ASEV30-B

ASEV30 Series DC Contactor Specification 30AMPS/900VDC Application 1. Power supply / motor control, circuit insulation, circuit protection and safety devices for industrial machinery 2. Charging pill, Electric vehicle etc. Features HIGH CURRENT AND HIGH VOLTAGE Nitrogen sealed contacts to minimize arcing, up to 900VDC load is available. COMPACT STRUCTURE, LOW NOISE Contact design yields reduced unit size, low noise while carrying or switching current. HIGH SAFETY There is no arc leakage due to tight sealing. HIGH CONTACT RELIABILITY Stable contact resistance no matter how harsh the environment with sealed contacts NO SPECIAL MOUNTING REQUIREMENT Light weight actuator is less impacted by gravity with no special mounting orientation requirements. VARIOUS APPLICATIONS Application includes battery switch and standby equipment, DC power control, circuit protection, etc. EU ROHS DIRECTIVE (2011/65/EU) COMPLIANT Nomenclauture Example ASEV30 — B Series code: “ASEV30” = ASEV30 Series Coil Voltage Code: “B” = 12 VDC “C” = 24 VDC 1 ASEV30 Series DC Contactor Specification 30AMPS/900VDC Performance Data MAIN CONTACT LIFE Contact arrangement 1 Form X (SPST-NO, DM) 30A @+450VDC (make/break) 10,000 cycles Rated Operating Voltage 12-900VDC 30A @+750VDC (make/break) 4,000 cycles Continuous (Carry) Current 30A*1 Mechanical life 200,000 cycles Short term 50A (3 minutes)*2 Max short circuit current 1,250A (1/2 cycle, 60Hz) (through closed contacts) Dielectric Withstanding Voltage Between open contacts: 5,600Vrms/8,000Vdc Between contact and coil: 2,200Vrms/4,000Vdc Insulation Resistance Terminal to Terminal/ Terminal to coil New: Min 100 MΩ @500Vdc End of life: Min 50 MΩ @500Vdc Voltage Drop (@30A) ≤60mV ENVIRONMENTAL DATA OPERATE / RELEASE TIME Shock, 11ms ½ sine, operating 20G Peak Close (includes bounce) 25ms, Max. Vibration, Sine, Peak, 20G 55—2,000Hz Release 10ms, Max. Operating Ambient Temperature -40 to +85˚C Noise (@100mm) 70dB(a) Altitude