031-70568-12G

NOTES: 1. MATERIALS AND FINISHES: BODY - BRASS, NICKEL PLATING CONTACT PIN - PHOSPHOR BRONZE, GOLD PLATING INSULATORS - PTFE, NATURAL LOCK RING - BRASS, NICKEL PLATING LOCKWASHER - PHOSPHOR BRONZE, NICKEL PLATING HEX NUT - BRASS, NICKEL PLATING FERRULE - BRASS, NICKEL PLATING 2. SHOWS CABLE ENTRY DIMENSIONS 6. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL, 31-70568-12G & DATE CODE" 12,02 0,1 [.473 .004 ] MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C 4. CABLE ASSEMBLY INSTRUCTIONS A. TRIM CABLE AS SHOWN B. SLIDE INSULATOR DISC ONTO CABLE CENTER CONDUCTOR C. CRIMP CONTACT TO CABLE CENTER CONDUCTOR WITH A .068" HEX DIE D. CRIMP FERRULE WITH .324" HEX DIE INTERFACE PER: MIL-STD-348 75 OHM BNC JACK DESCRIPTION A 12,83 0,1 [.505 .004 ] 3. LOCK WASHER REV 5 ELECTRICAL: A. IMPEDANCE: 75 OHM B. FREQUENCY RANGE: DC - 12 GHz C. RETURN LOSS (VSWR): -20 dB (1.2) DC - 6 GHz -15 dB (1.43) 6 - 12 GHz D. DIELECTRIC WITHSTANDING VOLTAGE: 1500 VRMS, MIN. HEX NUT REVISIONS THIRD ANGLE PROJ. DATE RELEASE TO MFG. 29-May-19 ECN 11721 APPR SV 19,82 [.780 ] 12,16 [.479 ] DIELECTRIC & FOIL 4,95 [.195 ] CENTER CONDUCTOR SCALE 1.500 RECOMMENDED CABLE STRIPPING DIMENSIONS RECOMMENDED MOUNTING PANEL DIMENSIONS 1/2-28UNEF-2A THD 5 'D' FLAT 7,5 [.295 ] GASKET 5,9 [.232 ] 2,08 [.082 ] 1,38 5 [.054 ] 5 1,32 [.052 ] 9,5 [.374 ] 5 8,5 [.335 ] 17,45 [.687 ] [11/16"] WRENCH SIZE] HEX CONTACT INSULATOR DISC FERRULE CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: