Solid State Relay
SC Series Single Phase AC Output
• Opto-isolation
• Load Current:0.1A-2A @24-280VAC
• Control Current :10mA or Control Voltage:5VDC,12VDC,24VDC
• Dielectric Strength:2500VACrms
• TRIAC Output
• PCB Mounted
• RoHS Compliant
Product Description
ASR-SC series is printed board mounted solid state relay. Control current is 10mA or control voltage is 5VDC,
12VDC or 24VDC, load voltage is 240VAC. Optoisolation between input and output, zero crossing and random-on
output mode available.
Product Selection
ASR
—
SC
240
D
2
Z
-N
F
Packing:
- : Bulk
Packing
A-Z
SC Series
Load Voltage
240: 240VAC
Control
Voltage Type
D:DC Control
Load Current
1:1Amp
2:2Amp
Switching
Mode
Z:Zero
Crossing
R:Random
Control
Voltage/
Current
N:5VDC
P:12VDC
R:24VDC
C:10mA
Pin Layout
Blank:
Standard
F:T Type
Footprint
INPUT CIRCUIT
Control Voltage Range
5
4~6VDC
12
9.6~14.4VDC
24
19.2~28.8VDC
Must Turn-on Voltage
5
4VDC
12
9.6VDC
24
19.2VDC
Must Turn-off Voltage
5/12/24
1.0VDC
Maximum Input Current
5/12/24
25mA (@max. input Voltage)
1
Solid State Relay
SC Series Single Phase AC Output
OUTPUT CIRCUIT
Load Voltage Range
24~280VAC
Transient Overvoltage
600Vpk
Maximum Surge
Current [@10 ms]
1A
25Apk
Maximum Turn-on Time
Random-On
1ms
Zero Crossing
10ms
2A
35Apk
Maximum Turn-off Time
10ms
Load Current Range
1A
0.1~1A
2A
0.1~2A
Maximum Off-state Leakage
Current [@ Rated Voltage]
0.1~2A
Maximum On-state Voltage
Drop [@ Rated Current]
1.5Vrms
Minimum Off-state dv/dt
[@ Maximum Rated Voltage]
200V/μs
Operational Frequency Range
47-63Hz
Minimum Power Factor
(@ Maximum load)
0.5
GENERAL INFORMATION
Dielectric Strength,
Input/Output[50/60Hz]
2500VACrms
Insulation Resistance
1000MΩ(@500VDC)
Ambient Operating
Temperature Range
-30˚C +80˚C
Weight [Typical]
3g
2
Solid State Relay
SC Series Single Phase AC Output
Application Note:
Suitable for pumps, valve control, motor control and etc.
(0.69)
(0.15)
A) Standard Footprint
(0.81)
(0.22)
(0.03)
(0.04)
(0.30)
(0.30)
(0.02)
(0.07)
(0.10)
(0.69)
(0.15)
B) T Type Footprint
(0.81)
(0.04)
(0.20)
(0.40)
(0.22)
(0.03)
(0.10)
(0.02)
(0.07)
3
Solid State Relay
SC Series Single Phase AC Output
Wiring Diagram
Thermal Curve
Important Notice
1. Soldering must be finished within 10 seconds at 260˚C,or finished within 5 seconds at 350˚C. Otherwise it may
cause damage to the relay.
2. Terminal polarity must be observed. Otherwise it may cause damage to the relay.
3. When ambient temperature is above 25˚C, the maximum load current decreases. See thermal derating curve.
Product Certification
1741 Industrial Drive, No. 14 • Sterling, IL 61081
Tel: 815-632-3150 • Fax: 815-632-3449
www.altranmagnetics.com • sales@altranmagnetics.com
4
很抱歉,暂时无法提供与“ASR-SC240D2ZP-F”相匹配的价格&库存,您可以联系我们找货
免费人工找货