082-100-RFX

Amphenol® Type N Description Named for Paul Neill of Bell Labs and developed in the 1940’s. The Type N offered the first true microwave performance. Type N connector was developed to satisfy the need for a durable, weatherproof medium size RF connector with consistent performance through 11 GHz. There are two families of Type N connectors: • Standard N (Coaxial Cable) • Helical N (Corrugated Cable) Primary applications are the termination of medium to miniature size coaxial cable: RG-8 and RG-225 Type N RG-58 and RG-141 Specifications 226 Cable Plugs 227 Right Angle Plugs 228 Jacks 229-232 Receptacles, Accessories 234-235 Adapters 236 Features/Benefits Helical N Corrugated Cable Connectors Specifications Plugs Jacks 239 240-241 242-243 Application • • • • • • • Antennas Base Stations Broadcast Cable Assemblies Components Instrumentation Mil-Aero • • • • • Radar Radios Satcom Surge Protection WLAN Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 225 Type N • Accommodates a wide range of medium to miniature sized RG coaxial cables in a rugged medium size design. Provides customer flexibility in their design and manufacturing with a durable connector. • Broad line of Military (M39012 prefix), Industrial (UG prefix), and Commercial Grade (RFX suffix) products available. Gives customer choices in weighing cost versus performance benefits. • Available in many styles: Plugs (Straight and Right Angle) and Jacks (Panel Mount, Bulkhead Mount, Receptacle). Meets many customer application demands. Amphenol® Type N Specifications ELECTRICAL MECHANICAL Impedance 50 ohms Frequency range 0-11 GHz Voltage rating 1,500 volts peak Dielectric withstanding voltage 2,500 volts rms. VSWR (MIL-C-39012 cable connectors) M39012 straight connectors: 1.3 max. 0-11 GHz Cable affixment (center conductor) M39012 right angle: 1.35 max. 0-11 GHz Contact resistance: center contact 1.0 milliohm Other outer contact 0.2 milliohm RF leakage: -90 dB minimum at 3 GHz Mating 5/8-24 threaded coupling Temperature range TFE -65°C to + 165°C Copolymer of Styrene: - 55°C to + 85°C Cable affixment (braid or jacket) All crimps: hex braid crimp. Clamps: screwthread nut and braid clamp Weatherproof All series N with gaskets are weatherproof Hermetic seals Pass helium leak test of 2 X 10-8 cc/sec Crimp: crimp or solder All others: solder only Pressurized Shock Captivated contact All crimps. Others, where specified. Compression seal MIL-Std. 202 method 213 Vibration Cable retention Crimps: 60-120 lbs. Clamps: 30-70 lbs. MIL-Std. 202 method 204 (test cond. B) Moisture resistance MIL-Std. 202 method 106 Corrosion MIL-Std. 202 method 101 (test cond. B) Temperature cycling MIL-Std. 202 method 102 (test cond. C) Altitude MIL-Std. 202 method 105 (test cond. C) MATERIAL Contacts Male: brass; Female: phosphor bronze or beryllium copper. Silver or gold plated Other metal parts Brass: ASTROplate® finish except M39012 silver. Insulators TFE, copolymer of styrene or glass-TFE (hermetic seal) Insertion loss: .15 dB maximum at 10 GHz Insulation resistance: 5000 megohms minimum ENVIRONMENTAL Weatherproof gaskets Silicone rubber or synthetic rubber Crimp ferrule Copper MILITARY SPECIFICATIONS MIL-C-39012 & MIL-A-55339 Where applicable NOTE: These characteristics are typical and may not apply to all connectors. JACK PLUG REF PLANE .412/.398 .362/.356 REF PLANE .060/.016 .207/.187 .230/.210 .210 MIN .625-24UNEF-2A Å.827 MAX Å.330 MAX Å.344/.336 Å.630 MIN Å.627 MAX Å.320/.316 "N" SOCKET (FILE: NSOC.DWG) .168/.158 (FILE: NPIN.DWG) .202/.172 FULL THD. .177 MIN FULL THD. .625-24UNEF-2B "N" PIN .077/.047 .077/.047 SEALING GASKET .210 MIN .422 MIN REF PLANE .140/.110 .003 MIN .066/.063 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 226 Amphenol® Type N Cable Attachment Method Fig. 1 Fig. 2 a■ a c• c• b 82-332 82-340 82-340-1052 82-340-1054 82-4425 b Crimp-Crimp N Plugs 82-4425-1003 82-4426 82-4426-11RFX 82-4427 82-4427-1006 Fig. 3 Clamp N Plugs 82-202 34025 82-202-RFX 34025-RFX 82-3202 82-202-1006 82-312 82-6034 82-5370 82-5375 82-5375-RFX 82-5380-RFX 82-6152 a Fig. 4 a c• c b b Solder-Solder N Plugs 82-5955-RFX 82-5956-RFX 82-6124 Crimp-Crimp N Plugs 82-6142-1000 82-6106 82-5993 82-6010 Cable RG-/U 8, 213 8, 9, 144, 165, 213 8, 9, 144, 165, 213, 214, 216, 225 9, 214 9, 214, 225, 393 55, 142, 223 58, 141 142, 142B, 400 142, 400 213 214, 225, 393 Belden 9913, 9914 B9913, Amph TWB 4001 LMR400, TWB 4001 LMR600, TWB 6001 LMR240, TWB 2401 LMR240, TWB 2401 59, 62 174, 188, 316 LMR 240, TWB2401 402 (.141 S/R) 405 (.086 S/R) 401 (.250 S/R) Ethernet®▼ Cables Times AA4478(FEP), AA4479(PVC); Belden 89880(FEP), 9880(PVC) ● Dimensions, inches (millimeters) a b c● 1.48(37.7)■ .827(21.0) .418(10.6) 1.50(38.1) .827(21.0) .444(11.3) 1.50(38.1) .827(21.0) .444(11.3) 1.50(38.1) .827(21.0) .444(11.2) 1.50(38.1) .827(21.0) .437(11.1) 1.48(37.7)■ .827(21.0) .438(11.1) 1.54(39.1)■ .827(21.0) .438(11.1) 1.37(34.9)■ .827(21.0) .220(5.6) 1.48(37.7)■ .827(21.0) .206(5.2) 1.36(34.6)■ .827(21.0) .210(5.3) 1.38(34.9) .827(21.0) .219(5.4) 1.31(33.2) .827(21.0) .212(6.4) 1.38(35.0)■ .827(21.0) .220(5.6) 1.45(36.9)■ .827(21.0) .220(5.6) 1.45(36.9)■ .827(21.0) .418(10.6) 1.45(36.9)■ .827(21.0) .438(11.1) 1.48(37.7)■ .827(21.0) .418(10.6) 1.50(38.1) .827(21.0) .443(11.2) 1.49(37.8)■ .850(21.6) .418(10.6) 1.98(50.3)■ .930(23.6) .625(15.9) 1.41(35.8)■ .850(21.6) .261(6.6) 1.41(35.8)■ .850(21.6) .261(6.6) 1.36(34.6)■ .827(21.0) .261(6.6) 1.41(35.8)■ .827(21.0) .125(3.2) 1.17(29.8) .827(21.0) .220(5.6) 1.19(30.3) .826(21.0) .141(3.6) 1.19(30.3) .826(21.0) .086(2.2) 1.19(30.3) .826(21.0) .250(6.35) CAI C11 C8 C8 C8 C8 C11 C11 C11 C11 C11 C8 C8 C11 C11 C11 C11 C11 C8 C11 C11 C11 C11 C11 C11 C11 C9 C9 C9 Crimp 1.48(37.7)■ C11 P7 accommodates cable diameter Crimp ■ includes outer ferrule .827(21.0) .437(11.1) ▼ Ethernet = Xerox Trademark Amphenol Corporation Tel: 800-627-7100 Construction Notes Plt. Ins. P33 D1 Lockwire Holes P1 D9 Lockwire Holes P1 D1 Captivated Cont. P1 D1 Lockwire Holes P7 D1 — P34 D1 Lockwire Holes P15 D1 — P15 D1 Lockwire Holes P17 D1 Lockwire Holes P7 D1 — P1 D1 Lockwire Holes P7 D1 — P15 D1 — P34 D1 Lockwire Holes P34 D1 Lockwire Holes P33 D1 Lockwire Holes P15 D1 — P1 D1 — P1 D9 Hex Coupling P34 D9 Hex Coupling P15 D1 Hex Coupling P34 D1 Hex Coupling P7 D1 — P7 D1 — P7 D1 — P7 D1 — P7 D1 — P7 D1 — D1 — Military Number M39012/01B0007 UG-21E/U UG-1185/U UG-21D/U Amphenol Number 82-340 82-3202 82-312 82-202 82-202-RFX M39012/01B0008 82-332 — 82-4425-1003 — 82-5370 — 82-5375 — 82-5375-RFX UG-536B/U 34025 — 34025-RFX — 82-4427-1006 M39012/01-0503 82-4427 M39012/01-0502 82-4426 M39012/01-0501 82-4425 — 82-340-1052 — 82-202-1006 — 82-6142-1000 — 82-5993 — 82-6106 — 82-6010 — 82-5380-RFX — 82-6034 — 82-6152 — 82-5955-RFX — 82-5956-RFX — 82-6124 — Fig. 1 2 2 2 2 1 1 1 1 1 2 2 1 1 1 1 1 2 3 3 3 3 1 3 1 4 4 4 82-4426-11RFX 1 ▲ Distributor stocked www.amphenolrf.com 227 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ Type N 58, 141, 142A, 400 Cable Attachment Outer Inner Crimp Crimp Clamp Solder Clamp Solder Clamp Solder Clamp Solder Crimp Crimp Crimp Crimp Crimp Crimp Crimp Crimp Crimp Crimp Clamp Solder Clamp Solder Crimp Crimp Crimp Crimp Crimp Crimp Crimp Crimp Crimp Crimp Clamp Solder Crimp Crimp Crimp Crimp Crimp Crimp Crimp Preassy Crimp Crimp Crimp Crimp Crimp Crimp Solder Solder Solder Solder Solder Solder Type N N CABLE PLUGS Amphenol® Type N Right Angle Plugs Fig. 1 c• d■ a b Crimp N Angle Plugs 82-4440-1001 82-5995 82-5374 82-4440 Fig. 3 Fig. 2 a d a b d c• b c Crimp N Angle Plug Cubic Body 82-6048-1000 82-5989-1004 82-6157 82-6165 82-6166 Clamp N Angle Plug Cubic Body 18750 82-5988-1000 N RIGHT ANGLE PLUGS Cable RG-/U 9, 214, 225, 393 55, 142, 223 58, 141, 142 Crimp Crimp a Dimensions, inches (millimeters) b c● 1.40(35.5) .827(21.0) .437(11.1) Notes CAI Plt. Ins. Military Number Amphenol Number Fig. 1.95(49.5)■ C11 P28 D1 — 82-4440-1001 1 ■ d Crimp Crimp 1.41(35.7) .827(21.0) .220(5.6) 1.98(50.2) C11 P11 D1 — 82-5374 1 Clamp Solder 1.63(41.3) .827(21.0) .210(5.3) 1.22(31.0) C8 — 18750 2 P1 D1 214, 225, 393 Crimp Crimp 1.40(35.5) .827(21.0) .438(11.1) 1.95(49.5)■ C11 P33 D1 214, 393 Crimp Solder 1.195(30.4) .827(21.0) .438(11.1) 1.62(4.1)■ C11 P33 D9 214, 393 Crimp Solder 1.195(30.4) .850(21.6) .438(11.1) 1.62(4.1)■ C11 P33 D9 LMR 600, TWB 6001 Crimp Solder 1.32(33.5) .850(21.6) .625(15.9) 1.61(40.9)■ C11 P34 D9 Amph TWB 4001, ■ M39012/05-0501 82-4440 — 1 82-5988-1000 2 Hex Coupling 82-5988-1004 3 Hex Coupling 82-5995 1 82-6048-1000 3 Crimp Solder 1.291(32.8) .850(21.6) .298(7.57) 1.594(40.5) C11 P33 D9 LMR 240, 8X Crimp Crimp 1.43(36.5) .827(21.0) .259(6.6) 1.07(27.2) C11 P7 D1 Nickel Body 82-6157 3 LMR 240, 8X Crimp Crimp 1.43(36.5) .827(21.0) .259(6.6) 1.07(27.2) C11 P7 D1 Nickel Body 82-6165 3 LMR 240, 8X Crimp Crimp 1.43(36.5) .827(21.0) .259(6.6) 1.07(27.2) C11 P33 D1 Silver Body 82-6166 3 LMR 400, Belden 9913 ● Cable Attachment Outer Inner accommodates cable diameter ■ includes outer ferrule — ▲ Distributor stocked Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 228 ▲ ▲ Amphenol® Type N Straight Jacks Fig. 2 Fig. 1 Fig. 3 c• a b 82-4429-RFX 82-209-1006 Fig. 4 82-63 Fig.5 36500-RFX Fig. 6 82-6092-RFX 82-5376-RFX Fig. 7 Fig. 6 Fig. 9 Type N 82-6158 82-63-RFX 35025-RFX N STRAIGHT JACKS Cable RG-/U Conn. Cable Attachment Type Outer Inner 8, 9, 87A, 144,165,213, Str. 214,216,225 B9913, Times Str. AA-6146 ● a Dimensions, inches (millimeters) b c● d e Notes CAI Plt. Ins. Military Number Amphenol Number 82-63 3 2 Clamp Solder 1.56(39.7) .750(19.1) .440(11.2) — — C8 P1 D1 UG-23B/U Clamp Solder 1.56(39.6) .750(19.1) .443(11.3) — — C8 P1 D9 — 82-209-1006 Fig ▲ 59, 62 Str. Crimp Crimp 1.44 (36.7) .866 (22) .210 (5.3) .866 (22) .250 (64) — P7 D1 — 82-5376-RFX 5 59 Str. Crimp Crimp 1.44 (36.7) — — — — — P7 D1 — 82-6092-RFX 6 ▲ 58, 141 Str. Clamp Solder 1.90 (35.5) .630 (16) .212 (5.4) — — — P7 D1 — 35025-RFX 7 ▲ 8, 213, 214 Str. Clamp Solder 1.58 (40.2) .750 (19) .437 (11.1) — — — P7 D1 — 82-63-RFX 8 59, 62 Str. Clamp Solder .96 (24.5) .827 (21) .143 (3.6) — — — P7 D1 — 36500-RFX 4 LMR240, 8X Str. Clamp Solder .96 (24.5) .827 (21) .143 (3.6) — — — P7 D1 — 82-6158 9 213 Str. Crimp Crimp 1.44 (36.6) .669 (17) .440 (11.2) — — — P7 D1 — 82-4429-RFX 1 accommodates cable diameter ■ Captivated contact ★ IBM6028495 ▼ max. panel when rear mounted thru panel ▲ Distributor stocked Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 229 Amphenol® Type N Panel Mount - 4 Hole Flange Fig. 2 Fig. 1 .718(18.3) .718(18.3) T T c• .641(16.3) .641(16.3) .125(3.2) dia. 4 holes .125(3.2) dia. 4 holes b square x .080(2.0) thk. c• e max. panel thick e max. panel thick a d a d 36250 82-5372 Fig. 4 Fig. 3 c b d A a 82-6098-RFX 82-6099-RFX 82-6163 82-62 N PANEL JACKS Cable RG-/U Conn. Cable Attachment Type Outer Inner a Dimensions, inches (millimeters) d b c● e Notes Mtg CAI Plt. Ins. Hole Military Number Amphenol Number Fig 1.56(39.7)■ 1.00(25.4) .220(5.6) .576(14.6) .125(3.2)▼ C11 P15 D1 T 82-5372 2 Clamp Solder 1.50(38.1) 1.00(25.4) .224(5.7) .656(16.7) .219(5.6)▼ C8 P1 D1 T UG-1095A/U 36250 1 8, 9, 87A, 144,165,213, Panel 214,216,225 Clamp Solder 1.56(39.7) 1.00(25.4) .440(11.2) — C8 P1 D1 — UG-23B/U 82-62 3 405 (.085) S/R Panel Solder Solder 1.26(32.2) 1.00(25.4) .086(2.2) .736(18.7) — C9 P7 D1 T — 82-6098-RFX 4 402 (.141) S/R Panel Solder Solder 1.26(32.2) 1.00(25.4) .141(3.6) .736(18.7) — C9 P7 D1 T — 82-6099-RFX 4 401 (.250) S/R Panel Solder Solder 1.26(32.2) 1.00(25.4) .250(6.35) .736(18.7) — C9 P7 D1 T — 82-6163 55, 141, 142 Panel Crimp 55, 58, 141, Panel Crimp Amphenol Corporation Tel: 800-627-7100 — — 4 www.amphenolrf.com 230 Type N Bulkhead Amphenol® Fig. 2 Fig. 1 b c• dia. c• e max. panel e max. panel d b a .750(19.1) hex. nut .641(16.3) .531(13.6) across 2 flats U .546(13.9) 82-5373 Fig. 5 Fig. 4 c• dia. e max. panel c• dia. e max. panel b c• dia. e max. panel b a? b a? d a? d .641(16.3) d .641(16.3) U .546(13.9) d U .546(13.9) 35275 Fig. 3 a? .641(16.3) .641(16.3) U .546(13.9) U .546(13.9) 82-5378 82-5933 82-5994 Fig. 7 Fig. 8 Type N Fig. 6 a d c b b c e c Type N e e d d a a 82-6151 82-6156 82-6143-1000 N BULKHEAD JACKS Cable RG-/U 55, 58, 141, 142, 223 Conn. Cable Attachment Type Outer Inner a Bulkh. Clamp Solder 1.67(42.5) .813(20.6) .224(5.7) .910(23.1) .317(8.1) C8 D1 U 55, 142, 223 Bulkh. Crimp Dimensions, inches (millimeters) b c? d e Notes Mtg CAI Plt. Ins. Hole P1 Military Number Amphenol Number UG-556B/U Fig 35275 1 Crimp 1.73(43.9) .872(22.1) .220(5.6) .935(23.7) .250(6.4) C11 P15 D1 U — 82-5373 2 188, 316 Bulkh. Solder Crimp 1.59(40.4) .866(22.0) .178(4.5) .917(23.3) .315(8.0) C11 P15 D9 U — 82-5933 3 58, 141 Bulkh. Crimp Crimp 1.74(44.2) .872(22.1) .206(5.2) .926(23.5) .250(6.4) C11 P34 D1 U — 82-5378 4 LMR 600 Bulkh. Crimp Crimp 2.21(56.1) .933(23.7) .625(15.9) .926(23.5) .250(6.4) C11 P34 D9 U — 82-5994 5 LMR 240, 8X Bulkh. Crimp Crimp 1.41(36.0) .866(22.0) .259(6.6) .866(22.0) .255(6.5) C11 P7 D1 — — 82-6151 6 174, 188, 316 Bulkh. Crimp Crimp 1.53(39.0) .866(22.0) .133(3.4) .866(22.0) .255(6.5) C11 P7 D1 — — 82-6156 7 LMR 400 Bulkh. Crimp Crimp 1.93(49.0) .750(19.0) .420(10.6) .917(23.2) .324(8.22) C11 P34 D9 U — 82-6143-1000 8 Amphenol Corporation Tel: 800-627-7100 231 www.amphenolrf.com Amphenol® Type N Bulkhead Fig. 1 Fig. 2 c b b c e e d a d a 82-6096-RFX 82-6097-RFX 82-6162 82-346-RFX Fig. 4 Fig. 3 Fig. 5 .641(16.3) U .546(13.9) a b .527(13.4) across two flats b c c e .750(19.1) hex nut e d b d a d a 82-5378-RFX 82-6093-RFX