CDB4/1

Distribution Block Altech CDB Compact Distribution Blocks are an ideal choice for a simplified distribution system. A lug/bolt secures the incoming cable and the screw clamp design of the block provides the outgoing connections. These provide easy connect points and ensure perfect continuity for distribution. A protective shield effectively shrouds the incoming connection. Application Information: Sum of outgoing currents on either side of center should not exceed half the maximum permissible incoming current. Sum of total outgoing currents should not exceed maximum permissible incoming current. Connection for higher outgoing currents should be done through the terminal nearest to the incoming connection. CDB4/x(1)** CDB4/x* Terminal Width 6 mm 6 mm Height & Width 45 x 43 mm 45 x 43 mm Stripping Length 8 mm 8 mm Insulation Material Polyamide 6.6 Polyamide 6.6 1 Lug/ M5 bolt connection for ring lug Screw clamp connection 1 Lug M5 /bolt connection for ring lug Screw clamp connection Type of Connection Input Output Approvals 60947-7-1 E220514 10-8 AWG 22-12 AWG 6-16 sq.mm 0.2-4 sq.mm 10-8 AWG 22-10 AWG Voltage Rating 600 V 800 V Input Current Rating Max. Individual Output 50 A 25 A 26 lb-in 7 lb-in Wire Range Torque Input Output Input Output 60947-7-1 E220514 10-8 AWG 22-12 AWG 6-16 sq.mm 0.5-4 sq.mm 10-8 AWG 22-10 AWG 600 V 600 V 800 V 600 V 64 A 32 A 50 A 35 A 50 A 25 A 64 A 64 A 50 A 35 A 2.0 Nm 0.5 Nm 26 lb-in 7 lb-in 26 lb-in 7 lb-in 2.0 Nm 0.5 Nm 26 lb-in 7 lb-in Other Approvals Terminal Block Cat. No. H x W x L (mm) Outputs Std.Pk. Cat. No. CDB4/1 CDB4/2 CDB4/3 CDB4/4 CDB4/5 CDB4/6 45 x 43 x 44 45 x 43 x 56 45 x 43 x 68 45 x 43 x 80 45 x 43 x 96 45 x 43 x 108 CDB4/2(1) 45 x 43 x 52 CDB4/3(1) 45 x 43 x 58 CDB4/4(1) 45 x 43 x 64 CDB4/5(1) 45 x 43 x 70 CDB4/6(1) 45 x 43 x 76 CDB4/10(1)45 x 43 x 100 CDB4/11(1) 45 x 43 x 106 4 8 12 16 20 24 10 10 10 10 10 10 Cat. No. H x W x L (mm) Outputs Std.Pk Cat. No. Std. Pk. End Stop for ordering information refer to page 92 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tags MT6 100 MT6 100 6 8 10 12 14 22 24 10 10 10 10 10 10 10 Std. Pk. DIN Rail for ordering information refer to pages 90-91 COLOR BLOCKS (other than standard grey) When ordering please add color suffix to Cat. No. Warning Label Example for color Red: Cat.No./R Color Red Yellow Blue Green Ordering Suffix R Y BU G Consult Altech for availability: Orange O Beige BG Dark Brown DB Black BL White W 34 * NOTE: x signifies how many blocks are on each side of input. ** NOTE: x signifies number of blocks on left side of input. 1 block is on right side. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com