P2APX

6 revision for dwg # 1PB-P2APx 5 rev - ch.no. - description original design 2 1 date 11/5/2007 revised by Philipp E. n24.5 mm [1.0 in] n28.8 mm max. 4 mm [.16 in] 18 mm [.7 in] 42 mm [1.7 in] 66 mm [2.6 in] 90 mm [3.5 in] 4 3 11 mm [.4 in] 19.5 mm [.8 in] ITEM DESCRIPTION 1* Push Button, Projecting Up tp six switch contacts can be installed. 2* 3* 4* 5 Rubber Gasket Mounting Nut Mounting Bracket Panel * = Push button is supplied with rubber gasket, mounting nut and mounting bracket (ITEM 1,2,3 and 4) ** = Switch Contacts must be ordered separatly unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL This Drawing is the property of R 6** Switch Contacts and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. CAT. NO. P2AP2 P2AP3 P2AP4 P2AP6 P2AP8 2PRG1 P2MN P2BRK S1 S2 S3 S4 COLOR MIN. QTY. MAX. QTY. Black 1 1 Green 1 1 Red 1 1 Blue 1 1 Yellow 1 1 Black 1 1 Black 1 1 Black 1 1 Green 1 6 Red 1 6 Green/Gray 1 6 Red/Gray 1 6 titel 22 mm Thermoplastic Enclosure Projecting Push Button P2APx (x=color) 11/5/2007 11/5/2007 11/5/2007 = = = = ±0.5 mm ±0.2 mm − mm ±1 mm M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal drawing no.: rev.: - 1PB-P2APx scale: sheet: 1 of: 1 [1.1 in]