000-14625

NOTES: 1. REV MATERIALS AND FINISHES: BODY,CLAMP NUT,SHELL -BRASS,NICKEL PLATING CONTACT - BeCu, SILVER PLATING INSULATOR - TFE 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. DIELECTRIC WITHSTANDING VOLTAGE: 1500 VRMS,MIN. 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 C $ TO +165 C $ DESCRIPTION -- 0.163 BRAID 0.120 INNER CONDUCTOR DATE REDRAWN NO CHANGE N ------ SEE SHEET 1 4/30/13 ECO -----49490 RECOMMENDED CABLE STRIPPING DIMENSIONS 4. CABLE ASSEMBLY INSTRUCTIONS: A. STRIP CABLE AS SHOWN. B. SLIDE CLAMP NUT,WASHER,GASKET,SLEEVE OVER CABLE SHEATH. C. COMB OUT THE BRAID AND FOLD OUT,TRIM EXCESS BRAID. D. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH PROPER SPANNER. MAKE ENSURE INTERFACE DIMENSIONS TO MEET. 5. REVISIONS THIRD ANGLE PROJ. SCALE 2.000 PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 14625 AND DATE CODE" 1.000"APPROX 0.430 REF 0.573 3/8 HEX REF STAMP "AMPHENOL 14625" UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL SEE NOTES REFERENCE CONFIGURATION LEVEL: In Work FINISH DRAWN CLEMENT DATE 07-Mar-13 ENGINEER CLEMENT DATE 07-Mar-13 APPROVED K. CAPOZZI DATE 4/30/13 CAD FILE TITLE BNC PLUG(POLARIZED) FOR RG 58/U SCALE: 7.0:1.0 DWG SIZE B SHEET 2 OF 2 REV N Amphenol RF www.amphenolrf.com DRAWING NO. 14625 ITEM NO. 14625 PART NO. 14625 APPR -----CL