5 CXSG4 Yellow / Green Cat. No. Std. Pk. 50 50 Std. Pk. End Plate EPCXS2.5 50 EPCXS2.5 50 EPCXS2.5 EPCXS2.5 50 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – JX4/2 JX4/3 JX4/4 – – – JX4/8 JX4/10 JX4/16 100 50 50 – – – 10 10 10 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 – 100 50 50 50 10 10 10 10 – Test Plug TX2.5 50 – Marking Tag Warning Label MT5 WLX2.5 100 100 MT5 WLX2.5 Shorting Link/ Jumpers 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole 16 pole – 100 100 – MT5 WL2.5 – 100 100 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 77 CX-PLUGGABLE PLUGGABLE FEED-THROUGH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX2.5/1B CX2.5PN CX2.5SN DIN Rail Base Stackable Terminal Plug Stackable Terminal Socket Width 5 mm 5 mm 5 mm Length 50.8 mm 17.5 mm 18 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 38.2 mm 45.7 mm 42.0 mm 40.0 mm 6.6 g 6.3 g 6.0 g HIGHLIGHTS FEATURES • Pluggable Terminal Blocks • Pluggable Wire to DIN Rail • • • • connection (CX2.5/1B-CX2.5PN) Pluggable Wire to Wire Connection (CX2.5SN - CX2.5PN) Easy Clip multi-wire solution Polarizing plug with coding pin CXPOL 2/4 way strain relief (CXS2RN, CXS4RN) APPLICATIONS • Wire harness for easy • Dimensions & Weight Weight per piece UL Technical Data/Ratings Approvals CB SCHEME connection Pluggable wire to wire connection inside panels Wire Size (solid / stranded) UL 60947-7-1 UL 60947-7-1 60947-7-1 24-12 AWG 0.2-2.5 mm 24-12 AWG 0.2-2.5 mm 24-12 AWG 0.2-2.5 mm2 Voltage Rating 300 V 800 V 300 V 800 V 300 V 800 V Current Rating 20 A 24 A 20 A 24 A 20 A 24 A Insulation Material 2 2 Polyamide 66 Polyamide 66 Polyamide 66 8 mm 8 mm 8 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Installation Instructions Wire Stripping Length CXSR4N Screwdriver CX2.5PN Terminal Blocks Cat. No. Grey (standard) Start Element Last Element 2 pole CXLPN 3 pole 4 pole 5 pole 6 pole CX2.5/1B Accessories CX2.5PN CXSR2N CXDIN 78 CX2.5/1B Std. Pk. 100 Cat. No. CX2.5PN CX2.5PLN CX2.5PN/2 CX2.5PN/3 CX2.5PN/3 CX2.5PN/4 CX2.5PN/5 Cat. No. Std. Pk. 50 50 50 50 50 50 50 Std. Pk. Cat. No. CX2.5SN CX2.5SLN CX2.5SN/2 CX2.5SN/3 CX2.5SN/4 CX2.5SN/5 CX2.5SN/6 Cat. No. Std. Pk. 50 50 50 50 50 50 50 Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5 50 – – – – DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Clamp CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 100 50 50 50 10 10 10 10 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Shorting Link/ Jumpers 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole DIN Mounting Foot – – – – Locking Clip – – CXLPN 25 – – – – – – CXSR2N CXSR4N 25 25 CXSR2N CXSR4N 25 25 25 CXPOL 25 CXPOL Strain Relief 2 Way 4 Way Coding Pin CXPOL Marking Tag MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) CXDIN MT5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 25 25 1 Pk. (100 tags) COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS CXDB35/10 CX-DISTRIBUTION SPRING TERMINAL BLOCKS CXDB35/10A HIGHLIGHTS with Allen Screw 1 Flat Head Screw Input 4 Spring Clamp Outputs 1 Hex Screw Input 4 Spring Clamp Outputs Width 16 mm 16 mm Length 81.6 mm 81.6 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 46.8 mm 54.3 mm 46.8 mm 54.3 mm 53.2 g 53.2 g Dimensions & Weight Weight per piece CB SCHEME 60947-7-1 E220514 60947-7-1 600 V 1000V AC/DC 600 V 1000V AC/DC Insulation Material Polyamide 66 (4 x41A) • Modular system • Standard slot & hex screw versions • Expandable with standard CX Series APPLICATIONS • Miniature Circuit Breaker (MCB) E220514 Voltage Rating Terminal Block • Screw input (115A) • 4 spring clamp outputs jumpers and terminal blocks • Easy Installation General Specifications Approvals FEATURES • Hybrid Distribution distribution • Limited space distribution Polyamide 66 Output Expansion CXDB35/10A INPUT Technical Data/Ratings Wire Size (solid / stranded) 14-2 AWG 1.5-35 mm2 14-2 AWG 1.5-35 mm2 Current Rating 115 A 125 A 115 A 125 A Torque 25 lb-in 2.5 Nm 25 lb-in 2.5 Nm Installation Instructions Terminal Blocks (see page 64) Wire Stripping Length Screwdriver 2 x CX6 17 mm 17 mm Flat Head 1.0 x 5.5 mm Hex Screw M5 JX6/3 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 24-8 AWG 0.2-10 mm2 24-8 AWG 0.2-10 mm2 41 A 41 A 41 A 41 A Current Rating MCB Distribution Example Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Grey Accessories 15 mm 15 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Cat. No. CXDB35/10 Cat. No. Std. Pk. 20 Std. Pk. Cat. No. CXDB35/10A Cat. No. Std. Pk. 20 Std. Pk. DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Clamp CA702 CA802 CA103 50 50 50 CA702 CA802 CA103 50 50 50 Jumpers JX6/2 JX6/3 JX6/4 JX6/10 100 50 50 10 JX6/2 JX6/3 JX6/4 JX6/10 100 50 50 10 Marking Tag MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 79 ANGULAR SERIES ANGULAR FEED-THROUGH SPRING TERMINAL BLOCKS AS2.5 AS6 AS4 HIGHLIGHTS FEATURES • 45” Wire entry for easy installation • 2.5mm to 8mm terminal blocks • 22-8 AWG wire sizes • 2, 3, and 4 Connection • Ground Terminals Accessories APPLICATIONS • Panels with limited wiring space • Vibration Applications • Elevator Cabinets • People Movers • Transportation 2 Connection Feed-Through 2 Jumper Slots 2 Connection Feed-Through 2 Jumper Slots 2 Connection Feed-Through 2 Jumper Slots Width 5 mm 6 mm 8 mm Length 54 mm 61.5 mm 74 mm 44.0 mm 51.0 mm 44.0 mm 51.0 mm 49.3 mm 57.0 mm 6.5 g 9.0 g 14.8 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 22-12 AWG 0.34-2.5 mm 22-10 AWG 0.2-4 mm 22-8 AWG 0.2-6 mm2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 25 A 24 A 35 A 32 A 50 A 41 A Insulation Material 2 Polyamide 66 2 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 15 mm 15 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 AS4 AS4/R AS4/BU AS4/BL AS4/O AS4/G AS4/Y AS4/W 100 100 100 100 100 100 100 100 AS6 AS6/R AS6/BU AS6/BL AS6/O AS6/G AS6/Y AS6/W 50 50 50 50 50 50 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS4 50 EPAS6 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA103 CA702 CA802 50 50 50 CA103 CA702 CA802 50 50 50 CA103 CA702 CA802 50 50 50 2 Pole Jumper CA801/1 100 CA801/2 100 CA801/3 100 Jumpers Alternate CA801/1-3 100 CA801/2-3 100 CA801/3-3 100 Push in wire jumper CA901/1 100 CA901/2 100 CA901/3 100 – CA901/5 CA901/6 CA801/8 – 100 100 100 CA901/4 – CA901/6 – 100 – 100 – CA901/4 CA901/5 – CA801/8 100 100 – 100 Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Step Down Jumper Marking Tag Cat. No. AS2.5 AS2.5/R AS2.5/BU AS2.5/BL AS2.5/O AS2.5/G AS2.5/Y AS2.5/W Accessories 80 11 mm Flat Head 0.5 x 3mm AS6 to AS4 AS6 to AS2.5 AS4 to AS2.5 AS6 to AS2.5 MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) ANGULAR SERIES MULTI-CONNECTION ANGULAR FEED-THROUGH AS2.5/3 SPRING TERMINAL BLOCKS AS2.5/4 AS4/3 AS4/4 3 Connection Feed-Through 2 Jumper Slots 4 Connection Feed-Through 3 Connection Feed-Through 2 Jumper Slots 4 Connection Feed-Through Width 5 mm 5 mm 6 mm 6 mm Length 54 mm 54 mm 61.5 mm 61.5 mm 44.0 mm 51.0 mm 44.0 mm 51.0 mm 44.0 mm 51.0 mm 44.0 mm 51.0 mm 7.5 g 15.5 g 11.0 g 12.6 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 E220514 60947-7-1 22-12 AWG 0.34-2.5 mm2 22-12 AWG 0.34-2.5 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 25 A 24 A 25 A 24 A 35 A 32 A 35 A 32 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 11 mm 11 mm 15 mm 15 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Cat. No. AS2.5/3 AS2.5/3/R AS2.5/3/BU AS2.5/3/BL AS2.5/3/O AS2.5/3/G AS2.5/3/Y AS2.5/3/W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. AS2.5/4 AS2.5/4/R AS2.5/4/BU AS2.5/4/BL AS2.5/4/O AS2.5/4/G AS2.5/4/Y AS2.5/4/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. AS4/3 AS4/3/R AS4/3/BU AS4/3/BL AS4/3/O AS4/3/G AS4/3/Y AS4/3/W 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS2.5 50 EPAS4 50 EPAS4 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA103 CA702 CA802 50 50 50 CA103 CA702 CA802 50 50 50 CA103 CA702 CA802 50 50 50 CA103 CA702 CA802 50 50 50 2 Pole Jumper CA801/1 100 CA801/2 100 Jumpers Alternate CA801/1-3 100 – – CA801/2-3 100 – – Push in wire jumper CA901/1 100 – – CA901/2 100 – – – CA901/5 CA901/6 CA801/8 – 100 100 100 – – – – – – – – CA901/4 – CA901/6 – 100 – 100 – – – – – – – – – Marking Tag AS6 to AS4 AS6 to AS2.5 AS4 to AS2.5 AS6 to AS2.5 MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Cat. No. 100 100 100 100 100 100 100 100 Std. Pk. Step Down Jumper Std. Pk. AS4/4 AS4/4/R AS4/4/BU AS4/4/BL AS4/4/O AS4/4/G AS4/4/Y AS4/4/W Cat. No. DOES NOT ACCEPT JUMPERS Cat. No. Std. Pk. Std. Pk. DOES NOT ACCEPT JUMPERS MT6 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) 81 ANGULAR SERIES DOUBLE LEVEL ANGULAR FEED-THROUGH SPRING TERMINAL BLOCKS AS6/3 ADL2.5(E)D1/D2 1 2 1 3 4 ADL2.5(E)D1 ADLG2.5 2 3 4 ADL2.5(E)D2 3 Connection Feed-Through 2 Jumper Slots Double Level with built-in Diode for circuit protection Double Level with additional snap-on grounding connection Width 8 mm 5 mm 5 mm Length 74 mm 79.5 mm 83.7 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 