ASR-SLE60D20-H

Solid State Relay ASR-SLE Series Single Phase DC Output • • • • • • MOSFET or Transistor Output* Control Voltage: 3-10VDC, 10-28VDC Load Voltage: 60VDC, 100VDC, 200VDC, 400VDC Load Current: 20A Dielectric Strength: 2500Vrms (MOSFET) or 4000Vrms (Transistor) RoHS Compliant *Transistor Output is for 3A model, all others are MOSFET ASR — SLE Packing: - : Bulk Packing A-Z ASR-SLE Series 60 20 -L Load Current 3:3Amp 5:5Amp 10:10Amp 20:20Amp Control Voltage L:3-10VDC H:10-28VDC D Load Voltage Control 60:0-50VDC Voltage 100:0-75VDC D:DC Control 200:0-125VDC 400:0-300VDC NOTE: PART NUMBERS ARE AS FOLLOWS 3A 5A 10A 20A ASR-SL400D3-L ASR-SLE200D5-L ASR-SLE100D10-L ASR-SLE60D20-L ASR-SL400D3-H ASR-SLE200D5-H ASR-SLE100D10-H ASR-SLE60D20-H L 3-10VDC H 10-28VDC L 3VDC H 10VDC INPUT CIRCUIT(TA=25˚C) Control Voltage Range Must Turn-On Voltage Must Turn-Off Voltage 1VDC Maximum Input Current 20mA 1 Solid State Relay ASR-SLE Series Single Phase DC Output OUTPUT CIRCUIT(TA=25˚C) Load Voltage Range Maximum Transient Overvoltage (MOSFET) Maximum 1 Cycle Surge Current (50Hz) 60VDC 0-50VDC 100VDC 0-75VDC 200VDC 0-125VDC 400VDC 0-300VDC 60VDC 100Vpk 100VDC 150Vpk 200VDC 250Vpk 400VDC 650Vpk 3A 15A 5A 25A 10A 50A 20A 100A Maximum Turn-On Time 1ms Maximum Turn-Off Time 1ms Maximum Off-State Leakage Current [@ Rated Voltage] Maximum On-State Resistance Transistor output 1mA MOSFET output 0.1mA 3A 400mΩ 5A 150mΩ 10A 38mΩ 20A 10mΩ GENERAL INFORMATION (TA=25˚C) Dielectric Strength, Input/Output (50/60Hz) Transistor output 4000Vrms MOSFET output 2500Vrms Insulation Resistance(@500VDC) 1000MΩ Ambient Temperature Range -30˚C +80˚C Storage Temperature Range -30˚C +100˚C Weight (typical) 20g 2 Solid State Relay ASR-SLE Series Single Phase DC Output Application Note: Suitable for DC motors, DC power supplies, electro-mechanical devices, and etc. Dimensions 3A, 5A, 10A models 20A model Thermal Curve Important Notice 1. cause damage to the relay. y 2. Terminal polarity must be observed. Otherwise it may cause damage to the relay. 3. When ambient temperature is above 25˚C, the maximum load current decreases. See thermal derating curve. 1741 Industrial Drive, No. 14 • Sterling, IL 61081 Tel: 815-632-3150 • Fax: 815-632-3449 www.altranmagnetics.com • sales@altranmagnetics.com 3