082-6099-RFX

Amphenol® Assembly Instructions-C9 Type N RIGHT ANGLE JACKS FOR SEMI-RIGID CABLE Amphenol Number A .138 (3.5) 82-6097-RFX .138 (3.5) 82-6162 .138 (3.5) 82-6098-RFX .138 (3.5) 82-6099-RFX .138 (3.5) 82-6163-RFX .138 (3.5) 82-5955-RFX .098 (2.5) 82-5956-RFX .138 (3.5) 82-6124 .157 (4.0) Assembly 82-6096-RFX Step 1 Step 1 All parts of the connector are shown. Step 2 Step 2 Strip the inner conductor, dielectric, and jacket as per “RECOMMENDED CABLE STRIPPING DIM’S” in catalog. A Step 3 Step 3 Slide the INSULATOR onto inner conductor against the jacket. Then insert inner conductor into the CONTACT PIN and solder it as shown. Step 4 Step 4 Slide the SOLDER NUT onto cable. Step 5 Insert cable and parts into the MAIN BODY, then screw the SOLDER NUT until it is tight and solder it as shown. Step 5 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 281