e max. panel 82-369 N BULKHEAD JACKS Cable RG-/U Cable Attachment Outer Inner a Dimensions, inches (millimeters) b c● d Notes Mtg CAI Plt. Ins. Hole e Military Number Amphenol Number Fig 405 (.085) S/R Solder Solder 1.26(32.2)■ .866(22.0) .086(2.2) .866(22.0) .255(6.5) C9 P7 D1 — — 82-6096-RFX 1 402 (.141) S/R Solder Solder 1.26(32.2)■ .866(22.0) .141(3.6) .866(22.0) .255(6.5) C9 P7 D1 — — 82-6097-RFX 1 401 (.250) S/R Solder Solder 1.26(32.2)■ .866(22.0) .250(6.3) .866(22.0) .255(6.5) C9 P7 D1 — — 82-6162 1 8, 213 Crimp Crimp 1.41(36.0)■ .866(22.0) .165(4.2) .866(22.0) .255(6.5) C11 P7 D1 — — 82-346-RFX 2 174, 188, 316 Crimp Crimp 1.40(35.8)■ .866(22.0) .126(3.2) .866(22.0) .255(6.5) C11 P7 D1 — — 82-6093-RFX 3 58, 141 Crimp Crimp 1.40(35.8)■ .866(22.0) .210(5.3) .866(22.0) .255(6.5) C11 P7 D1 — — 82-5378-RFX 4 N PANEL, ANGLE PANEL & BULKHEAD RECEPTACLES Description Bulkhead Receptacle (Jack) Front Mount, Hermetically Sealed Terminal Type Solder Cup Dimensions, inches (millimeters) a b d e 1.58(40.1) .813(20.6) .707(18.0) .209(5.3) Amphenol Corporation Tel: 800-627-7100 Plt. Ins. P34 D11 Mtg Hole Military Number Amphenol Number Fig. U M39012/04-0001 82-369 5 www.amphenolrf.com 232 Amphenol® Type N Panel Mount Receptacle / Solder Terminal Fig. 1 Fig. 2 .718(18.3) .641(16.3) b square x .080(2.0) thk. Fig. 3 .718(18.3) T T .641(16.3) .125(3.2) dia. 4 holes .125(3.2) dia. 4 holes b square x .080(2.0) thk. d d b a e max. panel a d a N Panel Receptacle Jack Mating Face 82-97 82-97-RFX 82-368 N Panel Receptacle Plug Mating Face 49000-RFX 49000-SRFX Fig. 4 N Panel Receptacle Plug Mating Face 82-6100-RFX Note: Slot width is .9mm (alternate sizes available) Fig. 5 Type N d d a a N Panel Receptacle Jack Mating Face Exposed TFE 82-6095-RFX N Panel Receptacle Jack Mating Face 82-6101-RFX Note: Slot width is .9mm (alternate sizes available) Type N N PANEL, ANGLE PANEL & BULKHEAD RECEPTACLES Description Terminal Type Dimensions, inches (millimeters) a b d e Plt. Ins. Mtg Hole Military Number 82-97 2 ▲ 82-97-RFX 2 ▲ Panel Receptacle (Jack) 4-hole Square Flange, Front or Rear Mount Solder Cup 1.11(28.2) 1.00(25.4) .656(16.7) .187(4.7)▼ P1 D1 T Solder Cup 1.13(28.7) 1.00(25.4) .656(16.7) .187(4.7)▼ P7 D1 T Solder Cup 1.11(28.2) 1.00(25.4) .656(16.7) .187(4.7)▼ P34 D1 T Panel Receptacle (Plug) 4-hole Square Flange, Front Mount Only Solder Cup 1.09(27.8) 1.00(25.4) .745(18.9) — P7 D6 T — 49000-RFX Panel Receptacle (Plug) 4-hole Square Flange, Front Mount Only Solder Cup 1.09(27.8) 1.00(25.4) .745(18.9) — P33 D6 T — 49000-SRFX 1 Panel Receptacle (Plug) 4-hole Square Flange, Front Mount Only Slotted Post .874(22.2) .826(21.0) P7 D1 — — 82-6100-RFX 3 Panel Receptacle (Jack) 4-hole Square Flange, Slot Terminal Slotted Post .818(20.8) — .736(18.7) — P7 D1 — — 82-6101-RFX 4 Panel Receptacle (Jack) 4-hole Square Flange, Exposed TFE Exposed TFE 116(29.7) — .736(18.7) — P7 D1 — — 82-6095-RFX 5 .791(20.1) Amphenol Corporation Tel: 800-627-7100 — UG-58A/U Amphenol Number Fig. — M39012/04-0002 82-368 2 1 www.amphenolrf.com 233 Amphenol® Type N Adapters, Straight Fig. 1 Fig. 2 Plug to Plug Adapter 82-100 Plug to Plug Adapter 82-100-RFX Fig. 4 Fig. 3 a a b b N Straight Adapter, Jack-Jack 82-101 Jack to Jack Adapter 82-101-RFX N ADAPTERS Adapter Ends Description a Dimensions, inches (millimeters) b d e Mtg Hole Construction Notes Plt. Ins. Other Military