082-835

NOTES: 1. 2. 3. MATERIALS AND FINISHES: BODIES,OUTER CONTACT, CLAMP NUT, BRAID CLAMP, WASHER & COUPLING NUT - BRASS, NICKEL PLATING BULLET CONTACT - BRASS,SILVER PLATING CONTACT - BeCu, SILVER PLATING WASHER -COPPER, NICKEL PLATING INSULATORS - PTFE, NATURAL GASKETS - SILICONE RUBBER, RED RETAINING RING - PHOSPHOR BRONZE, NATURAL ELECTRICAL: A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC - 11 GHz REVISIONS THIRD ANGLE PROJ. 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 82-835, AND DATE CODE" REV -- DESCRIPTION DATE ECO APPR REDRAWN IN PRO-E & COD SHEET ADDED 23-May-17 03863 MB RELEASE TO MFG. V -- -- -- 5. CABLE ASSEMBLY INSTRUCTIONS: A. STRIP CABLE AS SHOWN. B. SLIDE CLAMP NUT,WASHERS,GASKET & BRAID CLAMP OVER CABLE SHEATH. C. COMB OUT THE BRAID AND FOLD OUT,TRIM EXCESS BRAID. D. SOLDER CABLE CENTER CONDUCTOR TO CENTER CONTACT. E. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH PROPER SPANNER. MAKE ENSURE INTERFACE DIMENSIONS TO MEET. 6. SHOWS CABLE ENTRY DIMENSIONS. SCALE MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65° C TO +165° C BRAID CLAMP GASKET WASHER 0.750 CLAMP NUT 6 BULLET CONTACT 0.097 6 0.443 0.578 REF 1.469 REF 0.364 0.437 6 6 5/8" ACROSS FLATS 0.440 6 5/8" ACROSS FLATS 0.281 0.813 0.156 CENTER CONDUCTOR REF STAMP "AMPHENOL 82-835" INTERFACE PER N PLUG RECOMMENDED CABLE STRIPPING DIMENSIONS WIRE HOLES TYP(3) CUSTOMER OUTLINE DRAWING 1.921 REF UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. 11/16-24UNEF-1A THREAD ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY MATERIAL SEE NOTES REFERENCE EAR # CONFIGURATION LEVEL: In Work FINISH DRAWN MOHAN DATE 04-Mar-14 ENGINEER K.CAPOZZI DATE 04-Mar-14 APPROVED K.CAPOZZI DATE 23-May-17 CAD FILE TITLE TYPE N RIGHT ANGLE PLUG FOR RG-8/U,9/U,213/U, 214/U & 225/U CABLE SCALE: 3.5:1.0 DWG SIZE B SHEET 2 OF 2 REV V Amphenol RF www.amphenolrf.com DRAWING NO. 82-835 ITEM NO. 82-835 PART NO. 82-835