CSP1

Terminal Block Accessories PARTITIONS Isolation Partitions Isolation partitions provide separation between terminal blocks with different potentials. When used for DC power applications, voltages of up to ± 600V DC can be used on either side of the isolation partition. They also provide visual separation between groups of blocks. • Material: polyamide 6.6 • Standard color: gray Cat. No. Std. Pk. Dimensions (H x L x W) Suitable for: PP2.5/4UN PP6/10U PP25U PP25UN PP35U PP35UN PPCMT4 PPCSFL4U PPCSC2.5T PPCSC4T PPCSC6T 50 50 50 50 50 50 50 50 50 50 50 37 x 44 x 1.6 37.5 x 56.5 x 1.5 46.5 x 62 x 1.5 42.5 x 62 x 1 50 x 64.5 x 1.5 50 x 64.5 x 1 32.5 x 37 x 1.6 42.5 x 62 x 1.5 28 x 58.7 x 1.5 33 x 65 x 1.5 36.5 x 72 x 2 CTS2.5UN/4UN/CTT2.5UK/T/J/E CTS6U/CTS10U CTS25U CTS25UN CTS35U CTS35UN CMT4/CMT4S/CMT4SU CSFL4U/4U(L)/CSDL4U CSC2.5T/CSCG2.5T CSC4T/CSCG4T CSC6T/CSCG6T Separator Plates Used for electrical separation of adjacent jumpers. They can be inserted after the terminal blocks have been assembled on DIN rail. There is no loss of width. SEPARATOR PLATES Cat. No. Std. Pk. Dimensions (H x L x W) Suitable for: SP2.5/4UN SP6/10U SPCDL4U SPCMB4 SPCDLG2.5 100 100 100 100 100 17.5 x 17.4 x 1.4 15.4 x 16.2 x 1.5 15.4 x 16.2 x 1.6 14.5 x 12 x 1.5 11 x 10.5 x 1 CTS2.5UN/4UN/CTT2.5UK/T/J/E CTS6U/CTS10U/16U CDL4U/CDL4U(I.S)/ CDL4U(E) Series CMB4 CDLG2.5 Protective Cover / Side Holding Plates For protection against dust and shock, transparent protective cover can be installed above the terminal block assembly with the aid of side/holding plates. The side holding plates can be fitted on 35 mm and 32 mm Din rails. These plates should be backed by standard end stops. CTSPC CSP1 150 mm* Assembled Block installed with Protective Cover For all Rail Mounting Terminals *Other lengths available on request. Mounting Accessories for CTSPC Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 95