49.5 mm 57 mm 57.5 mm 65 mm 64.8 mm 72.3 mm 18.6 g 14.0 g 20.9 g Dimensions & Weight Weight per piece Technical Data/Ratings Approvals E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 22-8 AWG E220514 E220514 60947-7-1 60947-7-1 0.2-6 mm2 22-12 AWG 0.34-2.5 mm2 22-12 AWG 0.34 mm2 Voltage Range 600 V 800 V 300 V 800 V 600 V 800 V Current Rating 50 A 41 A 25 A 24 A 20 A 24 A Polyamide 66 Insulation Material Polyamide 66 Polyamide 66 Installation Instructions 15 mm 11 mm 10 mm Flat Head 0.8 x 4 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Std. Pk. Grey (standard) AS6/3 50 Red Blue Black Orange Green Yellow White AS6/3/R AS6/3/BU AS6/3/BL AS6/3/O AS6/3/G AS6/3/Y AS6/3/W 50 50 50 50 50 50 50 R BU BL O G Y W Accessories 50 50 Cat. No. ADLG2.5 Yellow/Green 50 Std. Pk. Cat. No. Std. Pk. 50 EPADL2.5 50 EPADLG2.5 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA103 CA702 CA802 50 50 50 CA103 CA702 CA802 50 50 50 CA103 CA702 CA802 50 50 50 Jumpers Adjacent CA801/3 100 CA801/1 100 – – Jumpers Alternate CA801/3-3 100 CA801/1-3 100 – – Push in wire jumper CA901/3 100 CA901/1 100 – – CA901/4 CA901/5 – CA801/8 100 100 – 100 – CA901/5 CA901/6 CA901/8 – 100 100 100 – – – – – – – – AS6 to AS4 AS6 to AS2.5 AS4 to AS2.5 AS6 to AS2.5 MT8 1 Pk. (100 tags) MT5 1 Pk. (100 tags) Cat. No. Std. Pk. EPAS6 Marking Tag 82 ADL2.5(E)D1 ADL2.5(E)D2 Std. Pk. End Plate Step Down Jumper Cat. No. Cat. No. MT2G Std. Pk. 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 ANGULAR SERIES TRIPLE LEVEL ANGULAR SPRING CLAMP SPRING TERMINAL BLOCKS ATL2.5H ATLG2.5 Triple Level Spring Terminal Jumper Slot on each Level Triple Level with top level Feed-Through and mid/bottom level connections Triple Level with additional snap-on grounding connection Width 5 mm 5 mm 5 mm Length 100 mm 76.1 mm 100 mm Height w DIN Rail 35 x 7.5 mm 35 x 15 mm 75.0 mm 82.5 mm 75.0 mm 82.5 mm 75.0 mm 82.5 mm 19.4 g 12.2 g 23.6 g ATL2.5 Dimensions & Weight Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 22-12 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 500 V - 500 V 600 V 500 V 24 A - 24 A 20 A 24 A 22-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V Current Rating 20 A Insulation Material UL 60947-7-1 Polyamide 66 Polyamide 66 Polyamide 66 10 mm 10 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W ATL2.5 ATL2.5/R ATL2.5/BU ATL2.5/BL ATL2.5/O ATL2.5/G ATL2.5/Y ATL2.5/W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. ATL2.5H ATL2.5H/R ATL2.5H/BU ATL2.5H/BL ATL2.5H/O ATL2.5H/G ATL2.5H/Y ATL2.5H/W Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. ATLG2.5 Yellow/Green Std. Pk. 100 Cat. No. Std. Pk. End Plate EPATL2.5 50 EPATL2.5H 50 EPATLG2.5 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 End Stop CA702 CA802 CA202 CA103 50 50 50 50 CA702 CA802 CA202 CA103 50 50 50 50 CA702 CA802 CA202 CA103 50 50 50 50 CA801/A2 CA801/A3 CA801/A4 CA801/A10 100 100 100 10 CA801/A2 CA801/A3 CA801/A4 CA801/A10 100 100 100 10 CA801/A2 CA801/A3 CA801/A4 CA801/A10 100 100 100 10 Push In Jumpers Marking Tag 2 pole 3 pole 4 pole 10 pole MT2G 1 Pk. (100 tags) Cat. No. MT2G Std. Pk. 1 Pk. (100 tags) Cat. No. MT2G Std. Pk. 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 83 ANGULAR SERIES GROUND / EARTH ANGULAR SPRING CLAMP SPRING TERMINAL BLOCKS AGT2.5 AGT4 2 Connection Ground Terminal Feed-Through 2 Connection Ground Terminal Feed-Through 2 Connection Ground Terminal Feed-Through 3 Connection Ground Terminal Feed-Through Width 5 mm 6 mm 8 mm 5 mm Length 54 mm 61.5 mm 74 mm 54 mm 49.5 mm 57 mm 49.5 mm 57 mm 55.5 mm 63 mm 49.5 mm 57 mm 13.5 g 12.0 g 19.0 g 14.5 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece AGT2.5/3 AGT6 Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 22-12 AWG 0.34-2.5 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-6 mm2 22-12 AWG 0.34-2.5 mm2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating - - - - - - - - CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 11 mm 15 mm 15 mm 12 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.5 x 3 mm Insulation Material Installation Instructions Wire Stripping Length Screwdriver 84 Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green AGT2.5 100 AGT4 100 AGT6 50 Accessories Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS4 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 Marking Tag MT5 1 Pk. (100 tags) Cat. No. MT6 Std. Pk. 1 Pk. (100 tags) Cat. No. Cat. No. AGT2.5/3 Std. Pk. 100 Std. Pk. Cat. No. Std. Pk. EPAS6 50 EPAS2.5 50 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 MT8 1 Pk. (100 tags) MT5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) ANGULAR SERIES GROUND / EARTH ANGULAR SPRING CLAMP AGT2.5/4 SPRING TERMINAL BLOCKS AGT4/3 AGT4/4 AGT6/3 4 Connection Ground Terminal Feed-Through 3 Connection Ground Terminal Feed-Through 4 Connection Ground Terminal Feed-Through 3 Connection Ground Terminal Feed-Through Width 5 mm 6 mm 6 mm 8 mm Length 54 mm 61.5 mm 61.5 mm 74 mm 44.0 mm 51.6 mm 44.0 mm 51.6 mm 44.0 mm 51.6 mm 49.3 mm 57.0 mm 15.5 g 14.5 g 18.6 g 22.0 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 E220514 60947-7-1 E220514 60947-7-1 22-12 AWG 0.34-2.5 mm 22-10 AWG 0.2-4 mm 22-10 AWG 0.2-4 mm 22-8 AWG 0.2-6 mm2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating - - - - - - - - Insulation Material 2 Polyamide 66 2 Polyamide 66 2 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks 12 mm 15 mm 15 mm 15 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. 100 AGT4/3 100 AGT4/4 50 AGT6/3 100 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS4 50 EPAS4 50 EPAS6 50 DIN Rail 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 2511120 CA701-15/S 20 20 Marking Tag MT5 Yellow/Green Accessories Cat. No. AGT2.5/4 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 1 Pk. (100 tags) 85 ACCESSORIES JUMPERS / SHORTING LINKS SPRING TERMINAL BLOCKS CX SERIES Push-In Technology Multipole Jumpers Terminal Block Series Poles 2 Pole 3 Pole 4 Pole 5 Pole 6 Pole 7 Pole 8 Pole 10 Pole Cat. No. JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 Std. Pk. 100 50 50 50 10 10 10 10 CX4 Series CXG4 Series CXF4 CXCC4 CXS4 2 Pole 3 Pole 4 Pole 8 Pole 10 Pole 16 Pole JX4/2 JX4/3 JX4/4 JX4/8 JX4/10 JX4/16 100 50 50 10 10 10 CX6 Series CXG6 Series CXDB35/10 2 Pole 3 Pole 4 Pole 10 Pole JX6/2 JX6/3 JX6/4 JX6/10 100 50 50 10 CX10 Series CXG10 Series 2 Pole JX10/2 20 CX2.5 Series CXG2.5 Series CXDL2.5 CXK2.5 CXS2.5 Easy Breakout Felt-Tip Marking 2 Jumper Channels ANGULAR SERIES Push-In Wire Jumper 2 Pole Adjectant Jumper Alternate Jumper Push-In Wire Jumper Alternate Jumper Terminal Block Series AS2.5 / ADL2.5 Series AS4 Series AS6 Series Cat. No. CA801/1 CA801/2 CA801/3 Std. Pk. 100 100 100 Cat. No. CA801/1-3 CA801/2-3 CA801/3-3 Std. Pk. 100 100 100 Cat. No. CA901/1 CA901/2 CA901/3 Std. Pk. 100 100 100 STEP DOWN JUMPERS Used for jumpering terminal blocks of different sizes. CX SERIES Jumper for CX10 to CX2.5 CX6 to CX2.5 CX10 to CX4 CX6 to CX4 86 ANGULAR SERIES Cat. No. JXS10/2.5 JXS6/2.5 JXS10/4 JXS6/4 Std. Pk. 50 50 50 50 Jumper for AS6 to AS2.5 AS6 to AS4 AS4 to AS2.5 Cat. No. CA901/5 CA901/4 CA901/6 Std. Pk. 100 100 100 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 2 Pole Adjectant Jumper ACCESSORIES ENDPLATES SPRING TERMINAL BLOCKS ANGULAR SERIES CX SERIES Terminal Block Cat. No. Dimensions Std. Pk. CX2.5 CXG2.5 EPCX2.5 30.5 x 49.7 x 1.5mm 50 CX4 CXG4 EPCX4 CX6 CXG6 EPCX6 35.3 x 62.1 x 1.5mm 50 CX10 CXG10 EPCX10 41.6 x 70 x 1.5mm 50 CX2.5/3 CXG2.5/3 CXK2.5 EPCX2.5/3 30.5 x 62.2 x 1.5mm 50 CX2.5/4 CXG2.5/4 EPCX2.5/4 30.5 x 74.7 x 1.5mm 50 CX4/3 CXG4/3 CXK4 EPCX4/3 30.5 x 70.5 x 1.5mm 50 CX4/4 CXG4/4 EPCX4/4 30.5 x 86.2 x 1.5mm 50 CX6/3 CXG6/3 EPCX6/3 CX10/3 CXG10/3 EPCX10/3 30.5 x 54.8 x 1.5mm 35.3 x 82.2 x 1.5mm 50 Dimensions Std. Pk. AS2.5 AS2.5/XX AGT2.5 AGT2.5/XX EPAS2.5 35 x 54 x 1.5mm 50 AS4 AS4/XX AGT4 AGT4/XX EPAS4 27.5 x 61 x 1.5mm 50 AS6 AS6/XX AGT6 AGT6/XX EPAS6 33.5 x 74 x 1.5mm 50 ADL2.5 EPADL2.5 43.5 x 80 x 1.5mm 50 ADLG2.5 EPADLG2.5 83.7 x 58 x 1.2mm 50 ATL2.5 EPATL2.5 100 x 69.7 x 1.2mm 50 ATL2.5H EPATL2.5H 77.3 x 69.7 x 1.2mm 50 ATLG2.5 EPATLG2.5 100 x 68.7 x 1.2mm 50 END STOPS 41.6 x 95.3 x 1.5mm CA103 50 Screwless Snap On EPCXDL2.5 41.8 x 72.7 x 1.5mm 50 CXS2.5 EPCXS2.5 35.6 x 43 x 1.5mm 50 CXS4 EPCXS4 Cat. No. Dimensions Std. Pk. CA103 35 x 41 x 6mm 50 50 PARTITION PLATES CA802 CA702 Cat. No. Dimensions Std. Pk. CA802 32 x 45 x 8mm 50 Cat. No. Dimensions Std. Pk. CA702 34 x 45 x 9mm 50 TEST PLUGS CX SERIES Terminal Block Cat. No. CX2.5, CXG2.5 CX4, CXG4 PPCX4 CX2.5/3, CXG2.5/3 CX4/3, CXK2.5 CX6, CX10 Cat. No. 50 CXDL2.5 CXDLG2.5 CX2.5/4, CXG2.5/4 CX4/4, CXK4/4 Terminal Block Dimensions Std. Pk. 42.4 x 59 x 2mm 50 PPCX4/3 42.4 x 74.7 x 2mm 50 PPCX4/4 42.4 x 95 x 2mm 50 PPCX6 53.5 x 76 x 1mm 50 Terminal Block CX2.5, CXG2.5, CXDL2.5, CXG4, CXM2.5, CXMG2.5 Cat. No. Std. Pk. TX2.5 20 CX4, CXG4, CX7, CXG6 TX4 20 CX6, CXDB TX6 20 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 