095-725-117-024

NOTES: REVISIONS THIRD ANGLE PROJ. REV 1. MATERIALS AND FINISHES: SMP R/A PLUG - BeCu, GOLD PLATING CABLE - 0.085" CONFORMABLE 2. ELECTRICAL: A. IMPEDANCE: DESCRIPTION A DATE RELEASE TO MFG. ECO -- -- APPR VR PRELIMINARY ISSUE 50 OHM 3. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 95-725-117-XXX AND DATE CODE". SCALE 0.600 LENGTH "L" (SEE TABLE) HEAT SHRINK TUBE MARKING: AMPHENOL RF INTERFACE PER MIL-STD-348 SERIES: SMP PLUG TYP(2) PART NUMBER (IMPERIAL) - 95-725-117 M015 95-725-117 -007 - X HI-POT: 500 VRMS UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. 8.00 [0.203] 9.00 [0.229] 9.84 [0.250] 11.81 [0.300] 11.00 [0.279] - - 95-725-117 M100 - 95-725-117 M400 - 95-725-117 M200 TOLERANCE TABLE LENGTH IN INCHES/FT [METERS] 12.00 [0.305] - 95-725-117 M075 MATERIAL 7.87 [0.200] 95-725-117 M030 - - OTHER 7.00 [0.178] 10.00 [0.254] 95-725-117 M050 95-725-117 -036 6.00 [0.152] - - 95-725-117 -024 5.91 [0.150] - - 95-725-117 -018 5.00 [0.127] - 95-725-117-011 95-725-117 -012 4.00 [0.102] 95-725-117 M020 95-725-117 M025 - 3.94 [0.100] - - 95-725-117 -010 1.97 [0.050] - - 95-725-117 -009 INS. LOSS: ____ dB MAX. 3.00 [0.076] 95-725-117 -005 95-725-117 -008 VSWR: ____ MAX. - 95-725-117 M010 - X CONTINUITY LENGTH AND TOLERANCE "L" IN INCHES [METERS] - 95-725-117 -006 X FREQUENCY: DC - 20 GHz LENGTH TABLE 95-725-117 M005 95-725-117 -004 LOCATE APPROXIMATELY AT CENTER AS SHOWN PART NUMBER (METRIC) - 95-725-117-003 DESIGN REQUIREMENTS: 0.750 0.050 [19,05 1,27 ] 18.00 [0.457] 0" - 23.90" [0 - 0.607] # 0.25" [0.006] 24.00 [0.610] 5.0' - 24.9' [1.524 - 7.617] # 2.5% 19.69 [0.500] 24.00" - 59.00" [0.610 - 1.499] 29.53 [0.750] 25.0' & UP [7.620 36.00 [0.914] 78.74 [2.000] # 5.0% CUSTOMER OUTLINE DRAWING 157.48 [4.000] ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY DATE 14-Jan-19 ENGINEER VIJAY N M DATE 14-Jan-19 REFERENCE EAR # 8856 APPROVED DATE CONFIGURATION LEVEL: In Work CAD FILE FINISH & UP] # 0.50" [0.013] 39.37 [1.000] DRAWN VIJAY N M SEE NOTES TOLERANCE TITLE SMP RA PLUG TO SMP RA PLUG USING www.amphenolrf.com 0.085" CONFORMABLE CABLE VARIOUS LENGTH DRAWING NO. 95-725-117-XXX Amphenol RF SCALE: 2.5:1.0 DWG SIZE B SHEET 2 OF 2 REV A ITEM NO. 95-725-117-XXX PART NO. 95-725-117-XXX