031-30232-4

NOTES: 1. MATERIALS AND FINISHES: BODY - BRASS, NICKEL PLATING (100 MIN THICK) INSULATORS - PTFE CONTACT - BRASS, GOLD PLATING (30 MIN THICK) CENTER CONTACT - BeCu, GOLD PLATING (50 MIN THICK) HEX NUT - BRASS, NICKEL PLATING (100 MIN THICK) LOCKWASHER - PHOSPHOR BRONZE, NICKEL PLATING (100 MIN THICK) CLAMP - BRASS, SILVER PLATING (200 MIN THICK) CLAMP NUTS - BRASS, SILVER PLATING (200 MIN THICK) REAR CLAMP NUT - BRASS, NICKEL PLATING (100 MIN THICK) BUSHING - BRASS, SILVER PLATING (200 MIN THICK) GASKETS - SILICONE RUBBER 2. ELECTRICAL: STAMP A. IMPEDANCE: NON-CONSTANT (CAN BE USED WITH 50, "AMPHENOL 75 AND 93 OHM TRIAXIAL CABLES) 31-30232-4" B. FREQUENCY RANGE: 0 - 500 MHz C. VOLTAGE: 5000 V PEAK 3. MECHANICAL: A. TEMPERATURE RANGE: -65 $ C TO 165 $ C 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL, PART NO. [SEE TABLE], AND DATE CODE" 5. SHOWS CABLE ENTRY DIMENSIONS REVISIONS THIRD ANGLE PROJ. REV DESCRIPTION W RE-DRAWN IN PRO-E & ADDED COD X 31-30232-4 SCALE 1.000 31-30232-33 SCALE 1.000 5 5 5 5 0.120 5 0.110 9/20/13 CORRECTED FREQUENCY RANGE: 500MHz WAS 50MHz 31-30232-4 1.320 REF. DATE 0.125 5 0.140 0.185 5 0.160 0.140 11-May-18 5 5 ECO APPR 8104 NB 49679 0.185 0.165 POLARITY B CLAMP NUT MASTER LUG TYP. 5/8" HEX NUT 90 $ 7/16 " REF. 2 FLATS CLAMP GASKET GASKET CLAMP NUT REAR CLAMP NUT 31-30232-33 1.320 REF. 5 STAMP "74868 31-30232-33 MIS-20053/72-002" 90 $ BUSHING 5 5 0.070 0.058 5 5 5 0.070 5 0.088 0.125 5 0.088 0.103 5 5 0.125 0.100 0.067 D 120 $ 120 $ INSULATOR 5/8" HEX NUT 120 $ ITEM NO. 31-30232-4 31-30232-33 PART NO. ASSEMBLED LENGTH POLARITY CABLE 31-30232-4 1.437 REF. D MICRO DOT 295-3954 31-30232-33 1.437 REF. B 7/16 " REF. 2 FLATS CLAMP NUT CLAMP NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL REFERENCE EAR 5861 CONFIGURATION LEVEL: In Work FINISH GASKET GASKET CLAMP NUT REAR CLAMP NUT CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY RAYCHEM 5026E5312 UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES BUSHING DRAWN R. BIERASINSKI DATE 12-Aug-13 ENGINEER C. LOSEY DATE 18-Feb-64 APPROVED K. CAPOZZI DATE 11-May-18 CAD FILE TITLE BNC TRIAX S.H. MT. JACK SCALE: 5.0:1.0 DWG SIZE B SHEET Amphenol RF www.amphenolrf.com DRAWING NO. 31-30232-X 3 OF 3 REV X ITEM NO. 31-30232-X PART NO. 31-30232-X