CA751/10

Screw Clamp Terminal Block Accessories Jumpering System The jumpering systems bus potentials between terminal blocks, reducing wiring time. Adjacent blocks or selective terminal blocks within an assembly can be easily interconnected, leaving terminal clamps free for wiring. Purchase complete assemblies, which are ready for installation, or select individual components to create custom or extra long jumpers. Jumper ampacity is lower than the rated current of the respective terminal blocks, therefore, applied current must not exceed the maximum current value of the block. Internal jumpers may be used in combination with external jumpers to achieve additional jumpering possibilities. Internal Jumper Assemblies Internal Jumper Assemblies consist of a Current Bar, Shorting Sleeves and screws. They install easily into the center of the terminal block and connect to the current bar. They are available as standard 2, 3, 4 or 10 pole assemblies and are ready for immediate installation. Insulated internal jumpers provide shock protection when installed on terminal block assemblies. External Jumper External Jumpers bus potentials between terminal blocks, reducing wiring time. Adjacent or selected blocks within an assembly can be easily interconnected. Jumper poles may be removed for selective jumpering. Jumpers are insulated and available in 2, 3, 4 and 10 pole versions. They are made of tin plated brass/copper. Current Bars Current Bars are offered to create custom jumper assemblies for increased number of poles or custom jumpers. Select the current bar with the required number of poles, or field cut them to the required length. They are made of tin or nickel plated copper or brass. Shorting Sleeves & Screws Shorting Sleeves & Screws ensure reliable and mechanically safe electrical connections between current bars and the terminal block current bars. One shorting sleeve is required for each jumpered terminal. They are made of nickel plated brass. 1 Internal Jumpering System not available. 2 100 pole strip can be broken down to any number of poles desired. 96 INTERNAL JUMPER INSULATED INTERNAL JUMPER Terminal Series Poles Cat. No. Torque Std. Pk. Cat. No. Torque Std. Pk. CTS2.5UN 2 3 4 10 1002 CA721/2 CA721/3 CA721/4 CA721/10 CA721/100 0.4 Nm 100 100 100 10 10 CA741/2 CA741/3 CA741/4 CA741/10 CA741/100 0.4 Nm 100 100 100 10 10 CTS4UN CMC1-2 CMC2-2 CTS4UTM CKT4U CDL4UN 2 3 4 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 0.4 Nm 100 100 100 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 0.4 Nm 100 100 100 10 10 1002 10 (breakable) 2 3 4 100 CA723/2 CA723/3 CA723/4 CA723/10 0.5 Nm 100 50 50 10 CA743/2 CA743/3 CA743/4 CA743/10 0.5 Nm 100 50 50 10 CTS10U 2 3 4 10 CA724/2 CA724/3 CA724/4 CA724/10 0.5 Nm 100 50 50 10 CA744/2 CA744/3 CA744/4 CA744/10 0.5 Nm 100 50 50 10 CTS16U 2 3 4 10 CA751/2 CA751/3 CA751/4 CA751/10 0.8 Nm 50 50 50 10 CA761/2 CA761/3 CA761/4 CA761/10 0.8 Nm 50 50 50 10 CTS25U 2 3 4 10 CA725/2 CA725/3 CA725/4 CA725/10 0.8 Nm 50 20 20 10 CA745/2 CA745/3 CA745/4 CA745/10 0.8 Nm 50 20 20 10 CTS35U 2 3 4 10 CA726/2 CA726/3 CA726/4 CA726/10 0.8 Nm 50 20 20 10 CA746/2 CA746/3 CA746/4 CA746/10 0.8 Nm 50 20 20 10 CTS35UN* 2 3 4 10 CA771/2 CA771/3 CA771/4 CA771/10 0.8 NM 50 20 20 10 CA781/2 CA781/3 CA781/4 CA781/10 0.8 NM 50 20 20 10 CMT4 CMT4S CMB4 CDL4U CDL4U(I.S) ODL4U CDL4UTM 2 3 4 10 1002 10 (breakable) CA727/2 CA727/3 CA727/4 CA727/10 0.4 Nm 100 100 100 10 CA747/2 CA747/3 CA747/4 CA747/10 0.4 Nm 100 100 100 10 DDFL4U DDFL4U(E) DDDL4U CSFL4U1 CSFL4U(L)1 CSDL4U 2 3 4 10 CA729/2 CA729/3 CA729/4 CA729/10 0.5 Nm 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 0.5 Nm 100 50 50 10 CAFL4U CAFL4U(L)1 2 3 4 10 CTL2.5U CTL2.5UH CTL2.5UL CTL2.5UHL CTL2.5U(I.S) 2 3 4 10 1002 10 (breakable) CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 0.4 Nm 100 50 50 20 20 CTS6U CDTTU1 CDTTU-SH1 CSDL6U1 CSFL6U1 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com