87 OVERVIEW INTRODUCTION MINI / PANEL MOUNT TERMINALS SCREW CLAMP TECHNOLOGY • Screw clamp & Spring Clamp Technology versions • Extremely Compact wiring solution • 15mm Mini Rail Terminals • Modular easy snap together Panel Mount Terminals • High Temperature Ceramic Solution • Reliable Gas-tight connection E220514 60947-7-1 MATERIAL SPECIFICATIONS Current Carrying Metal Screw Terminals Corrosion free material Spring Terminals Corrosion free material • Clamp: Zinc Plated Steel • Screw: Steel • Current Bar: Brass/ Tin Plated Copper • Spring: Stainless Steel • Current Bar: Copper Alloy Terminal Block Housing • Polyamide PA66 Housing • Self-extinguishing • High mechanical strength Polyamide 66 Specifications Upper Temperature Limit: 105°C Lower Temperature Limit: -50°C Flammability UL94: V2/ V0 Volume Resistivity: 1012 Ω cm Surface Resistivity: 1010 Ω SELECTION GUIDE Screw Terminal Blocks • Extremely Compact size • Various mounting options • 15mm Mini Rail • Panel Mount • Modular system • Jumper Accessories • Screw Clamp Technology 15mm Mini Rail CMT4 Panel Mount CMB4 page 89 page 90 Spring Clamp Terminal Blocks • Extremely Compact size • Various mounting options • 15mm Mini Rail • Panel Mount • Modular Snap together Systems • Spring Clamp Technology 15mm Mini Rail CXM2.5 Panel/DIN Rail CSCP Series Panel Mount CM Series page 91 page 92 page 93 High Temperature Ceramic Terminal Blocks • • • • • 88 High Temperatures up to 600°C Ceramic Material 3 sizes Up to 65A/ 300V Free floating or mounting hole option High Temperature CB Series page 94 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 MINI RAIL CMT SERIES MINI RAIL SCREW TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CF4U CGMT4 CMT4 HIGHLIGHTS FEATURES • Extremely Compact Size • Screw Cage Clamp • Mountable on DIN15 2 Connection Feed-Through Internal Jumper Provision 2 Connection Ground Terminal Internal Jumper Provision 5 x 20 mm Fuse Terminal Width 6 mm 6 mm 8 mm Length 27 mm 27 mm 57.0 mm 30.4 mm 30.7 mm 50.3 mm | 57.6 mm 5.5 g 9.5 g 14.8 g Dimensions & Weight Height w DIN15 Rail 15mm Weight per piece • • • • Technical Data/Ratings Approvals E220514 Wire Size (solid / stranded) 60947-7-1 60947-7-1 E220514 60947-7-3 E220514 22-10 AWG 0.2-4 mm 22-10 AWG 0.2-4 mm 22-10 AWG 0.2-4 mm Voltage Rating 300 V 500 V AC/DC 300 V 500 V AC/DC 600 V 800 V AC/DC Current Rating 35 A 32 A - - 10 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.8 Nm 7 lb-in 0.5 Nm Insulation Material 2 2 Mini Rail Feed Through Terminal Ground Terminal Internal Jumper possibility EX / IECEx approved APPLICATIONS • Limited Space Panels • High Density Wiring Solutions 2 Polyamide 66 Polyamide 66 Polyamide 66 8 mm 8 mm 9.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CMT4 CMT4/R CMT4/BU CMT4/BL CMT4/O CMT4/G CMT4/Y CMT4/W Accessories Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CGMT4 Yellow/Green Std. Pk. 100 Cat. No. CF4U CF4U/BU CF4U/BL Std. Pk. 50 50 50 Cat. No. Std. Pk. End Plate EPCMT4 50 – – – – Isolation Partition PPCMT4 50 – – – – CA601/S 50 CA601/S 50 CA601/S 50 CA602 100 CA602 100 – – DIN Rail 15mm End Clamp Cat. No. Std. Pk. Cat. No. Std. Pk. Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 – – – – – – – – – – – – – – – – Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 100 100 10 – – – – – – – – – – – – – – – – External Jumper 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA714/2 CA714/3 CA714/4 CA714/10 Test Socket CA707/TS/03 100 CA707/TS/03 Marking Tag MT2 1 Pk. (100 tags) MT2 100 100 100 20 – 1 Pk. (100 tags) CA711/2 CA711/3 CA711/4 CA711/10 – MT8 MT6 100 50 50 20 – 1 Pk. (100 tags) 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 89 PANEL MOUNT CMB SERIES PANEL MOUNT SCREW TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CMB4 HIGHLIGHTS FEATURES • Extremely Compact Size • Screw Cage Clamp • Panel Mountable with any length M3 screw • End / Mounting Section with M3 mounting holes • Stackable design for flexible length configurations • Modular snap-together design for quick assembly and installation • Endplates with mounting holes • Internal Jumper possibility • EX / IECEx approved • Pre-assembled Blocks available in all pole configurations and various colors APPLICATIONS • Cost Effective Wiring 2 Connection Feed Through Dimensions & Weight Pre-assembled Terminal Blocks Width 6 mm Length 27 mm Height 28 mm Weight per piece 5.5 g Technical Data/Ratings Approvals 22-10 AWG 0.2-4 mm2 300 V 500 V AC/DC Voltage Rating Current Rating 35 A 32 A Torque 7 lb-in 0.5 Nm Insulation Material Solutions • Compact Wiring Solutions • Panel Mount Designs • High Density Wiring 60947-7-1 E220514 Wire Size (solid / stranded) Polyamide 66 Installation Instructions Wire Stripping Length 8 mm Screwdriver Flat Head 0.6 x 3.5mm Mounting Screw Any length M3 screw may be used Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CMB4 CMB4/R CMB4/BU CMB4/BL CMB4/O CMB4/G CMB4/Y CMB4/W Accessories 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. EPCMB4 50 Separator Plate SPCMB4 50 Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 100 100 10 External Jumper 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 CA707/TS/01 Marking Tag MT2 Cat. No CMB4/2 CMB4/3 CMB4/4 CMB4/5 CMB4/6 CMB4/7 CMB4/8 CMB4/9 CMB4/10 CMB4/11 CMB4/12 CMB4/13 CMB4/14 CMB4/15 CMB4/16 CMB4/17 CMB4/18 CMB4/19 CMB4/20 CMB4/21 CMB4/22 CMB4/23 CMB4/24 Total Width (a) 26 mm (1.02”) 32 mm (1.26”) 38 mm (1.50”) 44 mm (1.73”) 50 mm (1.97”) 56 mm (2.20”) 62 mm (2.44”) 68 mm (2.68”) 74 mm (2.91”) 80 mm (3.15”) 86 mm (3.39”) 92 mm (3.62”) 98 mm (3.86”) 104 mm (4.09”) 110 mm (4.33”) 116 mm (4.57”) 122 mm (4.80”) 128 mm (5.04”) 134 mm (5.28”) 140 mm (5.51”) 146 mm (5.75”) 152 mm (5.98”) 158 mm (6.22”) b a Dimensions CMB4 Mounting Section Dimensions EPCMB4 4 Pole Internal Jumper CA727/4 CMB4 Terminal Block 100 1 Pk. (100 tags) End / Mounting Section EPCMB4 90 Hole Spacing (b) 19 mm (0.75”) 25 mm (0.98”) 31 mm (1.22”) 37 mm (1.46”) 43 mm (1.69”) 49 mm (1.93”) 55 mm (2.17”) 61 mm (2.40”) 67 mm (2.64”) 73 mm (2.87”) 79 mm (3.11”) 85 mm (3.35”) 91 mm (3.58”) 97 mm (3.82”) 103 mm (4.06”) 109 mm (4.29”) 115 mm (4.53”) 121 mm (4.76”) 127 mm (5.00”) 133 mm (5.24”) 139 mm (5.47”) 145 mm (5.71”) 151 mm (5.94”) Std. Pk. End / Mounting Section Test Socket No. of Poles 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 MINI RAIL CXM SERIES MINI RAIL SPRING TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CXMG2.5 CXM2.5 CMS2.5 HIGHLIGHTS 2 Connection Feed Through 2 Jumper Channels 2 Connection Ground Terminal 2 Jumper Channels Side Entry Feed Through Width 5 mm 5 mm 5 mm Length 37 mm 37 mm 31 mm Height w DIN Rail 15 x 5.5 mm 35 mm 35 mm 30.15 mm 5.9 g 10.3 g 5.9 g Dimensions & Weight Weight per piece UL Technical Data/Ratings Approvals 60947-7-1 E220514 CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 Mini Rail • Feed Through Terminal • Ground Terminal • Side Entry Feed Through • 2, 3, 4, 5, 6, 7, 10 pole Push-In Jumpers • EX / IECEx approved 60947-7-1 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 300 V 800V AC/DC Current Rating 20 A 24 A - - 20 A 24 A Insulation Material FEATURES • Extremely Compact Size • Spring Clamp Style • Mountable on DIN 15 Polyamide 66 Polyamide 66 Polyamide 66 10 mm 10 mm 9 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm APPLICATIONS • Limited Space Panels • High Density Wiring Solutions • Machine Control Panels • High Vibration Applications Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Std. Pk. CXM2.5 CXM2.5/R CXM2.5/BU CXM2.5/BL CXM2.5/O CXM2.5/G CXM2.5/Y CXM2.5/W Accessories 100 100 100 100 100 100 100 100 Cat. No. End Plate DIN Rail 15mm End Clamp 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 10 pole Jumper Std. Pk. Cat. No. CXMG2.5 Yellow/Green Cat. No. Std. Pk. 100 Std. Pk. Cat. No. CMS2.5 CMS2.5/R CMS2.5/BU CMS2.5/BL CMS2.5/O CMS2.5/G CMS2.5/Y CMS2.5/W Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. EPCXM2.5 50 EPCXM2.5 50 EPCMS2.5 50 CA601/S 50 CA601/S 50 CA601/S 50 CA602 100 CA602 100 CA602 100 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 100 50 50 50 10 10 10 10 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/10 100 50 50 50 10 10 10 10 – – – – – – – – 1 SCA2-5 Spring Clamp Actuator SCA2-5 Marking Tag MT5 1 Pk. (100 tags) MT5 1 1 Pk. (100 tags) – MT5 – – – – – – – – – 1 Pk. (100 tags) Operating Tool for use with CXM2.5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 91 PANEL MOUNT CSCP SERIES PANEL MOUNT SPRING TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CSCP2.5T2 CSCP2.5T CXCP2.5/4 HIGHLIGHTS FEATURES • Extremely Compact Size • Screw Cage Clamp • Panel Mountable with any screw • Endplates with screw flange • Stackable design for flexible length configurations • Modular snap-together design for quick assembly and easy installation • External Jumper possibility • EX / IECEx approved • Custom assemblies available in all pole configurations and various colors 2 Connection Spring Terminal Panel Mount 4 