031-6874

NOTES: 1. MATERIALS AND FINISHES: BODY,RETAINING RING, LOCK WASHER & HEX NUT - BRASS, NICKLE PLATING INSULATOR - PTFE, NATURAL CONTACT - BeCu, GOLD PLATING INSULATOR DISC - ULTEM, NATURAL GASKET - RUBBER, RED FERRULE - COPPER, NICKEL PLATING 2. ELECTRICAL: A. IMPEDANCE: B. FREQUENCY: C. VSWR: 1.30 D. DIELECTRIC THIRD ANGLE PROJ. 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 31-6874 AND DATE CODE" 50 OHM DC - 8 GHz MAX. WITHSTANDING VOLTAGE: 1000 VRMS, MIN. REV DESCRIPTION A 5. CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN. B. SLIDE FERRULE AND INSULATOR DISC ONTO CABLE. C. SOLDER CABLE CENTER CONDUCTOR TO CONTACT. D. INSERT CABLE WITH FOIL ENTERING CONNECTOR AND BRAID OVER KNURL. E. CRIMP FERRULE OVER BRAID WITH 0.429" HEX DIE. 12,10 [0.476 ] 13,00 [0.512 ] RECOMENDED MOUNTING HOLE DIMENSIONS DATE RELEASE TO MFG. 12,50 [0.492 ] BRAID 5,50 [0.217 ] CENTRE CONDUCTOR 36,73 REF [1.446 ] 20-APR-20 1,50 [0.059 ] DIELECTRIC & FOIL 6. SHOWS CABLE ENTRY DIMENSIONS. 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C REVISIONS 0,20 x45 $ [0.008 ] SCALE ECN 14981 APPR EH 1.200 RECOMENDED CABLE STRIPPING DIMENSIONS 18,00 REF [0.709 ] 11/16" WRENCH 8,00 REF [0.315 ] GASKET 11.80 REF [0.465] 'D' FLAT 12,00 REF [0.472 ] 6 6 7,60 [0.299 ] 3,00 [0.118 ] 6 2,76 [0.109 ] 6 10,90 [0.429 ] INTERFACE PER MIL-STD-348 SERIES: TNC JACK CONTACT 7/16-28UNEF-2A THREAD 1/2-28UNEF-2A THREAD FERRULE 9,30 REF [ 0.366 ] TYP(2) 16.00 MM WRENCH LOCK WASHER INSULATOR DISC 4,20 [0.165 ] MAX. PANEL THICKNESS CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: