AME385AEAT

AME AME385-1.2 n General Description The AME385-1.2 is a micropower 2-terminal band-gap voltage regulator diode. It operates over a 30µA to 20mA current range. Each circuit is trimmed at wafer sort to provide a ± 0.5% initial tolerance. The design of the AME385-1.2 allows for a large range of load capacitances and operating currents. The low start-up current makes these parts ideal for battery applications. AME offers this part in a TO-92 and SOP-8 packages as well as the space saving SOT-23. Shunt Bandgap Voltage Reference n Functional Block Diagram VR Bandgap Cell Feedback Current Shunt n Features l Small Packages: SOT-23, TO-92, SOP-8 l Tolerates Capacitive Loads l Fixed Reverse Breakdown Voltage of 1.235V l Tight Voltage Tolerance ------- ±0.5% l Wide Operating Current ------- 30µA to 20mA l Wide Temperature Range ----- -40oC to +85oC l Low Temperature Coefficient --100ppm/oC (max) l Excellent Transient Response l All AME's Lead Free Products Meet RoHS Standards. RS VR VS VS GND n Typical Application n Applications l Portable Electronics l Power Supplies l Computer Peripherals l Data Acquisition Systems l Battery chargers l Consumer Electronics VS - VR RS = I 0.1µ F Value optional VR = 1.235V Rev.G.03 1 AME AME385-1.2 n Pin Configuration SOP-8 Top View 8 7 6 5 Shunt Bandgap Voltage Reference SOT-23 Top View AME 385-1.2 1. NC 2. NC 3. NC 4. 1 2 3 AME 385-1.2 1. 2. + - AME385 AME385 3. NC* 5. NC 6. NC 1 2 3 4 7. NC 8. + * Die Attach: Conductive Epoxy * Die Attach: Non-Conductive Epoxy TO-92-3 Top View AME 385-1.2 TO-92-2 Top View AME 385-1.2 AME385 1. NC* 2. 3. + - AME385 1. + 2. - * Die Attach: Non-Conductive Epoxy * Die Attach: Non-Conductive Epoxy 1 2 3 1 2 * The NC pin must float or be connected to - (negative) 2 Rev.G.03 AME AME385-1.2 n Ordering Information AME385 x x x x x - x Special Feature2 Special Feature1 Number of Pins Package Type Operating Ambient Temperature Range Accuracy Shunt Bandgap Voltage Reference Accuracy Operating Ambient Temperature Range Package Type Number of Pins A: 8 S: 2 T: 3 Special Feature1 Special Feature2 (For TO-92 Package Only) Package Lead Pitch Taping 5.08mm 2.54mm Bulk A: 0.5% (SOT-23) (SOP-8) (TO-92-2) (TO-92-3) E: -40OC to +85OC A: TO-92 E: SOT-2X H: SOP Z: Lead Free N/A: 1: Rev.G.03 3 AME AME385-1.2 n Ordering Information (contd.) Part Number AME385AEET AME385AEETZ Shunt Bandgap Voltage Reference Marking* ABXww ABXww Accuracy 0.5% 0.5% Package SOT-23 SOT-23 Operating Ambient Temperature Range - 40oC to +85oC - 40oC to +85oC 4 AME 385 AME385AEAS 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEAS-1 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEASZ 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEASZ-1 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEAT 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEAT-1 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEATZ 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEATZ-1 0.5% TO-92-3 - 40oC to +85oC AEAT yyww 385 AME385AEHA AEHA 0.5% SOP-8 - 40oC to +85oC yyww 385 AME385AEHAZ AEHA 0.5% SOP-8 - 40oC to +85oC yyww Note: ww & yyww represents the date code pls see the Date Code Rule on Package Dimension. * A line on top of the first letter represents lead free plating such as ABXww. Please consult AME sales office or authorized Rep./Distributor for the availability of voltage accuracy and package type. Rev.G.03 AME AME385-1.2 n Absolute Maximum Ratings Parameter Supply Current Shunt Bandgap Voltage Reference Maximum 50 Unit mA Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device n Recommended Operating Conditions Parameter Ambient Temperature Range Junction Temperature Range Storage Temperature Range Supply Current Symbol TA TJ TSTG Rating - 40 to +85 - 40 to +125 - 65 to +150 100µA ~ 20mA Unit o C C C o o n Electrical Specifications Unless otherwise specified, TA = 0~70OC, IR = 100µA Parameter Reference Voltage, ±0.5% Reference Voltage Change With Current Reverse Dynamic Impedence Wideband Noise (rms) Long term Stability Reference Voltage Temp. Coeff. Operation Current VREFTC IOP Symbol VREF dV REF/I Test Condition IREF = 100µA IMIN < I < 1 mA 1mA < I < 2 0mA IR = 100µA, f=20Hz IR = 100µA, 10 Hz