P2AS2-X

6 5 3 POSITION SELECTOR SWITCH CONTACT BLOCK OPERATION GUIDE revision for dwg # 1PB-P2AS2-x rev - ch.no. 2 CONTACT BLOCK GUIDE × × × × × × × × × 1 NO (left) 2 NC in series (side × side) 1 NO (right) 1 NC (right) 1 NC (left) 2 NO in parallel (side × side) description original design 1 date 11/5/2007 revised by Philipp E. (Left or right as seen from front of operator) max. 4 mm [.15 in] 23 mm [.9 in] 47 mm [1.8 in] 71 mm [2.8 in] 95 mm [3.7 in] 4 10.5 mm [.4 in] 24.4 mm [1.0 in] 3 ITEM DESCRIPTION Up tp six switch contacts can be installed. * = Selector Switch is supplied with rubber gasket, mounting nut and mounting bracket (ITEM 1,2,3 and 4) ** = Switch Contacts must be ordered separatly unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL This Drawing is the property of R CAT. NO. P2AS2-1 1* Selector Switch P2AS2-3 P2AS2-4 2* Rubber Gasket 2PRG1 3* Mounting Nut P2MN 4* Mounting Bracket P2BRK 5 Panel S1 S2 6** Switch Contacts S3 S4 COLOR Black Black Black Black Black Black Green Red Green/Gray Red/Gray Type Maintained/2 Position Maintained/3 Position Momentary/3 Position - MIN. QTY. MAX. QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 6 1 6 1 6 = = = = ±0.5 mm ±0.2 mm − mm ±1 mm M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel 22 mm Thermoplastic Enclosure Selector Switch P2AS2-x (x=type) 11/5/2007 11/5/2007 11/5/2007 drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal drawing no.: 1PB-P2AS2-x scale: - sheet: 1 of: 1 28 mm [1.1 in] rev.: -