Connection Spring Terminal Panel Mount 4 Connection Spring Terminal DIN Rail Mount Width 5 mm 10 mm 10 mm Length 35 mm 35 mm 35 mm 21.3 mm (Panel Mount) 21.3 mm (Panel Mount) 34.5 mm 42 mm 5.0 g 9.5 g 9.5 g Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 35 x 15 mm Weight per piece Technical Data/Ratings Approvals E220514 Wire Size (solid / stranded) APPLICATIONS • Cost Effective Panel Mount Designs • Limited Space Panels • High Density Wiring Solutions • Machine Control Panels • High Vibration Applications Custom Assembly Example E220514 60947-7-1 E220514 60947-7-1 22-14 AWG 0.2-2.5 mm 22-14 AWG 0.2-2.5 mm 22-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating 20 A 24 A 20 A 24 A 20 A 24 A Insulation Material 2 2 Polyamide 66 Polyamide 66 Polyamide 66 11 mm 11 mm 10 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Any length M3 screw may be used Any length M3 screw may be used – Installation Instructions Wire Stripping Length Screwdriver Mounting Screw Terminal Blocks Operating Tool for use with CSCP2.5T2 60947-7-1 Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W Accessories Cat. No. Std. Pk. CSCP2.5T CSCP2.5T/R CSCP2.5T/BU CSCP2.5T/BL CSCP2.5T/O CSCP2.5T/G CSCP2.5T/Y CSCP2.5T/W Cat. No. Cat. No. 100 100 100 100 100 100 100 100 CSCP2.5T2 CSCP2.5T2/R CSCP2.5T2/BU CSCP2.5T2/BL CSCP2.5T2/O CSCP2.5T2/G CSCP2.5T2/Y CSCP2.5T2/W Std. Pk. Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. Cat. No. Std. Pk. CXCP2.5/4 CXCP2.5/4/R CXCP2.5/4/BU CXCP2.5/4/BL CXCP2.5/4/O CXCP2.5/4/G CXCP2.5/4/Y CXCP2.5/4/W 100 100 100 100 100 100 100 100 Cat. No. Std. Pk. End Section EPCSCP2.5T 25 EPCSCP2.5T 25 EPCXCP2.5 25 Insulated Jumpers (2 pole) CA803/1 100 CA803/1 100 CA803/1 100 Marking Tag MT4 Operating Tool SCA2-5 1 Pk. (100 tags) 1 MT3 SCA2-5 PANEL MOUNT 1 Pk. (100 tags) 1 MT3 1 Pk. (100 tags) SCA2-5 1 DIN RAIL MOUNT CSCP2.5T2 CSCP2.5T2 EPCSCP2.5T EPCSCP2.5T CSCP2.5T CSCP2.5T SCREW FLANGE 92 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 CXCP2.5/14 DIN Rail Mounting Foot MICRO CM SERIES MICRO PANEL MOUNT SPRING TERMINAL BLOCKS CM1.5S MINI / PANEL MOUNT TERMINALS CM2.5S CM4S HIGHLIGHTS CM1.5S CM1.5S2 CM2.5S CM4S CM2.5S2 CM4S2 FEATURES • Extremely Compact Size • Spring Clamp Style • End Sections with screw • • • CM1.5S2 CM2.5S2 CM4S2 APPLICATIONS • Transformer Terminal Dimensions Width 2 Connection 4 Connection flanges 3 wire sizes 2, 4 connection terminals All colors • 5 mm 8 mm 6 mm 10 mm 7 mm 12 mm Length 26.5 mm 30.0 mm 33.7 mm Height (Panel Mount) 18.0 mm 20.0 mm 23.0mm Weight per piece 1.8 / 3.8 g 3.2 / 5.2 g g • Blocks Very Limited Space Applications Machine Control Panels Technical Data/Ratings Approvals CB SCHEME Wire Size (solid / stranded) 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 24-16 AWG 0.2-1.5 mm2 22-12 AWG 0.2-2.5 mm2 22-14 AWG 0.2-4 mm2 Voltage Rating 300 V 500V AC/DC 300 V 500V AC/DC 300 V 630V AC/DC Current Rating 10 A 17 A 20 A 24 A 26 A 32 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 8 mm 9 mm 8 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Installation Instructions Wire Stripping Length Screwdriver Terminal Blocks Cat. No. 2 Connections Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CM1.5S CM1.5S/R CM1.5S/BU CM1.5S/BL CM1.5S/O CM1.5S/G CM1.5S/Y CM1.5S/W Cat. No. 4 Connections Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CM1.5S2 CM1.5S2/R CM1.5S2/BU CM1.5S2/BL CM1.5S2/O CM1.5S2/G CM1.5S2/Y CM1.5S2/W Accessories Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. Cat. No. CM2.5S CM2.5S/R CM2.5S/BU CM2.5S/BL CM2.5S/O CM2.5S/G CM2.5S/Y CM2.5S/W Cat. No. CM2.5S2 CM2.5S2/R CM2.5S2/BU CM2.5S2/BL CM2.5S2/O CM2.5S2/G CM2.5S2/Y CM2.5S2/W Cat. No. Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. 100 100 100 100 100 100 100 100 Cat. No. CM4S CM4S/R CM4S/BU CM4S/BL CM4S/O CM4S/G CM4S/Y CM4S/W Cat. No. CM4S2 CM4S2/R CM4S2/BU CM4S2/BL CM4S2/O CM4S2/G CM4S2/Y CM4S2/W Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. 100 100 100 100 100 100 100 100 Std. Pk. Cat. No. Std. Pk. End Plate EPCM1.5S 50 EPCM2.5S 50 EPCM4S 50 Spring Clamp Actuator SCA2-5 1 SCA2-5 1 SCA2-5 1 MT4 MT7.5 1 Pk. (100 tags) 1 Pk. (100 tags) MT2 MT7.5 1 Pk. (100 tags) 1 Pk. (100 tags) Marking Tag 2 Connection 4 Connection MT6 MT12 1 Pk. (100 tags) 1 Pk. (100 tags) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 93 EUROBLOCKS ™ HIGH TEMPERATURE CERAMIC EUROBLOCKSTM PANEL MOUNT TERMINALS CB4 CB6 CB16 HIGHLIGHTS FEATURES • Suitable for High Technical Data/Ratings Temperatures up to 600°C (1112°F) • Temperature Rating -40°C - 600°C • 3 Sizes • 1, 2, 3, 4 Pole configurations • Free floating or Panel Mount • Up to 65A • Material: • Housing: Steatite • Clamp: Brass • Screws: Zinc Plated Steel Approvals E220514 Wire Size (solid / stranded) 22-10 AWG 22-10 AWG 60947-7-1 18-6 AWG 20-6 AWG 0.5-2.5mm2 300 V 300 V 800 VAC/DC 300 V 300 V 800 VAC/DC 300 V 300 V 800 VAC/DC 20 A 30 A 24 A 30 A 40 A 32 A 65 A 76 A 57 A Torque 6 lb-in 6 lb-in 0.4 Nm 6 lb-in 6 lb-in 0.5 Nm 12 lb-in 12 lb-in 1.2 Nm Ceramic Ceramic Ceramic 8 mm 8 mm 8 mm Wire Stripping Length Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Mounting Hole Size 3.5 mm 3.5 mm 3.5 mm Recommended Mounting Screw M3 x 16 M3 x 16 M3 x 20 Terminal Blocks 1 pole 2 pole 3 pole free floating free floating with mounting holes free floating with mounting holes with mounting holes Cat. No. Std. Pk. Weight 50 50 50 50 50 - 11.7 g 18.0 g 26.1 g 30.1 g 42.3 g - CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H - Cat. No. Weight Std. Pk. CB6/1 CB6/2H CB6/3H CB6/4H 50 50 50 50 13.5 g 27.3 g 42.5 g 29.1 g Cat. No. Std. Pk. Weight CB16/2H CB16/3H - 50 50 - 47.2 g 44.6 g - (All dimensions are shown in mm, to convert to inches please divide by 25.4) CB4/1 CB6/1 25.5 11 CB4/2H 14.6 23 12 19.5 CB6/2H 26 31 6 6 6 19.5 15 7.3 17 CB6/3H CB16/3H 13 15 17 28 25.5 36 6 6 3.5 39 48 6 6 15 3.5 6 6 16 23.2 19.5 13 CB6/4H 20 41 6 18.5 7.3 3.5 CB4/3H 25 18.5 18.5 3.5 23 23 18 23.2 13 23 CB4/2 16.5 28 24 18.5 CB4/3 CB16/2H 12.6 25.5 3.5 94 0.5-4mm2 Current Rating 4 pole 18.5 E220514 60947-7-1 Voltage Rating Insulation Material Environments • Furnaces • Heaters • Process Equipment • Machinery 23 24-12 AWG 24-12 AWG 0.5-2.5mm2 Installation Instructions APPLICATIONS • High Temperature Dimensions E220514 60947-7-1 17 8 3.5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 3.5 EUROSTRIPS® OVERVIEW TERMINAL STRIPS SCREW CLAMP CONNECTION TECHNOLOGY • Quick and Efficient Wire-to-Wire connection solution • Safe, Gas-tight connection • Modern Replacement for traditional Double-Row • Reliable connection utilizing a precision Barrier Style Terminal Blocks machined tubular screw clamp insert • Touch-proof design to eliminate shorts • Accessories for convenient wire installation • Available in 12 poles or precut to required number and usage of poles • Easy to cut to length by using hacksaw E211022 60998-2-1 or utility knife SELECTION GUIDE HE SERIES with wire protector MATERIAL SPECIFICATIONS Current Carrying Metal Corrosion free material Insert • Insert: Tinned Brass • Screw: Blue chromated steel • Wire protector: Stainless Steel Terminal Block Housing • Polyamide PA66 Housing • Self-extinguishing • High mechanical strength Polyamide 66 Specifications Upper Temperature Limit: 125°C Lower Temperature Limit: -30°C Flammability UL94: V0 Wire Protector HE Series Flat Base 300V page 96-97 HEH Series Standoff Feet 600V page 98-99 HE42 Series Pluggable 300V, 600V page 100-101 ATS SERIES with wire protector - Center Barrier MATERIAL SPECIFICATIONS Terminal Block Housing • Polyamide PA66 Housing • Self-extinguishing Insert: Nickel-plated copper alloy • High mechanical strength Screw: yellow chromated steel Wire protector: Stainless Steel Middle Barrier: Stainless Steel Current Carrying Metal Corrosion free material • • • • Insert Center Barrier Polyamide 66 Specifications Upper Temperature Limit: 125°C Lower Temperature Limit: -30°C Flammability UL94: V0 Wire Protector ATS Series Flat Base 300V page 102 ATSF Series Standoff Feet 600V page 103 ACCESSORIES Jumpers, Separation Plates, Marking Pins, Imprinting page 104-105 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 95 EUROSTRIPS ® FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR TERMINAL STRIPS HE1 HE4 HIGHLIGHTS FEATURES • 300V up to 63A • Cost effective reliable Dimensions & Weight wire-to-wire solution • Easy to use double-row • • • • • • terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock Color: white APPLICATIONS • HVAC • Appliances • Equipment • Power Distribution • Junction Boxes • Cost effective alternative to barrier strips Pitch Spacing 8 mm 10 mm Weight per piece (12 pole) 16.2 g 31.6 g Technical Data/Ratings Approvals E211022 Wire Size (solid / stranded) E211022 60998-2-1 24-10 AWG 2.5-4 mm2 60998-2-1 2 24-12 AWG 1-2.5 mm Voltage Rating 300 V 400 V 300 V 400 V Current Rating 20 A 6A 30 A 10 A 4.4 lb-in 0.35 Nm 7.0 lb-in 0.4 Nm Torque Insulation Material Polyamide 66/6 V0 Insert Material Terminal Screw Material Polyamide 66/6 V0 Tinned Brass Tinned Brass Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length Mounting Hole Diameter Terminal Screw Size Terminal Strips 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole Accessories 2 pole 3 pole 4 pole 12 pole External Jumpers Marking Plates Blank No. 1-12 No. 13-24 5 mm 6 mm 3.0 mm 3.6 mm M2.6 M3 Cat. No. Length Std. Pk. HE1WPR/02 HE1WPR/03 HE1WPR/04 HE1WPR/05 HE1WPR/06 HE1WPR/07 HE1WPR/08 HE1WPR/09 HE1WPR/10 HE1WPR/11 HE1WPR/12 13.2 mm 21.2 mm 29.2 mm 37.2 mm 45.2 mm 53.2 mm 61.2 mm 69.2 mm 77.2 mm 85.2 mm 93.2 mm 100 100 100 100 50 50 50 50 50 50 50 Cat. No. Std. Pk. HCL8-2 HCL8-3 HCL8-4 HCL8-12 – – – 100 100 100 25 – – – Cat. No. Length Std. Pk. HE4WPR/02 HE4WPR/03 HE4WPR/04 HE4WPR/05 HE4WPR/06 HE4WPR/07 HE4WPR/08 HE4WPR/09 HE4WPR/10 HE4WPR/11 HE4WPR/12 16.4 mm 26.4 mm 36.4 mm 46.4 mm 56.4 mm 66.4 mm 76.4 mm 86.4 mm 96.4 mm 106.4 mm 116.4 mm 100 100 100 100 50 50 50 50 50 50 50 Cat. No. Std. Pk. HCL10-2 HCL10-3 HCL10-4 HCL10-12 BS24E BS24EM1-12 BS24EM13-24 HE1 DIMENSIONS 100 100 100 25 25 25 25 HE4 DIMENSIONS 8 mm 10 mm M2.6 Ø3 mm Mounting Hole Ø2.8 mm Ø5.7 mm 16.2 mm 10 mm Ø3.6 M3 8.5 mm 14.9 mm 6.5 mm 3.2 mm 2.8 mm 8 mm L Ø3.6 mm Mounting Hole 12.2 mm M2.6 Ø5 mm 3.5 mm 6.4 mm 7.9 mm 2.8 mm 6.5 mm 5.2 mm M3 20 mm L (All dimensions are shown in mm, to convert to inches please divide by 25.4) 96 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 EUROSTRIPS ® FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR TERMINAL STRIPS HE6 HE10 HE16 Pitch Spacing 12 mm 15 mm 15 mm Weight per piece (12 pole) 47.0 g 95.5 g 94.5 g Dimensions & Weight Technical Data/Ratings Approvals E211022 Wire Size (solid / stranded) 20-10 AWG 4-6 mm Voltage Rating 300 V Current Rating 40 A 7.0 lb-in Torque Insulation Material E211022 60998-2-1 2 Terminal Screw Material 2 60998-2-1 18-6 AWG 10-16 mm2 18-8 AWG 6-10 mm 400 V 300 V 400 V 300 V 400 V 16 A 50 A 25 A 63 A 35 A 0.55 Nm 10.6 lb-in 0.84 Nm 17.7 lb-in 1.4 Nm Polyamide 66/6 V0 Insert Material E211022 60998-2-1 Polyamide 66/6 V0 Polyamide 66/6 V0 Tinned Brass Tinned Brass Tinned Brass Blue Chromated Steel Blue Chromated Steel Blue Chromated Steel Installation Instructions 7 mm 8.5 mm 8.5 mm 4.2 mm 4.5 mm 4.5 mm M3.5 M4 M5 Terminal Screw Size Terminal Strips Cat. No. 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole HE6WPR/02 HE6WPR/03 HE6WPR/04 HE6WPR/05 HE6WPR/06 HE6WPR/07 HE6WPR/08 HE6WPR/09 HE6WPR/10 HE6WPR/11 HE6WPR/12 Accessories Std. Pk. 100 100 100 100 50 50 50 50 25 25 25 2 pole 3 pole 4 pole 12 pole HCL12-2 HCL12-3 HCL12-4 HCL12-12 BS60E BS60EM1-12 BS60EM13-24 Blank No. 1-12 No. 13-24 100 100 100 25 25 25 25 HE6 DIMENSIONS Cat. No. HE10WPR/02 HE10WPR/03 HE10WPR/04 HE10WPR/05 HE10WPR/06 HE10WPR/07 HE10WPR/08 HE10WPR/09 HE10WPR/10 HE10WPR/11 HE10WPR/12 Std. Pk. Cat. No. External Jumpers Marking Plates Length 19.8 mm 31.8 mm 43.8 mm 55.8 mm 67.8 mm 79.8 mm 91.8 mm 103.8 mm 115.8 mm 127.8 mm 139.8 mm Length Std. Pk. 24.2 mm 39.2 mm 54.2 mm 69.2 mm 84.2 mm 99.2 mm 114.2 mm 129.2 mm 144.2 mm 159.2 mm 174.2 mm 50 50 50 50 25 25 25 25 10 10 10 Cat. No. Std. Pk. HCL15-2 HCL15-3 HCL15-4 HCL15-12 BS1016E BS1016EM1-12 BS1016EM13-24 100 100 100 25 25 25 25 Cat. No. HE16WPR/02 HE16WPR/03 HE16WPR/04 HE16WPR/05 HE16WPR/06 HE16WPR/07 HE16WPR/08 HE16WPR/09 HE16WPR/10 HE16WPR/11 HE16WPR/12 50 50 50 50 25 25 25 25 10 10 10 Std. Pk. HCL15-2 HCL15-3 HCL15-4 HCL15-12 BS1016E BS1016EM1-12 BS1016EM13-24 100 100 100 25 25 25 25 HE16 DIMENSIONS 15 mm M3.5 Std. Pk. Cat. No. HE10 DIMENSIONS 12 mm Length 24.2 mm 39.2 mm 54.2 mm 69.2 mm 84.2 mm 99.2 mm 114.2 mm 129.2 mm 144.2 mm 159.2 mm 174.2 mm 15 mm M5 M4 5.7 mm M3.5 9.3 mm 9.5 mm 11.3 mm Ø8.2 4.8 mm 16.8 mm 8.9 mm 4.0 mm L Ø4.1 mm 22.6 mm 15 mm L Ø5 mm 11.3 mm M4 Ø6.3 mm 12 mm M5 Ø8.2 21.9 mm 7.7 mm Ø4.5 9.3 mm Ø4.5 4.8 mm 5.7 mm Ø4.2 mm 11.6 mm 4.3 mm 15 mm 25.1 mm L Ø5.6 mm 21.9 mm Mounting Hole Diameter 11.6 mm Wire Stripping Length 25.1 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 97 EUROSTRIPS ® STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR TERMINAL STRIPS HE1H HE4HN HIGHLIGHTS FEATURES • 600V up to 63A • Cost effective reliable Dimensions & Weight • • APPLICATIONS • HVAC • Appliances • Equipment • Power Distribution • Junction Boxes • Cost effective alternative to barrier strips 10 mm Weight per piece (12 pole) 17.2 g 33.0 g Technical Data/Ratings Approvals E211022 Wire Size (solid / stranded) 60998-2-1 2 E211022 60998-2-1 24-10 AWG 2.5-4 mm2 24-12 AWG 1-2.5 mm Voltage Rating 600 V 500 V 600 V 500 V Current Rating 20 A 6A 30 A 10 A 4.4 lb-in 0.35 Nm 7.0 lb-in 0.4 Nm Torque Insulation Material Polyamide 66/6 V0 Polyamide 66/6 V0 Insert Material Tinned Brass Tinned Brass Screw Material Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length Mounting Hole Diameter Terminal Screw Size Terminal Strips 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole Accessories 2 pole 3 pole 4 pole 12 pole External Jumpers Marking Plates Blank No. 1-12 No. 13-24 5 mm 6 mm 3.0 mm 3.6 mm M2.6 M3 Cat. No. Length Std. Pk. HE1HWPR/02 HE1HWPR/03 HE1HWPR/04 HE1HWPR/05 HE1HWPR/06 HE1HWPR/07 HE1HWPR/08 HE1HWPR/09 HE1HWPR/10 HE1HWPR/11 HE1HWPR/12 13.2 mm 21.2 mm 29.2 mm 37.2 mm 45.2 mm 53.2 mm 61.2 mm 69.2 mm 77.2 mm 85.2 mm 93.2 mm 100 100 100 100 50 50 50 50 50 50 50 Cat. No. Length Std. Pk. HE4HNWPR/02 16.4 mm HE4HNWPR/03 26.4 mm HE4HNWPR/04 36.4 mm HE4HNWPR/05 46.4 mm HE4HNWPR/06 56.4 mm HE4HNWPR/07 66.4 mm HE4HNWPR/08 76.4 mm HE4HNWPR/09 86.4 mm HE4HNWPR/10 96.4 mm HE4HNWPR/11 106.4 mm HE4HNWPR/12 116.4 mm Cat. No. Std. Pk. HCL8-2 HCL8-3 HCL8-4 HCL8-12 – – – 100 100 100 25 – – – 100 100 100 100 50 50 50 50 50 50 50 Cat. No. Std. Pk. HCL10-2 HCL10-3 HCL10-4 HCL10-12 BS24E BS24EM1-12 BS24EM13-24 100 100 100 25 25 25 25 Isolation Partition – – HEP4/6H 5 Mounting Pins – – H4 50 HE1H DIMENSIONS HE4HN DIMENSIONS 8 mm 10 mm M2.6 Ø3 mm Mounting Hole Ø5 mm Ø2.8 mm L 3.5 mm M2.6 Ø3.6 Mounting Hole M3 16 mm Ø5.7 mm 10.3 mm 6.6 mm 8 mm 6.4 mm 6.5 mm 10.1 mm 16.2 mm 6.7 mm 2.8 mm 5.2 mm M3 Ø3.6 10 mm L 8.5 mm 19.1 mm • • • • terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock Color: white 8 mm 12.1 mm wire-to-wire solution • Easy to use double-row Pitch Spacing 14.0 mm 20 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) 98 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 EUROSTRIPS ® STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR TERMINAL STRIPS HE6H HE10H HE16H Pitch Spacing 12 mm 15 mm 15 mm Weight per piece (12 pole) 49.1 g 98.7 g 99.3 g Dimensions & Weight Technical Data/Ratings Approvals E211022 Wire Size (solid / stranded) 20-10 AWG 4-6 mm Voltage Rating 600 V Current Rating 40 A 7.0 lb-in Torque Insulation Material E211022 60998-2-1 2 Terminal Screw Material 2 E211022 60998-2-1 18-6 AWG 10-16 mm2 18-8 AWG 6-10 mm 500 V 600 V 500 V 600 V 500 V 16 A 50 A 25 A 63 A 35 A 0.55 Nm 7.6 lb-in 0.84 Nm 17.7 lb-in 1.4 Nm Polyamide 66/6 V0 Insert Material 60998-2-1 Polyamide 66/6 V0 Polyamide 66/6 V0 Tinned Brass Tinned Brass Tinned Brass Blue Chromated Steel Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length Mounting Hole Diameter Terminal Screw Size Terminal Strips Cat. No. 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole HE6HWPR/02 HE6HWPR/03 HE6HWPR/04 HE6HWPR/05 HE6HWPR/06 HE6HWPR/07 HE6HWPR/08 HE6HWPR/09 HE6HWPR/10 HE6HWPR/11 HE6HWPR/12 Accessories 6 mm 6 mm 4.5 mm 4.5 mm M3.5 M4 M5 Length Std. Pk. 19.8 mm 31.8 mm 43.8 mm 55.8 mm 67.8 mm 79.8 mm 91.8 mm 103.8 mm 115.8 mm 127.8 mm 139.8 mm 100 100 100 100 50 50 50 50 25 25 25 2 pole 3 pole 4 pole 12 pole Blank No. 1-12 No. 13-24 HCL12-2 HCL12-3 HCL12-4 HCL12-12 BS60E BS60EM1-12 BS60EM13-24 Cat. No. HE10HWPR/02 HE10HWPR/03 HE10HWPR/04 HE10HWPR/05 HE10HWPR/06 HE10HWPR/07 HE10HWPR/08 HE10HWPR/09 HE10HWPR/10 HE10HWPR/11 HE10HWPR/12 Std. Pk. Cat. No. External Jumpers Marking Plates 5 mm 4.2 mm 100 100 100 25 25 25 25 Length Std. Pk. 24.2 mm 39.2 mm 54.2 mm 69.2 mm 84.2 mm 99.2 mm 114.2 mm 129.2 mm 144.2 mm 159.2 mm 174.2 mm 40 40 40 40 20 20 20 10 10 10 10 Cat. No. Cat. No. HE16HWPR/02 HE16HWPR/03 HE16HWPR/04 HE16HWPR/05 HE16HWPR/06 HE16HWPR/07 HE16HWPR/08 HE16HWPR/09 HE16HWPR/10 HE16HWPR/11 HE16HWPR/12 Std. Pk. HCL15-2 HCL15-3 HCL15-4 HCL15-12 – – – Length Std. Pk. 24.2 mm 39.2 mm 54.2 mm 69.2 mm 84.2 mm 99.2 mm 114.2 mm 129.2 mm 144.2 mm 159.2 mm 174.2 mm 40 40 40 40 20 20 20 10 10 10 10 Cat. No. 100 100 100 25 – – – Std. Pk. HCL15-2 HCL15-3 HCL15-4 HCL15-12 – – – 100 100 100 25 – – – Isolation Partition HEP4/6H 5 – – – – Mounting Pins H6 50 – – – – HE10H DIMENSIONS 15 mm M4 15 mm 5.7 mm 12 mm Ø4.1 L Ø4.5 10.7 mm M4 9.3 mm 11.3 mm 5.7 mm Ø4.5 Ø8.2 11.3 mm M5 10.7 mm Ø8.2 M3.5 21.8 mm 9 mm Ø6.3 mm 27.8 mm 9.5 mm 17.5 mm 9.3 mm Ø4.2 4.3 mm 13.9 mm 7.7 mm M5 15 mm 15.0 mm 22.6 mm 15 mm Ø5 mm L 25.1 mm 25.1 mm Ø5.6 mm L 27.8 mm M3.5 HE16H DIMENSIONS 17.5 mm HE6H DIMENSIONS 12 mm 16 mm 25.1 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 99 EUROSTRIPS ® PLUGGABLE PANEL MOUNT FLAT BASE - 300V TERMINAL STRIPS HE42ST HE42BU HIGHLIGHTS FEATURES • Plug & Socket • Cost effective reliable Dimensions & Weight wire-to-wire solution • Easy to use double-row • • • • • • • terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock 300V / 600V up to 63A Color: white Pitch Spacing 10 mm 10 mm Weight per piece (12 pole) 30.6 g 30.4 g Technical Data/Ratings Approvals E211022 Wire Size (solid / stranded) to barrier strips 2 60998-2-1 24-10 AWG 2.5-4 mm2 24-10 AWG 2.5-4 mm Voltage Rating 300 V 400 V 300 V 400 V Current Rating 20 A 10 A 20 A 10 A 7.0 lb-in 0.4 Nm 7.0 lb-in 0.4 Nm Torque Insulation Material Polyamide 66/6 V0 Insert Material APPLICATIONS • HVAC • Appliances • Equipment • Power Distribution • Junction Boxes • Cost effective alternative E211022 60998-2-1 Terminal Screw Material Polyamide 66/6 V0 Tinned Brass Tinned Brass Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length Mounting Hole Diameter Terminal Screw Size Terminal Strips Cat. No. 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole HE42ST/02 HE42ST/03 HE42ST/04 HE42ST/05 HE42ST/06 HE42ST/07 HE42ST/08 HE42ST/09 HE42ST/10 HE42ST/11 HE42ST/12 Accessories 7 mm 6 mm 3.0 mm 3.6 mm M2.6 M3 Length Std. Pk. 16.4 mm 26.4 mm 36.4 mm 46.4 mm 56.4 mm 66.4 mm 76.4 mm 86.4 mm 96.4 mm 106.4 mm 116.4 mm 100 100 100 100 50 50 50 50 50 50 50 Std. Pk. Cat. No. 2 pole 3 pole 4 pole 12 pole External Jumpers Marking Plates Blank No. 1-12 No. 13-24 HCL10-2 HCL10-3 HCL10-4 HCL10-12 BS24E BS24EM1-12 BS24EM13-24 100 100 100 25 25 25 25 Cat. No. Length Std. Pk. HE42BU/02 HE42BU/03 HE42BU/04 HE42BU/05 HE42BU/06 HE42BU/07 HE42BU/08 HE42BU/09 HE42BU/10 HE42BU/11 HE42BU/12 16.4 mm 26.4 mm 36.4 mm 46.4 mm 56.4 mm 66.4 mm 76.4 mm 86.4 mm 96.4 mm 106.4 mm 116.4 mm 100 100 100 100 50 50 50 50 50 50 50 Cat. No. HCL10-2 HCL10-3 HCL10-4 HCL10-12 BS24E BS24EM1-12 BS24EM13-24 HE42ST DIMENSIONS 6.4 mm [0.252 in] 3.65 mm [0.144 in] Std. Pk. 100 100 100 25 25 25 25 HE42BU DIMENSIONS 10 mm [0.394 in] 10 mm [0.394 in] M3 M3 2.6 mm [0.102 in] Ø3 mm [0.118 in] 5.7 mm [0.224 in] 3.5 mm [0.140 in] 6.4 mm [0.252 in] 10 mm [0.394 in] 15 mm [0.59 in] 10 mm [0.394 in] L M3 Ø5.7 mm [0.224 in] M3 7.75 mm [0.305 in] Ø3.5 mm [Ø0.138 in] Ø3.6 [Ø0.142 in] Mounting Hole 23 mm [0.91 in] 3.2 mm [0.126 in] 14.9 mm [0.587 in] 7.9 mm [0.311 in] 10 mm [0.394 in] Ø3.6 [Ø0.142 in] 20 mm [0.787 in] L (All dimensions are shown in mm, to convert to inches please divide by 25.4) 100 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 EUROSTRIPS ® PLUGGABLE PANEL MOUNT STANDOFF FEET - 600V HE42SST TERMINAL STRIPS HE42SBU Dimensions & Weight Pitch Spacing 10 mm 10 mm Weight per piece (12 pole) 30.6 g 30.4 g Technical Data/Ratings Approvals E211022 Wire Size (solid / stranded) E211022 60998-2-1 24-10 AWG 2.5-4 mm2 60998-2-1 2 24-10 AWG 2.5-4 mm Voltage Rating 600 V 500 V 600 V 500 V Current Rating 20 A 10 A 20 A 10 A 7.0 lb-in 0.4 Nm 7.0 lb-in 0.4 Nm Torque Insulation Material Polyamide 66/6 V0 Insert Material Terminal Screw Material Polyamide 66/6 V0 Tinned Brass Tinned Brass Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length Mounting Hole Diameter Terminal Screw Size Terminal Strips Cat. No. 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole HE42SST/02 HE42SST/03 HE42SST/04 HE42SST/05 HE42SST/06 HE42SST/07 HE42SST/08 HE42SST/09 HE42SST/10 HE42SST/11 HE42SST/12 Accessories 7 mm 6 mm 3.0 mm 3.6 mm M3.5 M4 Length Std. Pk. 16.4 mm 26.4 mm 36.4 mm 46.4 mm 56.4 mm 66.4 mm 76.4 mm 86.4 mm 96.4 mm 106.4 mm 116.4 mm 100 100 100 100 50 50 50 50 50 50 50 Std. Pk. Cat. No. 2 pole 3 pole 4 pole 12 pole External Jumpers Marking Plates Blank No. 1-12 No. 13-24 HCL10-2 HCL10-3 HCL10-4 HCL10-12 BS24E BS24EM1-12 BS24EM13-24 Cat. No. HE42SBU/02 HE42SBU/03 HE42SBU/04 HE42SBU/05 HE42SBU/06 HE42SBU/07 HE42SBU/08 HE42SBU/09 HE42SBU/10 HE42SBU/11 HE42SBU/12 Std. Pk. 100 100 100 100 50 50 50 50 50 50 50 Cat. No. 100 100 100 25 25 25 25 Std. Pk. HCL10-2 HCL10-3 HCL10-4 HCL10-12 BS24E BS24EM1-12 BS24EM13-24 HE42SST DIMENSIONS 6.4 mm [0.252 in] 3.65 mm [0.144 in] Length 16.4 mm 26.4 mm 36.4 mm 46.4 mm 56.4 mm 66.4 mm 76.4 mm 86.4 mm 96.4 mm 106.4 mm 116.4 mm 100 100 100 25 25 25 25 HE42SBU DIMENSIONS 10 mm [0.394 in 10 mm [0.394 in] M3 M3 2.6 mm [0.102 in] Ø3 mm [0.118 in] 5.7 mm [0.224 in] Ø3.6 [Ø0.142 in] Mounting Hole 3.5 mm [0.140 in] 6.4 mm [0.252 in] 10 mm [0.394 in] 6.7 mm [0.264 in] 18.5 mm [0.728 in] 11.5 mm [0.453 in] 10 mm [0.394 in] Ø3.5 mm [Ø0.138 in] L M3 Ø5.7 mm [0.224 in M3 23 mm [0.91 in] 19.1 mm [0.752 in] 12.1 mm [0.477 in] 10 mm [0.394 in Ø3.6 [Ø0.142 in] L 14.0 mm [0.551 in] 20 mm [0.787 in] (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 101 EUROSTRIPS® TERMINAL STRIP 300V - CENTER BARRIER / WIRE PROTECTOR TERMINAL STRIPS ATS2.5 ATS1.5 ATS6 HIGHLIGHTS FEATURES • Center Barrier / • • • • • • • • • Dimensions & Weight Wire Protector 300V/600V up to 63A Cost effective reliable wire-to-wire solution Easy to use double-row terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock Color: translucent white APPLICATIONS • HVAC • Appliances • Equipment • Power Distribution • Junction Boxes • Cost effective alternative to barrier strips Pitch Spacing 8 mm 10 mm 12 mm Weight per piece (12 pole) 22 g 34 g 44 g Technical Data/Ratings Approvals E496554 Wire Size (solid / stranded) 22-12 AWG 22-16 AWG 0.2-1.5 mm Voltage Rating 300 V 300 V Current Rating 20 A 15 A Torque 4.4 lb-in Insulation Material E496554 2 60947-7-1 22-10 AWG 18-12 AWG 0.2-4 mm 400 V 300 V 300 V 15 A 30 A 30 A 0.5 Nm 5.3 lb-in Polyamide 6.6 Insert Material Terminal Screw Material E496554 2 60947-7-1 20-8 AWG 18-10 AWG 0.2-6 mm2 400 V 300 V 300 V 26 A 40 A 40 A 0.5 Nm 400 V 44 A 7 lb-in Polyamide 6.6 0.5 Nm Polyamide 6.6 Nickel Plated Copper Alloy Nickel Plated Copper Alloy Nickel Plated Copper Alloy Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel 5 mm (0.2 in.) 6 mm (0.24 in.) 7 mm (0.28 in.) 2.8 mm 3.5 mm 4.4 mm M2.5 M3 M3.5 Installation Instructions Wire Stripping Length Mounting Hole Diameter Terminal Screw Size Terminal Blocks Cat. No. Type 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole Center Barrier Wire Protector 60947-7-1 40.002 40.003 40.004 40.005 40.006 40.007 40.008 40.009 40.010 40.011 40.012 Accessories L (mm) Pk. ATS1.5/2 ATS1.5/3 ATS1.5/4 ATS1.5/5 ATS1.5/6 ATS1.5/7 ATS1.5/8 ATS1.5/9 ATS1.5/10 ATS1.5/11 ATS1.5/12 13.6 mm 21.5 mm 29.5 mm 37.4 mm 45.4 mm 53.3 mm 61.3 mm 69.2 mm 77.2 mm 85.1 mm 93.0 mm Cat. No. External Jumpers HCL8-2 HCL8-3 HCL8-4 HCL8-12 Marking Plates – – – Cat. No. Type 100 100 100 100 50 50 50 50 50 50 50 40.202 40.203 40.204 40.205 40.206 40.207 40.208 40.209 40.210 40.211 40.212 Std. Pk. Cat. No. 100 100 100 25 – – – ATS1.5 DIMENSIONS ATS1.5/2 ATS1.5/3 ATS1.5/4 ATS1.5/5 ATS1.5/6 ATS1.5/7 ATS1.5/8 ATS1.5/9 ATS1.5/10 ATS1.5/11 ATS1.5/12 L (mm) Pk. 17.0 mm 27.0 mm 37.0 mm 47.0 mm 57.0 mm 67.0 mm 77.0 mm 87.0 mm 97.0 mm 107.0 mm 117.0 mm 100 100 100 100 50 50 50 50 50 50 50 Cat. No. Type 40.402 40.403 40.404 40.405 40.406 40.407 40.408 40.409 40.410 40.411 40.412 Std. Pk. Pk. ATS1.5/2 20.0 mm ATS1.5/3 32.0 mm ATS1.5/4 44.0 mm ATS1.5/5 56.0 mm ATS1.5/6 68.0 mm ATS1.5/7 80.0 mm ATS1.5/8 92.0 mm ATS1.5/9 104.0 mm ATS1.5/10 116.0 mm ATS1.5/11 128.0 mm ATS1.5/12 140.0 mm Cat. No. 100 100 100 100 50 50 50 50 50 50 50 Std. Pk. HCL10-2 HCL10-3 HCL10-4 HCL10-12 100 100 100 25 HCL12-2 HCL12-3 HCL12-4 HCL12-12 100 100 100 25 BS24E BS24EM1-12 BS24EM13-24 25 25 25 BS60E BS60EM1-12 BS60EM13-24 25 25 25 ATS2.5 DIMENSIONS ATS6 DIMENSIONS 12.0 mm 10 mm 8 mm L (mm) M3.5 M3 M2.5 18.2 mm 10 mm Ø3.6 mm 21.8 mm 12 mm L Ø4.2 mm L (All dimensions are shown in mm, to convert to inches please divide by 25.4) 102 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 M3.5 9.5 mm 17.7 mm Ø6.8 mm 9.5 mm 4.3 mm M3 Ø4.4 mm 7.6 mm 15.5 mm 3.0 mm Ø5.7 mm 8.0 mm 2.5 mm 8 mm Ø3 mm L 7.5 mm 6.7 mm Ø5.4 mm M2.5 4.3 mm Ø3.5 mm Mounting Hole 6.4 mm 9.0 mm 3.5 mm Ø2.8 mm Mounting Hole 2.4 mm 13.7 mm 5.6 mm 23.0 mm EUROSTRIPS® TERMINAL STRIP 600V - CENTER BARRIER / WIRE PROTECTOR ATSF1.5 ATSF2.5 ATSF6 ATSF16 Dimensions & Weight Pitch Spacing 8 mm 10 mm 12 mm 15 mm Weight per piece (12 pole) 30 g 36 g 50 g 98 g Technical Data/Ratings Approvals E496554 Wire Size (solid / stranded) 60947-7-1 E496554 60947-7-1 22-12 AWG 22-16 AWG 0.2-1.5 mm2 22-10 AWG 18-12 AWG 0.2-4 mm2 Voltage Rating 600 V 600 V Current Rating 20 A 15 A Torque 4.4 lb-in Insulation Material Insert Material Terminal Screw Material 400 V 600 V 600 V 15 A 30 A 30 A 0.5 Nm 5.3 lb-in E496554 60947-7-1 E496554 20-8 AWG 18-10 AWG 0.2-6 mm2 400 V 600 V 600 V 26 A 40 A 40 A 0.6 Nm 7 lb-in 60947-7-1 14-6 AWG 18-6 AWG 0.2-16 mm2 400 V 600 V 600 V 44 A 63 A 65 A 0.8 Nm 800 V 82 A 20 lb-in 2.25 Nm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Nickel Plated Copper Alloy Nickel Plated Copper Alloy Nickel Plated Copper Alloy Nickel Plated Copper Alloy Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel 5 mm (0.2 in.) 6 mm (0.24 in.) 7 mm (0.28 in.) 8 mm (0.32 