Number Amphenol Number Fig. Plug-Plug Straight 1.59(40.5) .813(20.6) — — — P4 D1 — UG-57B/U 82-100 1 Plug-Plug Straight 1.59(40.5) .813(20.6) — — — P7 D1 — UG-57B/U 82-100-RFX 2 Jack-Jack Straight 1.78(45.2) .656(16.7) — — — P1 D1 — UG-29B/U 82-101 3 Jack-Jack Straight 1.50(38.1) .620(15.8) — — — P1 D1 — UG-29B/U 82-101-RFX 4 ▲ Distributor stocked Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 234 Amphenol® Type N Adapters, Bulkhead/Angle & Tee Fig. 1 Fig. 2 .641(16.3) U .546(13.9) b a e max. panel e d d b a Jack to Jack Bulkhead Adapter 82-66 Jack to Jack Bulkhead Adapter 82-66-RFX Fig. 3 Fig. 4 d d a a b b N Angle Adapter, Plug-Jack 82-213 82-64-RFX N Angle Adapters, Plug-Jack 82-64 Fig. 5 Fig. 6 a a d b d b Type N N Tee Adapter Jack-Jack-Jack 82-99 N Tee Adapter Jack-Plug-Jack 82-102 N ADAPTERS Adapter Ends Description a Dimensions, inches (millimeters) b d e Mtg Hole Construction Notes Plt. Ins. Other Military Number Amphenol Number Fig. Jack-Jack Bulkhead 1.63(41.3) .813(20.6) .708(18.0) .312(7.9) U P1 D6 Pressurized UG-30/U 82-66 1 ▲ Jack-Jack Bulkhead 1.50(38.1) .866(22.0) .866(22.0) .256(6.5) U P1 D6 Pressurized UG-30/U 82-66-RFX 2 ▲ Jack-Plug Angle 1.44(36.5) .813(20.6) 1.37(34.9) — — P1 D1 Mitre Body UG-27A/U 82-64 3 ▲ Jack-Plug Angle 1.44(36.5) .813(20.6) 1.28(32.5) — — P7 D1 Cubic Body 82-64-RFX 4 Plug-Jack Angle 1.31(33.3) .813(20.6) 1.40(35.7) — P1 D1 Cubic Body 82-213 4 Jack-Plug-Jack Tee 1.75(44.5) .813(20.6) 1.48(37.6) — — P5 D1 — UG-107B/U 82-102 5 Jack-Jack-Jack Tee 1.75(44.5) .656(16.7) 1.22(31.0) — — P5 D1 — UG-28A/U 6 — — UG-27C/U 82-99 ▲ Distributor stocked Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 235 ▲ Amphenol® Type N Caps Fig. 1 Fig. 2 Fig. 3 a b a b b a N Terminator Jack 82-5721-10RFX N Male Cap / Resistor Terminated 82-5722-RFX N Female Cap / Resistor Terminated 82-5721-1000 N CAPS Description Dimensions, inches (millimeters) a b Plt. Ins. Military Number Amphenol Number Fig. Male Cap Resistor Terminated, 50Ω 5%, 1 Watt 1.30(33.0) .827(21.0) P7 D1 — 82-5722-RFX 2 Female Cap Terminator, 49.9Ω 1%, 1 Watt 1.30(33.0) .656(15.7) P17 D1 — 82-5721-1000 3 Female Cap Terminator, 50.0Ω 5%, 1 Watt 1.30(33.0) .656(15.7) P17 D1 — 82-5721-10RFX 1 ▼ max. panel when rear mounted thru panel ▲ Distributor stocked Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 236 Type N Corrugated Cable Connectors Amphenol® Description Intermodulation Distortion (IMD) is of increasing concern to many Wireless Infrastructure OEMs due to the need for higher power applications and increased receiver sensitivity performance. Having the ability to measure IMD in-house gives Amphenol the unique ability to understand the affects of our connector designs on IMD generation and enabling Amphenol to design the highest performance IMD connectors in the industry. Our new series of Low Intermodulation N connectors is a result of our efforts in connector design optimization. Annular Type N Features/Benefits Specifications Plugs and Jacks • Typical IMD -125 dBm 239 240-243 • All components silver plated • 360˚ outer contacts • Gold plated inner contacts • EZ HEZTM coupling nut for ease of installation Type N • Available for 1/4", 3/8" and 1/2" superflexible corrugated cables, and 1/2", 7/8", 1 1/4", 1 5/8", standard flexible corrugated cables • Consult your Amphenol sales representative for details Applications • Cellular • PCS • Microwave Radio • Paging Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 237 Amphenol® Type N Corrugated Cable Connectors RF coaxial connectors are the most important element in your cable system. Corrugated copper coaxial cables have the potential to deliver all the performance your system requires, but they are often limited by the performance of the connectors. TXL coaxial connectors have been d e s i g n e d f ro m t h e g ro u n d u p t o deliver optimum performance, while retaining ease of installation. Intermodulation distortion, a major concern in today’s communications systems, is consistently low with TXL connectors. Typical performance is -125 dBm (-168 dBc). In-house IMD measurement capability gives Amphenol the unique ability to understand the effects of connector design elements on IMD generation and to design the best performing connectors in the industry. Two-Piece Design Self-flaring designs are easily attached with standard hand tools in the field, and are highly resistant to pull off and twist off. All TXL coaxial connectors are optimally matched to their cables for low VSWR and insertion loss. Pre-assembled O-Rings O-rings are pre-assembled to the back nuts, eliminating installation problems and lost parts. All TXL connectors feature a simple two-piece design for easier attachment, and all connectors for a given size share a common back nut and trimming dimensions. Easy-Hex Coupling Nut Unique coupling nut design allows tightening by hand or with a standard wrench. One-Piece Body Many TXL connectors feature one-piece bodies. The outer conductor contact and connector body are a single piece to minimize IMD generation. Plated Surfaces Center contacts are gold or silver plated. Bodies are white bronze plated for excellent IMD performance, and are corrosion resistant for a long, trouble-free life. Captive Center Pins Captive center pins simplify installation and eliminate performance variations due to soldering errors and incorrect pin depths. 360o Contact Continuous 360o outer conductor contact is proven to minimize IMD generation compared to spring finger contacts. Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 238 Amphenol® Type N - Corrugated Specifications ELECTRICAL MECHANICAL MATERIAL Impedance 50 ohms Mating MIL-Std. 348 Body Brass, silver plated Frequency range 11.0 GHz Solder or captivated Contacts Return Loss (Freq. GHz) 33 dB (1-2 GHz) 28 dB (2-3 GHz) Inner attachment method max. 707 vrms Outer attachment method Compression Operating voltage Outer: Brass, silver plated Inner: BeCu, gold plated Dielectric withstanding voltage 2,000 vdc Assembly torque 18/22 lb-ft (25/30 N-m) Other metal parts Brass; silver plated Insulators TFE Other Peak power: max 10kW Coupling torque 15.00 lb-in (1.70 N-m) Gaskets Silicone rubber Avg. power: max .60kW Coupling nut retention force 100.00 lbs (444.80 N) Connector durability 500 cycles, 12 cycles/min Insulation resistance: min 5,000 MOhms ENVIRONMENTAL Temperature range Shielding effectiveness: min. 125 dB Operating: -40°C to +150°C Storage: -70°C to +100°C Thermal Shock 3rd order IM product, typical -125 dBm (-168 dBc) MIL-Std. 202 method 107 (test cond. A-1) Immersion IEC 529, IP68 Vibration MIL-Std. 202 method 204 (test cond. B) Corrosion MIL-Std. 202 method 101 (test cond. B) Mechanical Shock MIL-Std. 202 method 213 (test