HCL8-2

Eurostrips® EXTERNAL JUMPERS Accessories Convenient options that facilitate installation and wire termination. External Jumpers Bus potentials between poles on Eurostrip Terminal Strips reducing wiring time and eliminating wire jumpers. Jumper Pole positions may be removed to provide selective jumpering. When using external jumpers, the terminal's rated cross section is usually reduced one wire size. For jumper maximum current ratings, refer to the corresponding Eurostrip IEC/VDE current rating. External Jumper HCL8 HCL10 HCL12 HCL15 Eurostrip HE1 HE4 HE6 HE10, HE16 Pole Spacing 8mm (.315) 10 mm (.394 in.) 12 mm (.472) 15 mm (.591 in.) Ordering Information 2 pole 3 pole 4 pole 12 pole Cat. No. HCL8-2 HCL8-3 HCL8-4 HCL8-12 Std. Pk. 100 100 100 25 Cat. No. HCL10-2 HCL10-3 HCL10-4 HCL10-12 Std. Pk. 100 100 100 25 Cat. No. HCL12-2 HCL12-3 HCL12-4 HCL12-12 Std. Pk. 100 100 100 25 Cat. No. Std. Pk. HCL15-2 100 HCL15-3 100 HCL15-4 100 HCL15-12 25 • Material: copper alloy, nickel plated • Insulation: polyamide 6.6 • Color: black. Isolation Partitions Isolation Partition KA provides separation between adjacent poles of different potentials on 600V Eurostrips with standoff feet. Visual separation between poles is also provided by an isolation partition, assisting circuit identification and increasing wiring efficiency ISOLATION PARTITION • Material: polyamide 6.6 • Color: black 98 Isolation Partition KA46 Eurostrip HE4HN, HE6H Thickness 3.4 mm (.134 in.) Ordering Information Cat. No. Std. Pk. HEP4/6H 5 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com