in.) 2.8 mm 3.5 mm 4.4 mm 4.2 mm M2.5 M3 M3.5 M5 Installation Instructions Wire Stripping Length Mounting Hole Diameter Terminal Screw Size Terminal Blocks Cat. No. 2 pole 3 pole 4 pole 5 pole 6 pole 7 pole 8 pole 9 pole 10 pole 11 pole 12 pole Type L (mm) Pk. 40.102 ATSF1.5/2 13.6 40.103 ATSF1.5/3 21.5 40.104 ATSF1.5/4 29.5 40.105 ATSF1.5/5 37.4 40106 ATSF1.5/6 45.4 40107 ATSF1.5/7 53.3 40.108 ATSF1.5/8 61.3 40.109 ATSF1.5/9 69.2 40.110 ATSF1.5/10 77.2 40111 ATSF1.5/11 85.1 40112 ATSF1.5/12 93.0 Accessories Cat. No. External Jumpers HCL8-2 HCL8-3 HCL8-4 HCL8-12 Isolation Partition Mounting Pins Marking Plates Cat. No. 100 100 100 100 50 50 50 50 50 50 50 Std. Pk. L (mm) Pk. Cat. No. 40.302 ATSF2.5/2 17.0 100 40.303 ATSF2.5/3 27.0 100 40.304 ATSF2.5/4 37.0 100 40.305 ATSF2.5/5 47.0 100 40.306 ATSF2.5/6 57.0 50 40.307 ATSF2.5/7 67.0 50 40.308 ATSF2.5/8 77.0 50 40.309 ATSF2.5/9 87.0 50 40.310 ATSF2.5/10 97.0 50 40.311 ATSF2.5/11 197.0 50 40.312 ATSF2.5/12 117.0 50 40.502 40.503 40.504 40.505 40.506 40.507 40.508 40.509 40.510 40.511 40.512 Cat. No. Cat. No. 100 100 100 25 HCL10-2 HCL10-3 HCL10-4 HCL10-12 – – – – – – – – – – ATSF1.5 DIMENSIONS Type Std. Pk. ATSF6/2 ATSF6/3 ATSF6/4 ATSF6/5 ATSF6/6 ATSF6/7 ATSF6/8 ATSF6/9 ATSF6/10 ATSF6/11 ATSF6/12 L (mm) Pk. 20.0 32.0 44.0 56.0 68.0 80.0 92.0 104.0 116.0 128.0 140.0 Cat. No. 100 100 100 100 50 50 50 50 25 25 25 Type L (mm) Pk. 40.702 ATSF16/2 25.0 40 40.703 ATSF16/3 40.0 40 40.704 ATSF16/4 55.0 40 40.705 ATSF16/5 70.5 40 40.706 ATSF16/6 86.0 20 40.707 ATSF16/7 101.0 20 40.708 ATSF16/8 116.0 20 40.709 ATSF16/9 131.0 10 40.710 ATSF16/10 146.0 10 40.711 ATSF16/11 161.0 10 40.712 ATSF16/12 176.0 10 Cat. No. Std. Pk. HCL12-2 HCL12-3 HCL12-4 HCL12-12 HEP4/6H 5 HEP4/6H 5 – H4 50 H6 50 – – BS24E BS24EM1-12 BS24EM13-24 25 25 25 BS60E BS60EM1-12 BS60EM13-24 25 25 25 BS1016E BS1016EM1-12 BS1016EM13-24 25 25 25 ATSF2.5 DIMENSIONS 100 100 100 25 Std. Pk. 100 100 100 25 HCL15-2 HCL15-3 HCL15-4 HCL15-12 ATSF6 DIMENSIONS 100 100 100 25 – ATSF16 DIMENSIONS 15.1 mm 12 mm 10 mm 8 mm Type M5 M3.5 M3 M2.5 5.4 mm Ø3 mm L 7.6 mm 12 mm 18.2 mm Ø3.6 mm 10 mm L 14 mm 22.3 mm 12 mm Ø4.2 mm L 15.8 mm 23.0 mm Ø6 mm 15.1 mm L M5 11 mm 25.8 mm Ø8 mm 16.5 mm 9.6 mm 10.4 mm M3.5 20.9 mm Ø6.8 mm 9.5 mm 8.5 mm Ø5.7 mm 19.4 mm M3 7.5 mm 12.5 mm 6.4 mm 10.1 mm 6.1 mm 8 mm Ø4.2 mm Ø4.4 mm 9.6 mm 12 mm M2.6 Ø5.35 mm 4.3 mm Ø3.5 mm Mounting Hole 3.5 mm Ø2.8 mm Mounting Hole 7.4 mm 2.4 mm 17 mm 5.6 mm 15.1 mm 26.3 mm (All dimensions are shown in mm, to convert to inches please divide 25.4) (Allbydimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 103 EUROSTRIPS ® ACCESSORIES TERMINAL STRIPS HIGHLIGHTS EXTERNAL JUMPERS EXTERNAL  JUMPERS • Bus potential between poles External Jumper Pole Spacing HCL12 HCL15 HE6, HE6H HE10, HE16, HE10H, HE16H 8 mm (0.315 in.) 10 mm (0.394 in.) 12 mm (0.472 in.) 15 mm (0.591 in.) Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. HCL8-2 HCL8-3 HCL8-4 HCL8-12 20 mm 35 mm 50 mm 170 mm 100 100 100 25 HCL10-2 HCL10-3 HCL10-4 HCL10-12 15 mm 25 mm 35 mm 115 mm 100 100 100 25 HCL15-2 HCL15-3 HCL15-4 HCL15-12 5 mm 5 mm 6 mm 6 mm 6 mm 9 mm L L L L ISOLATION PARTITIONS For Eurostrip HE4HN, HE6H, TSF2.5, TSF6 HEP4/16H Dimensions Std. Pk. 27 x 18.5 x 3.4 mm 5 (All dimensions are shown in mm, to convert to inches please divide by 25.4) 104 8 mm 6.5 mm 4 mm Cat. No. 100 100 100 25 HCL15 3 mm 3 mm 3 mm 3 mm 6 mm 18 mm 30 mm 42 mm 138 mm HCL12 6.5 mm 3 mm 4 mm HCL12-2 HCL12-3 HCL12-4 HCL12-12 HCL10 HCL8 2 mm 100 100 100 25 3 mm 12 mm 20 mm 28 mm 92 mm 17 mm 2 pole 3 pole 4 pole 12 pole 16 mm • • • • • HCL10 HE4, HE4HN 3 mm Ordering Information ISOLATION  PARTITION • Separation between adjectant poles of different potentials Visual separation of poles Better circuit Identification Increasing wiring efficiency Material: Polyamide 66 Color: black HCL8 HE1, HE1H Eurostrip 16 mm • Copper Alloy nickel plated (pins) Polyamide 66 (Insulation) Color: Black Technical Information 16 mm on terminal Strips • Eliminates Wire Jumpers • Less wiring Time • Material: Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 EUROSTRIPS ® ACCESSORIES HIGHLIGHTS MOUNTING PINS MOUNTING  PINS • Faster Panel Mounting with snap-on mounting pins Technical Information • Installation Mounting Pins H4 H6 Eurostrip Type HE4HN HE6H 0.5-1.5 mm 0.8-1.8 mm Ø4.2 mm Ø5.2mm Panel Thickness Drill Hole Size Ordering Information Cat. No. Std. Pk. Cat. No. H4 50 Std. Pk. H6 • 50 • 1) Insert Pin through drilled hole 2) Position Eurostrip on mounting pin 3) Snap Eurostrip onto Mounting Pins Use 2 or more pins per Eurostrip Material: Polycarbonate MARKING  PLATES • Install Mounting Plate 21 mm 24 mm 12.6 mm • 14.7 mm Ø 4.2 mm Ø 5.2 mm 8.5 mm • • 11 mm • MARKING PLATES • • under or on top of Eurostrip Easy identification of individual pole positions for more wiring efficiency Less installation time Blank marking plates for hand-marking Imprinted Marking Plates (No. 1-12, 13-24) Material: PVC Color: white with black imprint Imprinting • Mark individual pole positions • Marking saves installation Dimensions & Weight Eurostrip Type HE4, HE4HN Ordering Information Blank 1-12 13-24 Cat. No. BS24E BS24EM1-12 BS24EM13-24 HE6, HE6H Std. Pk. 25 25 25 Cat. No. HE10, HE10H, HE16, HE16H Std. Pk. BS60E BS60EM1-12 BS60EM13-24 25 25 25 Cat. No. Std. Pk. BS1016E BS1016EM1-12 BS1016EM13-24 25 25 25 • • • • • Time Marking on turret location Consecutive, identical or custom imprints Specify imprinting in part# Imprint: black ink, rub-resistant 500pcs MOQ IMPRINTING Imprint Example Order Examples Ordering Information Consecutive 1-6 Consecutive 8-1 Identical HE10HWPR/06/1-6 Cat. No. HE10HWPR/06/1-6 HE1WPR/08/8-1 HE6WPR/12/1 Std. Pk. 500 500 500 For custom imprints please contact Altech. (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 105 ACCESSORIES DIN RAIL DIN RAIL & MOUNTING DIN35 x 7.5 DIN35 x 15 HIGHLIGHTS FEATURES • Altech DIN Rails comply with DIN EN60715, EN50022, EN50035, EN50045 standards • Easy mounting of terminal blocks, power supplies and other control components and devices into panel • Space saving • Reduces labor • 35mm, 32mm and 15mm versions • 1m and 2m standard length • Custom length available • Perforated, unperforated MATERIAL • Zinc-plated steel • 35x7.5mm • 35x15mm • 32mm • 15mm • Aluminum • 35x7.5mm • Stainless Steel (Type AISI 304) • 35x7.5mm 35 mm x 7.5 mm deep Zinc Plated Steel Type Cat. No. Perforated 2511120 2511120/1M Unperforated 2511110 2511110/1M Length 2m 1m 2m 1m Std. Pk. 20 20 20 20 Stainless Steel Type Cat. No. Perforated 2511125 2511125/1M Unperforated 2511115 2511115/1M Length 2m 1m 2m 1m Std. Pk. 20 20 20 20 Length 2m 1m 2m 1m Std. Pk. 20 20 20 20 Aluminum Type Perforated Unperforated Cat. No. 2511121 2511121/1M 2511111 2511111/1M 35 mm x 15 mm deep Zinc Plated Steel Type Cat. No. Length Perforated CA701-15/S-2M 2m CA701-15/S 1m Unperforated CA701-15-2M 2m CA701-15 1m Dimensions Preforated Steel and Stainless Preforated Steel 18 18 Preforated Aluminum 25.4 Unpreforated Steel 12.7 4.6 Unpreforated 106 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 10 10 10 10 ACCESSORIES DIN RAIL DIN RAIL & MOUNTING DIN32 DIN15 32 mm x 15 mm deep Zinc Plated Steel Type Cat. No. Perforated 2511160 2511160/1M Unperforated 2511150 2511150/1M Length 2m 1m 2m 1m Std. Pk. 10 20 10 20 15 mm x 5.5 mm deep Zinc Plated Steel Type Cat. No. Perforated CA601/S Length 1m Std. Pk. 50 Dimensions Preforated Steel Preforated Steel 18 Unpreforated Steel Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 107 ACCESSORIES MOUNTING ACCESSORIES DIN RAIL & MOUNTING SUPPORT BRACKETS HIGHLIGHTS CA603 SUPPORT  BRACKETS • Elevate DIN Rail away from panel • Easier mounting of components • Suitable for all mounting rails • Increase wiring access • 45° version for improved visibility • Straight brackets available in 3 heights: • 1” • 2” • 3” MOUNTING • Brackets mount with 2 screws to any panel or flat surface • Tapped center hole for DIN Rail mounting TSTW M6 Ø7mm (.28in) M6 18mm (.71in) 48mm (1.89in) H Ø6mm (.24 in.) Slot 6x15mm (.24x.59 in.) 52m 60mm (2.36in) 18mm(.71in.) m( 2.0 74m 74mm (2.91in) m( 5 in .) 2.9 8 in .) Cat. No. CA603 Std. Pk. 25 Cat. No. CA703 CA803 CA903 Height 1 in. 2 in. 3 in. Std. Pk. 25 25 25 UNIVERSAL DIN CLIPS D35CLIP MATERIAL • Zinc-plated yellow chromated Steel CMTB35 CA902 Ø 4.3 x 4 25.4 18 14.5 Ø 5.5 x 2 58 UNIVERSAL  DIN CLIPS • Clips on to any 35mm/32mm DIN Rail • Flexible mounting solution • Mount any component on 32mm/35mm DIN Rail • Various mounting hole solutions • Material: zinc-plated steel, Polyamide 66 Cat. No. Mounting Hole Std. Pk. D35CLIP-M4 M4 100 D35CLIP-M5 M5 100 Cat. No. CMTB35 Mounting Hole Std. Pk. Cat. No. 2x4.4 mm 50 CA902 2x5.5 mm SPACER CASP CDL4U SPACER SPACER • Increases creepage and clearance distance between terminal blocks • Segregate different groups of terminal blocks WARNING  LABELS • Mounted on top of terminal • block for visual identification Make entire terminal block assembly shock-proof Cat. No. CASP Cat. No. CDL4USP Dimensions Std. Pk. 54 x 55.5 x 6 mm 50 WARNING LABELS Cat. No. WLX2.5 WLX4 WLX6 WLX10 SWL4 SWL10 108 Dimensions Std. Pk. 29 x 43 x 8 mm 50 Terminal Blocks CX2.5 Series, CXDL2.5, CXK2.5, CXM2.5 CX4 Series, CXF Series, CXK4 CX6 Series, CXDB Series CX10 Series CTS4U-N, CDB4, CMDB4 CTS6U, CDB6U, CMDB6 Pack 1 1 1 1 1 1 Std. Pk. Strips 20 20 20 20 20 20 Tags 100 100 100 100 100 100 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 100 ACCESSORIES END STOPS END STOPS Selection Table HIGHLIGHTS DIN Rail Type ¸ ¸ ¸ CA102 35x7.5mm DIN Rail 35x15mm DIN Rail 32mm DIN Rail ¸ ¸ CA202 ¸ ¸ ¸ CA702 ¸ ¸ CA802 ¸ ¸ CA103 CA602 ¸ CA302 CA402 CA502 ¸ ¸ 15mm DIN Rail ¸ POLYAMIDE 66 CA702 CA802 CA202 MOUNTING  PINS • End Stops prevent Ter- minal Blocks and other DIN Rail components from moving on the rail • Versions for • 35x7.5mm Rail • 35x15mm Rail • 32mm Rail • 15mm Rail • Heavy Duty End stop CA102, CA202 • Screwless End Stop CA103 (snap on) • Material: • Polyamide • Steel Heavy Duty End Stop Cat. No. CA702 Dimensions 34 x 44 x 9mm Std. Pk. Cat. No. 50 CA802 CA102 Dimensions 32 x 45 x 8mm Std. Pk. Cat. No. Dimensions Std. Pk. 50 CA202 44.5 x 50 x 9.5mm 50 CA103 CA602 Screwless Snap-On Cat. No. CA102 Dimensions 46 x 50 x 9mm Std. Pk. 50 Cat. No. CA103 Dimensions 41 x 35 x 6mm Std. Pk. Cat. No. 50 CA602 Dimensions 20 x 28 x 8mm Std. Pk. 50 STEEL CA302 Cat. No. CA302 Dimensions Std. Pk. 27 x 39.5 x 16mm 50 CA402 CA502 Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA402 27 x 39.5 x 16mm 50 CA502 25 x 22.5 x 11.5mm 50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 109 ACCESSORIES GROUP MARKERS MARKING HIGHLIGHTS DIN RAIL MOUNT GMH6 FEATURES • Group identification • Holders fit standard MT8 GMH7 marking tags • GMH6, GMH7 mounted directly on DIN Rail • GMH1, GMH2, GMH3, • • GMH4, GMH5, GMH8 mounted on End Stops MT1G, MT2G, can be used with all these holders or can be directly mounted on all end stops Material: Polyamide 66 Cat. No. GMH6 Dimensions 46.5 x 44.5 x 9.5mm Std. Pk. 50 Cat. No. GMH7 Dimensions Std. Pk. 46.5 x 44.5 x 19.5mm 50 MOUNT ON END STOP Suitable for CA602 Cat. No. GMH1 Suitable for CA802 Dimensions 15.8 x 14.6 x 8mm Std. Pk. 100 GMH2 / GMH3 Suitable for CA702 Std. Pk. 100 Dimensions 16.2 x 14 x 8mm Cat. No. GMH4 Suitable for CA103 Dimensions 23.2 x 14 x 8mm 23 x 14 x 8mm Cat. No. GMH5 Std. Pk. 100 100 Dimensions 13.7 x 14 x 8mm Mountable on all End Clamps Std. Pk. Dimensions Cat. No. 100 GMH8 44.65 x 31.10 x 10mm 100 GMH8N 44.65 x 31.10 x 6mm Cat. No. MTG1 MTG2 Dimensions 4.3 x 34 x 17.8mm 4.3 x 34 x 8mm TM5 Suitable for CXDL Series Cat. No. TM5 110 Std. Pk. 100 MTG1 / MTG2 GMH8 / GMH8N Suitable for CA702 (GMH2) CA802 (GMH3) Cat. No. GMH2 GMH3 GMH5 GMH4 GMH1 Dimensions 38 x 17 x 5mm Std. Pk. 50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Std. Pk. 50 50 ACCESSORIES MARKING TAGS MARKING • Cost Effective MT marking system for quick and accurate identification • Push-On Tags fit all Altech DIN Rail mount terminal blocks • Inserted individually or as strips of 10 • Quick and easy marking BLANK MARKING TAGS Cat No./ Standard Packs Type Pack Strips Tags MT2 1 10 100 MT3 1 20 100 MT4 1 10 100 MT5 1 10 100 MT6 1 10 100 MT8 1 10 100 MT9 1 10 100 MT10 1 20 100 MT12 1 20 100 MT16 1 20 100 MT2G 1 10 100 MT2B4 1 10 100 Continuous Tags MT6F 1 10 10 MT9F 1 10 10 • Blank Marking Tags for customer marking • Order with horizontal/ vertical imprint • Standard imprints with consecutive or identical numbers/ characters • Custom imprint with short lead time • Supplied in packs of 100 tags/ 10 strips Dimensions H W 4.9mm 5.8mm 5.0mm 10.0mm 5.0mm 4.8mm 9.5mm 4.5mm 9.5mm 5.6mm 10.5mm 7.5mm 10.3mm 8.7mm 10.4mm 9.5mm 10.4mm 11.4mm 10.5mm 15.4mm 5.0mm 5.0mm 5.8mm 9.1mm 9.5mm 10.3mm W H Blank Marking Tag Horizontal Imprint 60.0mm 90.0mm Vertical Imprint HOW TO ORDER IMPRINTED MARKING TAGS IMPRINT EXAMPLES FOR MT6 HORIZONTAL Imprint 1 2 3 4 5 6 7 8 9 10 1-10 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 91-100 101-110 111-120 121-130 Cat. No. MT6/H-1 MT6/H-2 MT6/H-3 MT6/H-4 MT6/H-5 MT6/H-6 MT6/H-7 MT6/H-8 MT6/H-9 MT6/H-10 MT6/H-1-10 MT6/H-11-20 MT6/H-21-30 MT6/H-31-40 MT6/H-41-50 MT6/H-51-60 MT6/H-61-70 MT6/H-71-80 MT6/H-81-90 MT6/H-91-100 MT6/H-101-110 MT6/H-111-120 MT6/H-121-130 Imprint 131-140 141-150 151-160 161-170 171-180 181-190 191-200 1-100 1-50 A B C L1 L2 L3 N R S X Y Z Ground Symbol VERTICAL Cat. No. MT6/H-131-140 MT6/H-141-150 MT6/H-151-160 MT6/H-161-170 MT6/H-171-180 MT6/H-181-190 MT6/H-191-200 MT6/H-1-100 MT6/H-1-50 MT6/H-A MT6/H-B MT6/H-C MT6/H-L1 MT6/H-L2 MT6/H-L3 MT6/H-N MT6/H-R MT6/H-S MT6/H-X MT6/H-Y MT6/H-Y MT6/H-GRND Imprint 1 2 3 4 5 6 7 8 9 10 1-10 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 91-100 101-110 111-120 121-130 Cat. No. MT6/V-1 MT6/V-2 MT6/V-3 MT6/V-4 MT6/V-5 MT6/V-6 MT6/V-7 MT6/V-8 MT6/V-9 MT6/V-10 MT6/V-1-10 MT6/V-11-20 MT6/V-21-30 MT6/V-31-40 MT6/V-41-50 MT6/V-51-60 MT6/V-61-70 MT6/V-71-80 MT6/V-81-90 MT6/V-91-100 MT6/V-101-110 MT6/V-111-120 MT6/V-121-130 Imprint 131-140 141-150 151-160 161-170 171-180 181-190 191-200 1-100 1-50 A B C L1 L2 L3 N R S X Y Z Ground Symbol Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Cat. No. MT6/V-131-140 MT6/V-141-150 MT6/V-151-160 MT6/V-161-170 MT6/V-171-180 MT6/V-181-190 MT6/V-191-200 MT6/V-1-100 MT6/V-1-50 MT6/V-A MT6/V-B MT6/V-C MT6/V-L1 MT6/V-L2 MT6/V-L3 MT6/V-N MT6/V-R MT6/V-S MT6/V-X MT6/V-Y MT6/V-Y MT6/V-GRND 111 ACCESSORIES PLOTTERS & ENGRAVERS 112 MARKING SYSTEMS Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 ACCESSORIES MARKING SYSTEMS PLOTTERS PLOTTERS The Altech VP Series base unit is an auxiliary plotter that has to be connected to a PC via a USB connection. It is a high speed plotting device and enables plotting of different markers in one setting. The base unit is controlled through a PC with the help of Vario Sign software (sold separately). Manual available in English and Spanish. The special design of the VP Series enables it to hold different markers from various manufacturers at the same time. It is also possible to write on relatively large markers with a maximum height of 10.5 mm. PLOTTER VP 600 BASIC PLOTTER VP 600 A3 Ordering Information Ordering Information Cat No. 34000082 Cat No. 34000080 • Professionally marking of connectors, wires, cables, equipment, cable ties, shrink tubing, labels and signs of different sizes and materials, as well as customerspecific items. • Manual insertion of plotter pen • Auto calibration • Universal Power Supply 100-240V AC • Control language HPGL • Universal marking software (VarioSign) sold separately • Marking area 273 x 305 mm • Size: 18.5 x 18.9 x 6.1 in. (470 x 480 x 155 mm) • Weight: 13.9 lbs. • Basic features of plotter VP 600 Basic plus: • Integrated and automated pen station. Holds 4 different pens at the same time, for fast and frequently changing applications. • Built-in pen priming function • Automatic recognition system for marking fixture / plates ensures faster and easier handing of frequently changing marking applications. • Wide marking area 422 x 305 mm • Size: 27.2 x 18.9 x 6.1 in. (690 x 480 x 155 mm) • Weight: 18.3 lbs. ACCESSORIES PLOTTER PENS ALTECH FIXTURES SOFTWARE VARIOSIGN Cat. No. 35003018 35003025 35003035 Description Etching Plotter Pen (red) Etching Plotter Pen (white) Etching Plotter Pen (yellow) Tip Size 0.18 mm 0.25 mm 0.35 mm 35003118 35003125 35003135 Non-Etching Plotter Pen (red) Non-Etching Plotter Pen (white) Non-Etching Plotter Pen (yellow) 0.18 mm 0.25 mm 0.35 mm Cat. No. 34902191 34902081 34902001 34902057 34902080 Description MT2G MT2, MT3, MT4, MT2B4 MT5, MT6, MT8, MT10, MT12, MT16 MT9 MTG1, MTG2 Cat. No. 34000022 Description Variosign Software * Fixtures for other Terminal Block Manufactures are available, please contact Altech for additional information. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 113 FERRULES INTRODUCTION Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Using ferrules offers several advantages: ELIMINATE CROSS SHORTING caused by unraveled stray wire strands. IMPROVE TERMINAL CONNECTIONS and reduce resistance by providing a solid surface at the point of connection. REDUCE INSTALLATION TIME by eliminating the need to dress loose wire strands and facilitating wire insertion into the terminal clamp. PREVENT CONDUCTOR BREAKAGE due to bending, wire stress or vibration. 114 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 Recommended Installation Procedure FERRULES Cutting and stripping the wire The wire should be cut as squarely and evenly as possible, taking care to avoid angular cuts or damage to the conductor. The strip length of the insulation will depend on the barrel length of the ferrule and the outside diameter of the wire. Ideally the wire insulation should be stripped to a length that allows the conductor end to reach flush to the tip of the ferrule, when inserted. The end of the conductor should not extend more than .5mm past the tip of the ferrule.