ASR-SD380D5ZL

Solid State Relay SD Series Single Phase AC Output • • • • • • ASR Zero crossing or random-on switching Ratings from 3A,5A @ 24-530VAC Control voltage: 4-15VDC, 15-32VDC And 4-32VDC Opto-isolation: 4000VACrms TRIAC output(3A) or SCR output(5A) RoHS compliant — SD 380 D 5 Z R L Packing: - : Bulk Packing A-Z SC Series Load Voltage 240:240VAC 380:380VAC 480:480VAC Control Voltage D:DC Control Load Current 3:3Amp 5:5Amp Switching Mode Z:Zero crossing R:Random-on Control Voltage/ Current N:5VDC P:12VDC R:24VDC C:10mA Other L:4-15VDC H:15-32VDC W:4-32VDC INPUT CIRCUIT (TA=25˚C) Control Voltage Range -L 4-15VDC -H 15-32VDC -W 4-32VDC Must Turn-on Voltage -L 4VDC -H 15VDC -W 4VDC Must Turn-off Voltage -H 5VDC -L,-W 1VDC Maximum Input Current 5/12/24 25mA (@max. input Voltage) 1 Solid State Relay SD Series Single Phase AC Output OUTPUT CIRCUIT (TA=25˚C) Load Voltage Range 240VAC 24~280VAC 380VAC 24~440VAC 480VAC 24~530VAC Transient Overvoltage 240VAC 600Vpk 380VAC 800Vpk 480VAC 1200Vpk Load Current Range 3A 0.1~1A 5A 0.1~5A Maximum Turn-On Time Random-On 1ms Zero Crossing 10ms Maximum Turn-Off Time 10ms Maximum Surge Current [@10 ms] 3A 160A 5A 250A Maximum Off-State Leakage Current [@ Rated Voltage] 5mA Maximum On-State Voltage Drop [@ Rated Current] 1.5Vrms Minimum Off-State dv/dt [@ Maximum Rated Voltage] 3A 200V/μs 5A 500V/μs GENERAL INFORMATION (TA=25˚C) Dielectric Strength, Input/Output[50/60Hz] 400VACrms Insulation Resistance (@500VDC) 1000MΩ(@500VDC) Ambient Operating Temperature Range -30˚C +80˚C Ambient Storage Temperature Range -30˚C +80˚C Weight [Typical] 20g 2 Solid State Relay (1.38) Installation (1.75) (0.40) (0.20) (0.50) (1.02) SD Series Single Phase AC Output Wiring Diagram (0.41) (0.11) (0.30) Thermal Curve Important Notice 1. Soldering must be finished within 10 seconds at 260˚C,or finished within 5 seconds at 350˚C. Otherwise it may cause damage to the relay. 2. Terminal polarity must be observed. Otherwise it may cause damage to the relay. 3. When ambient temperature is above 25˚C, the maximum load current decreases. See thermal derating curve. Product Certification 1741 Industrial Drive, No. 14 • Sterling, IL 61081 Tel: 815-632-3150 • Fax: 815-632-3449 www.altranmagnetics.com • sales@altranmagnetics.com 3