AME385FEATZ-1

AME AME385-2.5 n General Description The AME385-2.5 is a micropower 2-terminal band-gap voltage regulator diode. It operates over a 30µA to 20mA current range. Each circuit is trimmed at wafer sort to provide a ± 0.50% and ± 0.80% initial tolerance. The design of the AME385-2.5 allows for a large range of load capacitances and operating currents. The low start-up current makes these parts ideal for battery applications. AME offers this part in a TO-92 and SOP-8 packages as well as the space saving SOT-23. Shunt Bandgap Voltage Reference n Functional Block Diagram VR Bandgap Cell Current Shunt n Features l Small Packages: SOT-23, TO-92, SOP-8 l Tolerates Capacitive Loads l Fixed Reverse Breakdown Voltage of 2.5V l Tight Voltage Tolerance ------- ±0.50%, ±0.8% l Wide Operating Current ------- 30µA to 20mA l Wide Temperature Range ----- -40oC to +85oC l Low Temperature Coefficient --100ppm/oC (max) l Excellent Transient Response l All AME’ s Lead Free Products Meet RoHS Standards VS GND n Typical Application RS VR n Applications l Portable Electronics l Power Supplies l Computer Peripherals l Data Acquisition Systems l Battery Chargers l Consumer Electronics VS - VR RS = I 0.1µF Value optional VR = 2.5V Rev.G.03 1 AME AME385-2.5 n Pin Configuration SOP-8 Top View 8 7 6 5 Shunt Bandgap Voltage Reference SOT-23 Top View AME 385-2.5 1. NC 2. NC 3. NC 4. * Die Attach: 1 2 3 AME 385-2.5 1. + 2. - AME385 AME385 3. NC* 5. NC 6. NC 1 2 3 4 Non-Conductive Epoxy 7. NC 8. + * Die Attach: Conductive Epoxy TO-92-3 Top View TO-92-2 Top View AME 385-2.5 http://tw.club.yahoo.com/clubs/Tsao 1. NC* 2. 3. + * Die Attach: * Die Attach: Non-Conductive Epoxy Non-Conductive Epoxy AME 385-2.5 1. + 2. - AME385 AME385 1 2 3 1 2 * The NC pin must float or be connected to - (negative) 2 Rev.G.03 AME AME385-2.5 n Ordering Information AME385 x x x x x - x Special Feature2 Special Feature1 Number of Pins Package Type Operating Ambient Temperature Range Accuracy Shunt Bandgap Voltage Reference Accuracy Operating Ambient Temperature Range E: -40OC to +85OC Package Type Number of Pins A: 8 S: 2 T: 3 Special Feature1 Special Feature2 (For TO-92 Package Only) Package Lead Pitch Taping 5.08mm Bulk 2.54mm B: 0.5% (SOT-23) (SOP-8) A: TO-92 E: SOT-2X H: SOP Z: Lead Free N/A: 1: F: 0.8% (TO-92-2) (TO-92-3) Rev.G.03 3 AME AME385-2.5 n Ordering Information (contd.) Part Number AME385BEET AME385BEETZ AME385BEHAZ Shunt Bandgap Voltage Reference Marking* ABYww ABYww 385 BEHA yyww AME 385 FEAT yyww AME 385 FEAT yyww AME 385 FEAS yyww AME 385 FEAS yyww Accuracy 0.5% 0.5% 0.5% Package SOT-23 SOT-23 SOP-8 Operating Ambient Temperature Range - 40oC to +85oC - 40oC to +85oC - 40oC to +85oC AME385FEATZ 0.8% TO-92-3 - 40oC to +85oC AME385FEATZ-1 0.8% TO-92-3 - 40oC to +85oC AME385FEASZ 0.8% TO-92-2 - 40oC to +85oC http://tw.club.yahoo.com/clubs/Tsao 0.8% TO-92-2 - 40oC to +85oC AME385FEASZ-1 Note: yyww & ww represents the date code and pls refer to Date Code Rule page on Package Dimension. * A line on top of the first letter represents lead free plating such as ABY. Please consult AME sales office or authorized Rep./Distributor for the availability of voltage accuracy and package type. 4 Rev.G.03 AME AME385-2.5 n Absolute Maximum Ratings Parameter Supply Current Shunt Bandgap Voltage Reference Maximum 50 Unit mA Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device n Recommended Operating Conditions Parameter Ambient Temperature Range Junction Temperature Range Storage Temperature Range Supply Current Symbol TA TJ TSTG Rating - 40 to +85 - 40 to +125 - 65 to +150 100µA ~ 20mA Unit o C C C o o n Electrical Specifications Unless otherwise specified, TA = 0 to 70OC, I = 100µA Parameter Reference Voltage, ±0.5% Reference Voltage, ±0.8% Minimum Current Reference Voltage Change With Current Maximum Operation Current Symbol VREF IMIN dV REF/I IMIN < I < 1mA 1mA < I < 20mA 20 1.5 5 Test Condition IREF = 100µA Min 2.487 2.480 Typ 2.50 2.50 Max 2.513 2.520 30 3 mV 20 mA Units V V µA ILmax Reverse Dynamic Impedence Wideband Noise (rms) Long term Stability Reference Voltage Temp. Coeff. RDI Vn IR= 100mA, f=20Hz IR= 100mA, 10 Hz