CB1038-2/L

Fuse Holders, 10 x 38 mm and CC Type 1 POLE 2 POLE 3 POLE 17.5 mm 35 mm 52.5 mm Height x Length 81 x 64.5 mm 81 x 64.5 mm 81 x 64.5 mm Stripping Length 11 mm 11 mm 11 mm Insulation Material Aculon ® Aculon ® Aculon ® Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps 1.5-25sq.mm / 24-4 AWG 1.5-25sq.mm / 24-4 AWG 1.5-25sq.mm / 24-4 AWG 690 V / 32A 690 V / 32A 690 V / 32A The main characteristics of fuse disconnectors are: • UL recognized (10x38mm) • UL listed (CC Type) • Compliance with IEC 60947-1, IEC 60947-3 • Plastic parts are made of material resistant to high temperatures • All contact surfaces are silver plated • Mounting on standard DIN 35 mm rail (DIN EN60715). • Available up to 4 pole • For all sizes a version with electronic indicator is available. There are two technical types of indicator: L (LED) (10x38mm only) with built in LED diode which blinks after the fuse-link operates. The internal circuit resistance is 2M, thus the total dissipation is minimal. The indicator is capable of operating in conditions of open circuit with minimum capacitance be-tween connection cables. Operating voltage range spans from 50V to 690V AC and DC. Terminal Width (B) Wire Range Rating Rating Torque Cylindrical 10x38 Indicator: None LED Neon 600 V AC/DC / 30A 600 V AC/DC / 30A 2-2.5 Nm / 31 lb-in Cat. No. 2-2.5 Nm / 31 lb-in Std. Pk. CB1038-1 CB1038-1/L CB1038-1/I Cat. No. CB1038-2 CB1038-2/L CB1038-2/I 1 1 1 Ø10 x 38 mm Type of Fuse Used Std. Pk. 1 1 1 600 V AC/DC / 30A 2-2.5 Nm / 31 lb-in Cat. No. Std. Pk. CB1038-3 CB1038-3/L CB1038-3/I Ø10 x 38 mm 1 1 1 Ø10 x 38 mm Approvals** E212627 CC Type Holder I (NEON) (10x38mm only) with neon lamp, which is constantly lit after the fuselink operates. The internal Type of Fuse Used circuit resistance is 570k, thus it is necessary that the Approvals circuit be closed in order for the indicator to function. The operational voltage range is DIN Rail for ordering information 100 V to 750 V AC. Cat. No. E212627 Std. Pk. CB10CC-1 1 Cat. No. Std. Pk. CB10CC-2 CC Type 1 E212627 Cat. No. CB10CC-3 CC Type E212627 Std. Pk. 1 CC Type E212627 E212627 refer to pages 90-91 * Fuses are sold separately Altech, see pages 100-101. **1000V UL PV rating pending. End Stop for ordering information refer to page 92 CA702 CA802 50 50 CA702 CA802 50 50 50 50 79 mm (3.11 in.) 64.5 mm (2.54 in.) Cylindrical 10 x 38 47.5 mm (1.87 in.) 37 mm (1.46 in.) 4 mm (0.16 in.) B 81 mm (3.19 in.) CC Type 24 CA702 CA802 Dimension for B: 1 Pole 1 Pole + Neutral 2 Pole 3 Pole 3 Pole + Neutral 17.5mm 35mm 35mm 52.5mm 70mm Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com