031-6877

NOTES: 1. MATERIALS AND FINISHES: BODY,RETAINING RING, LOCK WASHER HEX NUT - BRASS, NICKLE PLATING INSULATOR - PTFE, NATURAL CONTACT - BRASS, GOLD PLATING INSULATOR DISC - ULTEM, NATURAL GASKET - RUBBER, RED FERRULE - COPPER, NICKEL PLATING 2. ELECTRICAL: A. IMPEDANCE: B. FREQUENCY: C. VSWR: 1.30 1.40 D. DIELECTRIC THIRD ANGLE PROJ. 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 31-6877 AND DATE CODE" & 50 OHM DC - 8 GHz MAX. @ DC - 6 GHz MAX. @ 6 - 8 GHz WITHSTANDING VOLTAGE: 1000 VRMS, MIN. REV DESCRIPTION A 5. CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN. B. SLIDE FERRULE AND INSULATOR DISC ONTO CABLE. C. SOLDER CABLE CENTER CONDUCTOR TO CONTACT. D. INSERT CABLE WITH FOIL ENTERING CONNECTOR AND BRAID OVER KNURL. E. CRIMP FERRULE OVER BRAID WITH 0.429" HEX DIE. 12,10 [0.476 ] 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C 36,73 REF [1.446 ] 20-APR-20 ECN 14981 APPR EH 1,50 [0.059 ] DIELECTRIC & FOIL 12,50 [0.492 ] BRAID 5,50 [0.217 ] CENTRE CONDUCTOR RECOMENDED MOUNTING HOLE DIMENSIONS DATE RELEASE TO MFG. 13,00 [0.512 ] 6. SHOWS CABLE ENTRY DIMENSIONS. REVISIONS SCALE 1.300 0,20 x45 $ [0.008 ] RECOMENDED CABLE STRIPPING DIMENSIONS 18,00 REF [0.709 ] 11/16" WRENCH 8,00 REF [0.315 ] GASKET 11.80 REF [0.465] 'D' FLAT 12,00 REF [0.472 ] 6 6 7,60 [0.299 ] 3,00 [0.118 ] 6 2,76 [0.109 ] 6 10,90 [0.429 ] INTERFACE PER RP TNC JACK CONTACT 7/16-28UNEF-2A THREAD LOCK WASHER FERRULE 9,30 REF [ 0.366 ] TYP(2) 1/2-28UNEF-2A THREAD 16.00 MM WRENCH INSULATOR DISC 4,20 [0.165 ] MAX. PANEL THICKNESS CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: