EPDP1

PCB Mounting Tracks Narrow & Wide Mounting Track Extrusion and Components Mount standard or custom printed circuit boards in Mounting Tracks which can be conveniently DIN rail or panel mounted in your control panel or cabinet. These are the same tracks used for Altech interface modules. We now make them available to you to house and protect your custom boards, etc. Tracks are easily cut to size or can be ordered precut to specific lengths. They are easily assembled from standard components and snap onto 35mm DIN rail or can be panel mounted. For PC Board Widths 73mm (2.9 in.) W MTGTK1 EPS L EPDR1 Each track has two sets of printed circuit board guides to accept two alternate board widths. End Sections hold printed circuit boards securely in place and keep out foreign objects. DIN Rail Mount MTGF1 Panel Mount Part Number MOUNTING When mounting extrusions on DIN rail, order two or more DIN Rail mounting feet. These feet slide into grooves on the extrusion. Then attach two DIN Rail Mount End Sections with help of EPS screws. To panel mount, order two Panel Mount End Sections (and EPS screws), each with an integral mounting flange with a 6 x 8mm (.24 x .32 in.) hole slot. If desired, tracks can be direct mounted using double sided tape. Order two DIN rail mount end sections (and EPS screws). • Standard Lengths: 1m (3'-3") or 2m (6'-6") • Track Material: PVC • Temperature Limit: Short Term - 80˚C (176˚F) Continuous - 70˚C (158˚F) • End Section, Foot Material: Polyamide • Preassembled, Precut Lengths Available • Tracks Accept Standard MT2 Marking Tags Mounting Track 1 meter, grey 2 meter, grey 1 meter, green* 2 meter, green* MTGTK1/1M MTGTK1 MTGTK1/1M/G MTGTK1/G Std. Pk. 5 5 5 5 Accessories DIN Rail Mount End Section, grey DIN Rail Mount End Section, green* EPDR1 EPDR1/G 100 100 DIN Rail Mounting Foot, grey DIN Rail Mounting Foot, green* MTGF1 MTGF1/G 100 100 Panel Mount End Section, grey Panel Mount End Section, green* EPDP1 EPDP1/G 100 100 DIN Rail / Panel Mount End Section Screws #4x1/2”, Phillips Pan head (2 required per end section) EPS 200 Marking Tags MT2 100 Narrow Mounting Track 73 Sizing Information 2 Track Type MTGTK1 16 Printed Circuit Board Width 11.4 69 High Guide (HG) 73 ± 1mm (2.9 ± 0.05 in.) 84 PCB MOUNTING TRACK (73 mm) Extrusion Length = Printed Circuit Board Length – 4.5mm (.175 in.) 15 Mounting Track Extrusion "Cut-to-Size" Formula 15 35 82 * Green color available on request. Contact Altech for more information. 46 DIN RAIL MOUNTING FOOT (73mm) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com DATA SUBJECT TO CHANGE WITHOUT NOTICE