095-902-507-018

NOTES: REVISIONS THIRD ANGLE PROJ. REV 1. MATERIALS AND FINISHES: SMA STR BHD JACK IP 67 - BRASS, NICKEL PLATING SMA R/A PLUG IP 67 - BRASS, NICKEL PLATING CABLE - LMR 200 DESCRIPTION A DATE RELEASE TO MFG. ECO 17-Oct-19 13304 APPR AAP 0.256 [6.50] 2. ELECTRICAL: A. IMPEDANCE: 50 OHM SCALE 3. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 95-902-507-XXX AND DATE CODE" 0.300 0.236 [6.00] RECOMMENDED MOUNTING HOLE DIMENSIONS GASKET LENGTH 'L' (SEE TABLE) LOCK WASHER 0.449 REF [11,40 ] 8.00 MM WRENCH BLACK ADHESIVE LINED HEAT SHRINK TUBE TYP(4) 11.00 MM WRENCH 2.000 0.100 [ 50,80 2,54 ] TYP(2) 0.230 [5.85] 'D' FLAT 7.00 MM WRENCH INTERFACE PER MIL-STD-348 SERIES: SMA JACK PART NUMBER (IMPERIAL) 95-902-507-006 - 95-902-507-012 DC - 8 GHz VSWR:____ : 1 MAX. INS. LOSS: ____ dB MAX. 19.69 [0.500] - 95-902-507M075 - 95-902-507M100 - 95-902-507M200 - OTHER UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. 9.84 [0.250] 95-902-507M050 95-902-507-048 X HI-POT: 750 VRMS 95-902-507M025 - - 95-902-507M400 INTERFACE PER MIL-STD-348 SERIES: SMA PLUG 6.00 [0.152] - 95-902-507-036 X CONTINUITY - LENGTH 'L' IN INCHES [METERS] 12.00 [0.305] 95-902-507-024 X FREQUENCY: PART NUMBER (METRIC) 8.00 MM WRENCH - 95-902-507-018 DESIGN REQUIREMENTS: LENGTH TABLE 18.00 [0.457] TOLERANCE TABLE LENGTH IN INCHES/FT [METERS] 24.00 [0.610] TOLERANCE 29.53 [0.750] 0" - 23.90" [0 - 0.607] # 0.25" [0.006] 39.37 [1.000] 5.0' - 24.9' [1.524 - 7.617] # 2.5% 36.00 [0.914] 24.00" - 59.00" [0.610 - 1.499] 48.00 [1.219] 25.0' & UP [7.620 78.74 [2.000] 157.48 [4.000] & UP] # 0.50" [0.013] # 5.0% CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY MATERIAL SEE NOTES REFERENCE EAR # 8898 CONFIGURATION LEVEL: In Work FINISH DRAWN A ARUN PRABU DATE 11-Feb-19 ENGINEER A ARUN PRABU DATE 11-Feb-19 APPROVED K.CAPOZZI DATE 17-Oct-19 CAD FILE TITLE SMA STR BHD JACK IP 67 TO SMA RA PLUG IP 67 www.amphenolrf.com USING LMR 200 CABLE VARIOUS LENGTH DRAWING NO. 95-902-507-XXX Amphenol RF SCALE: 1.0:1.0 DWG SIZE B SHEET 2 OF 2 REV A ITEM NO. 95-902-507-XXX PART NO. 95-902-507-XXX