082-61

5 D 3 4 2 NOTES: 1. MATERIALS AND FINISHES: BODY - BRASS, NICKEL PLATING CONTACT - BRASS, SILVER PLATING INSULATOR - PTFE 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. DIELECTRIC WITHSTANDING VOLTAGE: 3000 VRMS, MIN. 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOLRF, 82-61, AND DATE CODE" 5. ASTERISK (*) SHOWS CABLE ENTRY DIMENSIONS. REV 1 REVISIONS DESCRIPTION A AC AD DATE RELEASE TO MFG REDRAWN IN PRO-E , ADDED COD CORRECTED PLATING NOTE 1 10/05/1949 01/14/2013 11/17/2022 ECN 2140 48616 16475 BY -KR ED D 3 WIRE SAFETY HOLES * .623 FLAT 5/8 WRENCH FLATS n0.443 0.364 * .687 FLAT 11/16 WRENCH FLATS n0.098 .625-24UNEF-2B THREAD C C B B CLAMP NUT GASKET BRAID CLAMP CONTACT STAMP '74868 UG-21 B/U' .827 MAX OVER KNURL 1.500 APPROX CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY A MATERIAL NOTICE: These drawings, specifications, or other data (1) are, and remain property the of Amphenol corp. UNLESS OTHERWISE SPECIFIED (2) must be returned upon request; and (3)confidential are and not to be disclosed to any person otherDIMENSIONS ARE METRIC [INCHES] AND TOLERANCES ARE: than those towhom they are given by Amphenol Corp. The furnishing of these drawings, specifications, 6.00 30mm = # 0.2mm [>0.236 - 1.181 = # 0.008] or any other person to manufacture, usesell or any product, process or design, patented or otherwise, that may in any way be related to disclosed or by said drawings, specifications, or other data. >30.00 - 120mm = # 0.3mm [>1.181 - 4.725 = # 0.012] THIRD ANGLE PROJ. 5 REFERENCE --------------------------------------------------------ENGR.1 ANGLES = # 1 $ E. DIAZ EAR# EAR # 4 3 TITLE PLUG TYPE 'N' UG-21 B/U ENGR.2 KARTHIK R DATE 11/14/2022 SHEET NO. 2 OF 2 2 SCALE: 3.5:1.0 SIZE B Amphenol RF DRAWING NO. ITEM NO. PART NO. 82-61 82-61 82-61 1 A REV AD