ASR-SMA240D2ZP

Solid State Relay SMA Series Single Phase AC Output • • • • • • • ASR Optoelectronic Isolation TRIAC Output Load Voltage:240VAC Load Current:1A,2A Dielectric Strength 2500VACrms PCB Mounted RoHS Compliant — SM A Packing - : Bulk pack A-Z SM Series Load Type A:AC Load 240 D Load Voltage DC Control 240:240VAC 1 R N -K Load Current 1: 1Amp 2: 2Amp Switching Mode Z:Zero Crossing R:Random-on Control Voltage N: 5VDC P: 12VDC R: 24VDC S: 48VDC T: 60VDC None: No Socket K: with Socket Technical Specification INPUT CIRCUIT(TA=25˚C) Control Voltage Range N 4-6VDC P 9.6-14.4VDC R 19.2-28.8VDC S 38.4-57.6VDC T 48-72VDC Must Turn-on Voltage (1) N 4VDC P 9.6VDC R 19.2VDC S 38.4VDC T 48VDC Must Turn-off Voltage 1VDC Maximum Input Current 25mA 1 Solid State Relay SMA Series Single Phase AC Output OUTPUT CIRCUIT(TA=25˚C) Load Voltage Range (47Hz-63Hz) 24-280VAC Maximum Transient Overvoltage 600Vpk Load Current Range 1A 0.1 - 1A 2A 0.1 - 2A Maximum Turn-On Time Random-on 1ms Zero Crossing 10ms Maximum Turn-Off Time 300μs Maximum Surge Current [@10 ms] 1A 30A 2A 40A Maximum Off-State Leakage Current [@ Rated Voltage] 1.5mA Maximum On-State Voltage Drop [@ Rated Current] 1.5Vrms Maximum On-State Voltage Drop [@ Rated Current] 200V/μs GENERAL INFORMATION (TA=25˚C) Dielectric Strength, Input/Output(50/60Hz) 2500Vrms Insulation Resistance(@500VDC) 1000MΩ Ambient Operating Temperature Range -30˚C +80˚C Ambient Storage Temperature Range -30˚C +100˚C Weight (Typical) ASR-SM240...-…Series 4g ASR-SM240...-…K Series 30g 2 Solid State Relay Installation SSR (1.10) (1.10) (0.20) (0.20) (0.02) (0.02) (0.07) (0.07) (0.64) (0.64) (0.20) (0.24) (0.04) (0.04) (0.02) (0.15) (3.19) SMA Series Single Phase AC Output (0.05) (1.36) (0.20) (3.80) With Socket Wiring Diagram ASR-SMD…D...-NK Series ASR-SMD...D...-P/R/S/TK Series 3 Solid State Relay SMA Series Single Phase AC Output Attentions: 1. Soldering must be finished within 10 seconds at 260˚C,or finished within 5 seconds at 350˚C. Otherwise it may cause damage to the relay. 2. When connecting wiring to SSR please ensure screws are torqued down properly 4.43 in-lb, 0.5 N·m3. 3. When ambient temperature is above 25˚C or tight installation required, the maximum load current decreases. See thermal derating curve. 2. Terminal polarity must be observed. Otherwise it may cause damage to the relay. Product Certification 1741 Industrial Drive, No. 14 • Sterling, IL 61081 Tel: 815-632-3150 • Fax: 815-632-3449 www.altranmagnetics.com • sales@altranmagnetics.com 3