Page 1 of 2
Arria 10 GX Transceiver Signal Integrity Development Kit
Introduction
Altera’s Transceiver Signal Integrity Development Kit, Arria® 10 GX Edition helps you thoroughly evaluate the signal integrity of Arria 10 GX
transceivers. This development kit delivers a complete design environment that includes all hardware and software you need to start taking
advantage of the performance and capabilities available in Arria 10 GX FPGAs.
Figure 1. Arria 10 GX Transceiver Signal Integrity Development Kit
With this kit, you can:
Evaluate transceiver performance from 1 Gbps up to 17.4 Gbps (GX)
Generate and check pseudo-random binary sequence (PRBS) patterns via an easy-to-use GUI
Dynamically change differential output voltage (VOD), pre-emphasis, and equalization settings to optimize transceiver performance
for your channel
Perform jitter analysis
Verify physical medium attachment (PMA) compliance to PCI Express®(PCIe®), Gbps Ethernet (GbE), XAUI, CEI-6G, Serial RapidIO®,
high-definition serial digital interface (HD-SDI), and other major standards
Figure 2. Arria 10 GX Transceiver Signal Integrity Development Kit Block Diagram
Page 2 of 2
Table 1. Ordering Information
Ordering Code
DK-SI-10AX115S-A
Ordering Information
1
This development kit features a 10AX115S2F45I1SG device and a one-year license for the Quartus® II design software.
Notes:
1.
Please contact Altera for shipping availability
Table 2. Development Kit Contents
Hardware
Arria 10 GX Transceiver Signal Integrity Development board running on Arria 10 GX
10AX115S2F45I1SG FPGA
Six full-duplex transceiver channels with 2.4 mm SMA connectors
Four full-duplex transceiver channels to Amphenol Xcede+® backplane connector
Four full-duplex transceiver channels to CFP2 optical interface
Four full duplex transceiver channel to QSFP+ optical interface
Single transceiver channel to SFP+ optical interface
Ten full-duplex transceiver channels to Samtec Bullseye high-density connector
Character LCD
Ethernet PHY
AC adapter power cables
Ethernet and USB cables
Software1
Design examples
Board Update Portal design
Board Test System (BTS) design
Documentation
Arria 10 GX Transceiver Signal Integrity Development Kit
User Guide
Board design files
Design software2
Quartus II software (required)
Nios® II processor (optional)
MegaCore® intellectual property (IP) library (optional)
Mentor Graphics® ModelSim®-Altera software (optional)
Notes:
1.
Download and install Arria 10 GX FPGA Development Kit installer first
2.
A one-year license for Quartus II development software ships with the development kit
Privacy Legal Contact Us Careers Investor Relations Press CA Supply Chain Act
© 1995-2015 Altera Corporation.
All Rights Reserved.
https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-a10-gx-si.html
8/6/2015
很抱歉,暂时无法提供与“DK-SI-10AX115S-A”相匹配的价格&库存,您可以联系我们找货
免费人工找货