A-SP1943R6GHB1C-C01-2T

======================================================== 客户（Customer）: 承认书 Approval Sheet 谨致执事者：兹提供敝公司之有关详细规格及图面数据,敬请给予办理试认定手续. 同时敬请送返一份附有贵公司签认之测试认定后之样品承认书. We are pleased in sending you herewith on specification and drawings for your approval. Please return to us one copy “Approval sheet” with your approved signature. 型号 (Model No.) : A-SP1943R6GHB1C-C01-2T 发文日期（Issue Date）: 2017/09/08 承认日期（Approved Date）: Checking signature of Amicc Designer Checker Approver Approval signature of customer Designer Checker Approver Silence 常州市欧密格光电科技有限公司 Changzhou Amicc Opto-Electronics Technology Co.LTD 江苏省常州市湖塘鸣凰沟南工业区 GouNan industrial park HuTang ChangZhou TEL:0086-519-86525868 FAX:0086-519-86523668 1 Release Date: 08.Sep.2017. Issue No: V5 Issue No:ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Features ‧Multi-Color Type ‧Compatible with infrared and vapor phase reflow solder process. ‧Wide viewing angle ‧Pb-free ‧RoHS compliant Description ‧The Amicc 1943 SMD LED is much smaller than lead frame type components,thus enable smaller board size, higher packing density,reduced storage space and finally smaller equipment to be obtained. ‧Besides,lightweight makes them ideal for miniature applications etc. Applications ‧LCD Back-light ‧Decorative and Entertainment Lighting ‧Indicators ‧Automotive Telecommunication ‧Switch lights Device Selection Guide Type 2 Chip Materials Emitted Color R6 AlGaInp Brilliant Red GH InGaN Green B1 InGaN Blue Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 Resin Color Water Clear www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Absolute Maximum Ratings (TSoldering=25℃) Parameter Symbol Color Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1ms) Power Dissipation Electrostatic Discharge(HBM) IFP Pd ESD R6 60 GH 100 B1 100 R6 60 GH 95 B1 95 R6 2000 GH 150 B1 150 mA mW V Operating Temperature Topr -40~+85 ℃ Storage Temperature Tstg -40~+100 ℃ Soldering Temperature Tsol 3 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Electro-Optical Characteristics (TSoldering=25℃) Parameter Luminous Intensity Dominant Wavelength Forward Voltage Symbol Iv λd VF Color Min. Typ. Max. R6 36.0 ----- 90.0 GH 140.0 ----- 360.0 B1 22.5 ----- 90.0 R6 ----- 622 ----- GH 520.0 ----- 535.0 B1 465.0 ----- 475.0 R6 1.6 ----- 2.1 GH 2.5 ----- 3.1 B1 2.5 ----- 3.1 ----- 130 --------- Viewing Angle 2θ1/2 Spectrum Radiation Δλ Bandwidth Reverse Current IR Unit Condition mcd IF=5mA nm IF=5mA V IF=5mA ----- deg IF=5mA 20 ----- nm IF=5mA ----- 10 μA VR =5V Notes: 1. Tolerance of Luminous Intensity ±10%. 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage : ±0.1V. 4 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Bin Code Description R6: Bin Range of Luminous Intensity Bin Code Min. Max. NA 36.0 57.0 PA 57.0 90.0 Unit Condition mcd IF=5mA GH: Bin Range of Luminous Intensity Bin Code Min. Max. RA 140.0 225.0 SA 225.0 360.0 Unit Condition mcd IF=5mA B1: Bin Range of Luminous Intensity Bin Code Min. Max. MA 22.5 36.0 NA 36.0 57.0 PA 57.0 90.0 Unit Condition mcd IF=5mA Note: Tolerance of Luminous Intensity: ±10%. GH: Bin Range of Dominant Wavelength Bin Code Min. Max. A5 520.0 525.0 A6 525.0 530.0 A7 530.0 535.0 Unit Condition nm IF=5mA B1: Bin Range of Dominant Wavelength Bin Code Min. Max. A6 465.0 470.0 A7 470.0 475.0 Unit Condition nm IF=5mA Note: Tolerance of Dominant Wavelength: ± 1nm 5 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc GH: Bin Range of Forward Voltage Bin Code Min. Max. 9 2.5 2.7 10 2.7 2.9 11 2.9 3.1 Min. Max. 9 2.5 2.7 10 2.7 2.9 11 2.9 3.1 Unit Condition V IF=5mA Unit Condition V IF=5mA B1: Bin Range of Forward Voltage Bin Code Note: Tolerance of Forward Voltage: ±0.1V Spectrum Distribution 6 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc R6: Spectrum Distribution Luminous Intensity (%) 100 80 60 40 20 0 400 500 600 700 800 600 700 Wavelength (nm) GH: Spectrum Distribution 100 Luminous Intensity (%) 80 60 40 20 0 300 400 500 Wavelength (nm) B1: Spectrum Distribution Luminous Intensity (%) 100 80 60 40 20 0 300 400 500 600 700 Wavelength (nm) 7 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Typical Electro-Optical Characteristics Curve(Chip code: R6) Fig.1-Forword Voltage Shift vs. Juntion Temperature Fig.2-Relative Luminous Intensity vs. Forword Current Ts=25°C 1.6 Relative Luminous Intensity (Normalized at 20mA) Forword Voltage Shift -V 0.20 0.15 0.10 0.05 0.00 -0.05 -0.10 -0.15 -0.20 -50 -25 0 25 50 75 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 100 0 15 20 25 30 Fig.4-Forward Current vs. Forward Voltage Ta=25°C 200 1.4 Forward Current IF (mA) Relative luminous intensity (%) Fig.3-Relative Luminous Intensity vs.Juntion Temperature 1.2 1.0 0.8 0.6 0.4 0.2 -50 -25 0 25 50 75 100 100 10 1 1.0 1.5 2.0 2.5 3.0 Forward Voltage VF (V) Tj-Juntion Temperature (°C) Forward Current IF (mA) 10 Forward Current IF (mA) Tj-Juntion Temperature (°C) 50 5 Fig.6-Radiation Diagram Ta=25°C 0° 10° 20° 30° Fig.5-Max.Driving Forward Current vs.Soldering Temperture 40 40° 30 25 1.0 20 10 0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 85 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Soldering Temperature Ts (°C) 8 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Typical Electro-Optical Characteristics Curve (Chip code: GH/B1) Fig.1-Forword Voltage Shift vs. Juntion Temperature Fig.2-Relative Luminous Intensity vs. Forword Current Ts=25°C 1.6 Relative Luminous Intensity (Normalized at 20mA) Forword Voltage Shift -V 0.20 0.15 0.10 0.05 0.00 -0.05 -0.10 -0.15 -0.20 -50 -25 0 25 50 75 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 100 0 Tj-Juntion Temperature (°C) Fig.3-Relative Luminous Intensity vs.Juntion Temperature Forward Current IF (mA) Relative luminous intensity (%) 15 20 25 30 200 1.2 1.0 0.8 0.6 0.4 0.2 -50 -25 0 25 50 75 100 10 1 2.0 100 2.5 3.0 3.5 4.0 Forward Voltage VF (V) Tj-Juntion Temperature (°C) Forward Current IF (mA) 10 Fig.4-Forward Current vs. Forward Voltage Ta=25°C 1.4 50 5 Forward Current IF (mA) Fig.6-Radiation Diagram Ta=25°C 0° 10° 20° 30° Fig.5-Max.Driving Forward Current vs.Soldering Temperture 40 40° 30 25 1.0 20 0.9 50° 0.8 60° 10 70° 0.7 0 0 20 40 60 85 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Soldering Temperature Ts (°C) 9 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Package Dimension 1.6 Blue 2 3(Common anode) Polarity 1.5 Red 1 4 Green 0.2 0.4 1.0 Recommended Solder Pad 0.8 4 2 3 0.8 0.8 0.55 0.4 1 0.6 0.8 0.5 0.4 0.55 0.5 0.6 Note: Tolerance unless mentioned is ±0.1mm, Unit = mm. 10 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Note: Tolerances unless mentioned ±0.1mm, Unit = mm. 11 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Carrier Tape Dimensions: Loaded Quantity 2000pcs Per Reel Note: 1.Tolerance unless mentioned is ±0.1mm, Unit = mm. 2.Minimum packing amount is 1000pcs per reel. Moisture Resistant Packing Process Label Label Desiccant A l u m i n u m m orei s- tpur o o f b a g 12 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃/10sec. 6 Min. 22 PCS. 0/1 2 Thermal Shock H : +100℃ 5min ∫ 10 sec 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 L : -10℃ 5min 3 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 4 High Temperature/Humidity Reverse Bias Ta=85℃,85%RH 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Ta=-40℃ 1000 Hrs. 22 PCS. 0/1 6 High Temperature Storage Ta=100℃ 1000 Hrs. 22 PCS. 0/1 7 DC Operation Life Ta=25℃, IF = 5mA 1000 Hrs. 22 PCS. 0/1 13 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com DATASHEET Multi-Color Type  Top view Full-color A-SP1943R6GHB1C-C01-2T Amicc Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260 C Max. 10sec. Max. Above255 C 30sec.Max. 3 C/sec.Max. 6 C/sec.Max. Pre-heating Above 217 60~150 sec. 150~200 C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 14 Release Date: 08.Sep.2017. Issue No: V5 Issue No: ADE-1943-001 www.amicc.com