cond. I) Insertion loss: .05 freq GHz * These characteristics are typical and may not apply to all connectors. Type N Type N S 1 W N M PM Corrugated Cable Cable Diameter Plating Interface Gender Options W=While Bronze P=Plated Body (none)=Unplated N=Type N S=Superflex (helical) A=Annular 1=1/4” 2=3/8” 4=1/2” 5=7/8” 6=1-1/4” 7=1-5/8” Amphenol Corporation Tel: 800-627-7100 M=Male (plug) F=Female (jack) R=Right Angle Male (plug) PM=Panel Mount PM-SO=Panel MountSlotted Outer U=Universal www.amphenolrf.com 239 Amphenol® Type N - Corrugated Plugs a b Refer to chart below N PLUG INTERFACE — STRAIGHT Inner Cable Attachment a b Body Contact Amphenol Number 1/4" Helical Solderless 1.97 .74 White Bronze Gold S1WNM 1/4" Helical Solder 1.97 .74 Silver Gold S1PNM-S S2WNM 3/8" Helical Solderless 2.437 .875 White Bronze Gold 3/8" Helical Solder 2.437 .875 Silver Gold S2PNM-S 3/8" Helical Solderless 2.437 .875 Silver Gold S2WNM-SO 1/2" Helical Solderless 2.46 .950 White Bronze Gold S4WNM-U 1/2" Helical Solder 2.46 .950 White Bronze Gold S4WNM-SU 1/2" Helical Solder 2.46 .950 Unplated Silver S4NM-S 1/2" Annular Solderless 2.81 1.025 Silver Gold A4PNM 1/2" Annular Solder 2.81 1.03 Silver Gold A4PNM-S 1/2" Annular Solder 2.81 1.03 Unplated Silver A4NM-S 1/2" Annular Solderless 2.81 1.025 Unplated Silver A4NM 7/8" Annular Solderless 2.99 1.62 Silver Silver A5PNM 7/8" Annular Solderless 2.99 1.62 Unplated Silver A5NM Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 240 Amphenol® Type N - Corrugated Plugs a b c Refer to Chart Below Cable Inner Attachment a b c Body Contact Amphenol Number 1/4" Helical Solderless 1.45 1.94 .76 White Bronze Gold S1PNR 3/8" Helical Solderless 1.679 2.30 .875 White Bronze Gold S2PNR-SO 1/2" Helical Solder 1.74 1.91 .94 White Bronze Gold S4PNR-S 1/2" Helical Solderless 1.74 2.26 .94 White Bronze Gold S4PNR 1/2" Annular Solderless 1.80 2.53 1.00 White Bronze Gold A4PNR Type N N PLUG INTERFACE — RIGHT ANGLE Type N Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 241 Amphenol® Type N - Corrugated Jacks a b Refer to Chart Below N JACK INTERFACE — STRAIGHT Cable Inner Attachment a b Body Contact Amphenol Number 1/4" Helical Solderless 1.87 .74 White Bronze Gold 1/2" Helical Solderless 2.36 .95 White Bronze Gold S1WNF S4WNF-U 1/2" Helical Solder 2.36 .95 Silver Gold S4PNF-S 1/2" Helical Solder 2.36 .95 Unplated Silver S4NF-S 1/2" Annular Solderless 2.56 1.03 White Bronze Gold A4WNF 1/2" Annular Solder 2.56 1.03 Silver Gold A4PNF-S 1/2" Annular Solder 2.56 1.03 Unplated Silver A4NF-S 1/2" Annular Solderless 2.56 1.03 Unplated Silver A4NF 7/8" Annular Solderless 2.64 1.62 Unplated Silver A5NF 7/8" Annular Solderless 2.64 1.62 White Bronze Gold A5WNF 1 1/4" Annular Solderless 3.81 1.87 White Bronze Gold A6WNF A6PNF-H 1 1/4" Annular Solderless 3.81 1.87 Silver Gold 1 1/4" Annular Solderless 3.81 1.87 Unplated Silver A6NF 1 1/4" Annular Solderless 3.81 1.87 Unplated Silver A6NF-H 1 5/8" Annular Solderless 4.26 2.36 White Bronze Gold A7WNF 1 5/8" Annular Solderless 4.26 2.36 Unplated Silver A7NF-1 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 242 Amphenol® Helical N - Corrugated Jack Bulkhead Mount a c b S2PNF-BH Cable Inner Attachment a b c Body Contact Amphenol Number 3/8" Helical Solderless 2.42 .88 .94 Silver Gold S2PNF-BH Type N N JACK BULKHEAD MOUNT Type N Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 243