031-5179

NOTES: 31-5179 REVISIONS REV DRAWING NO. 1. MATERIALS AND FINISHES (PLATING THICKNESS IN MICROINCHES): BODIES - BRASS, NICKEL PLATING (100 MIN THICK) COUPLING NUT - BRASS, NICKEL PLATING (100 MIN THICK) CONTACT - BeCu, SILVER PLATING (200 MIN THICK) REAR CONTACT - PHOSPHOR BRONZE, SILVER PLATING (200 MIN THICK) WASHER - BRASS, NICKEL PLATING (100 MIN THICK) OUTER CONTACT - PHOSPHOR BRONZE, NICKEL PLATING (100 MIN THICK) FERRULE - COPPER, NICKEL PLATING (100 MIN THICK) INSULATORS - PTFE GASKET - SILICONE HEAT SHRINK TUBING - CROSSLINKED POLYOLEFIN DESCRIPTION -- THIRD ANGLE PROJ. DATE RELEASE TO MFG. C ------ COD SHEET ADDED 9/20/13 ECO APPR 49679 RAK ------ 2. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $C TO +165 $C 3. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF 31-5179, AND DATE CODE" SCALE 4. CABLE ASSEMBLY INSTRUCTIONS A. TRIM CABLE AS SHOWN. B. SOLDER CABLE CENTER CONDUCTOR TO CONTACT. C. INSERT CABLE WITH PTFE INSULATOR ENTERING CONNECTOR AND BRAID OVER KNURL. D. CRIMP FERRULE WITH AMPHENOL TOOL 227-944 AND DIE SET 227-1221-11 CAVITY A, .213" HEX DIE. 5. SHOWS CABLE ENTRY DIMENSIONS. 1.00 REF. 1.103 REF. 0.50 REF. HEAT SHRINK TUBING 0.453 #0.010 1.500 0.536 REF. FERRULE 0.437 REF. TYP.(2) 0.943 REF REAR CONTACT 0.250 #0.010 0.043 0.204 0.125 #0.010 0.123 0.50 REF RECOMMENDED CABLE STRIPPING DIMENSIONS REVERSE POLARITY BNC INTERFACE UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specificati property of Amphenol Corp. (2) must confidential and not to be disclosed are given by Amphenol Corp. The fur other data by Amphenol Corp., or to not to be regarded by implication or rights or permitting such holder or product, process or design, patented or disclosed by said drawings, speci ons, or other data (1) are, and rema be returned upon request; and (3) ar to any person other than those to w nishing of these drawings, specifica any other person to anyone for any p otherwise in any manner licensing, any other person to manufacture, use or otherwise, that may in any way b fications, or other data. 0.6 REF. in the e hom they tions, or urpose is granting or sell any e related to DRAWN MATERIAL SEE NOTES REFERENCE EAR 122-965500-50 DATE ABHAYA KISHORE 08-Aug-13 ENGINEER DATE O MCPHERSON 17-Jul-07 APPROVED DATE K. CAPOZZI CAD FILE 31-5179 9/20/13 Amphenol RF TITLE BNC RIGHT ANGLE PLUG MIL-CRIMP POLARIZED FOR RG303/U CABLE CODE ID 74868 Danbury, CT, USA Tainan, Taiwan Shenzhen, China www.amphenolrf.com SCALE: 3.0:1 DWG SIZE DRAWING NO. B 31-5179 SHEET 2 OF 2 REV C