000-18750

NOTES: REVISIONS THIRD ANGLE PROJ. REV 1. MATERIALS AND FINISHES: REAR BODY, FRONT BODY, CLAMP NUT, SLEEVE, WASHER COUPLING NUT, OUTER CONTACT & CAP -BRASS, NICKEL PLATING CONTACT - BRASS, SILVER PLATING RETAINING RING - BRASS INSULATOR - PTFE , NATURAL GASKETS - SILICONE RUBBER, RED 2. ELECTRICAL: A. IMPEDANCE: -- ECO APPR REDRAWN IN PRO-E & COD ADDED 1/21/14 49831 RAK -- -- -- CAP 50 OHM SCALE 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 000-18750 , AND DATE CODE" 5. CABLE ASSEMBLY INSTRUCTIONS: A. STRIP CABLE AS SHOWN. B. SLIDE CLAMP NUT,WASHER,GASKET & SLEEVE OVER CABLE SHEATH. C. COMB OUT THE BRAID AND FOLD OUT,TRIM EXCESS BRAID. D. SOLDER CABLE CENTER CONDUCTOR TO CENTER CONTACT. E. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH PROPER SPANNER. MAKE ENSURE INTERFACE DIMENSIONS TO MEET. 0.250 REF * 6. CAP ASSEMBLY INSTRUCTIONS: A. PLACE GASKET ON CAP AS SHOWN B. ASSEMBLE CAP TO BODY WITH 6-10 IN-LBS TORQUE. * DATE RELEASE TO MFG Y 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $C TO +165 $C 7. DESCRIPTION 0.215 0.020 REF * 0.214 * 0.205 1.000 GASKET 0.125 REF 0.093 REF * 0.186 0.343 REF 0.422 1.533 REF SHOWS CABLE ENTRY DIMENSIONS. CLAMP NUT WASHER GASKET SLEEVE 0.250 0.125 0.234 CENTER CONDUCTOR 0.827 REF RECOMMENDED CABLE STRIPPING DIMENSIONS INTERFACE PER MIL-STD-348 SERIES:N PLUG UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL SEE NOTES REFERENCE CONFIGURATION LEVEL: In Work FINISH DRAWN ABHAYA KISHORE DATE 17-Dec-13 ENGINEER K. CAPOZZI DATE 12/17/13 APPROVED K. CAPOZZI DATE 1/21/14 CAD FILE TITLE TYPE N R/A PLUG FOR RG-58/U CABLE SCALE: 3.5:1.0 DWG SIZE B SHEET Amphenol RF www.amphenolrf.com DRAWING NO. 18750 2 OF 2 REV Y ITEM NO. 18750 PART NO. 18750