082-816-1000

NOTES: 1. MATERIALS AND FINISHES: BODY, CLAMP NUTS, WASHER, CONTACT & COUPLING NUT - BRASS, SILVER PLATING RETAINING RING - PHOSPHOR BRONZE GASKET - SILICONE RUBBER, BLACK GASKET - SYNTHETIC RUBBER, BLACK INSULATOR - CROSS-LINKED COPOLYMER OF STYRENE, NATURAL 2. ELECTRICAL: A. IMPEDANCE: 50 OHM 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C 4. 5. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 82-816-1000 AND DATE CODE" REV RECOMMENDED CLAMP NUT TORQUE: 35-40 IN-LBS. 7. SHOWS CABLE ENTRY DIMENSIONS. DESCRIPTION -- RELEASE TO MFG. H RECOMMENDED CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN. B. SOLDER CABLE CENTER CONDUCTOR TO CONTACT. C. CENTER CONDUCTOR TO BE BENT DOUBLE PRIOR TO SOLDERING CONTACT. D. SLIDE CLAMP NUT, GASKET, WASHER & CLAMP NUT OVER THE CABLE. E. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH 6. REVISIONS THIRD ANGLE PROJ. ECN APPR 25-Oct-16 2241 VK -- INSULATOR MATERIAL PTFE WAS ERROR J DATE GASKETS COLOR BLACK WAS RED -- 07-Mar-19 10784 -VR SPANNER. 21,34 [0.840 ] 15,75 [ 0.620 ] BRAID 22,86 MAX. [0.900 ] SCALE 1.400 RECOMMENDED CABLE STRIPPING DIMENSIONS 3/8" ACROSS FLATS 7 12,24 REF [0.482 ] 7 7 INTERFACE PER HN PLUG 5,59 [0.220 ] 7 7 5,84 [0.230 ] 6,55 [0.258 ] 6,48 [0.255 ] 1,52 [0.060 ] CONTACT CLAMP NUT GASKET WASHER 3/8-32UNEF-2A THREAD [0.040] SAFEFTY WIRE HOLES 120 $ APART TYP(3) 3/8-32UNEF-2B THREAD CLAMP NUT 3/8" HEX 41,40 REF [1.630 ] CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: