10-638976-000

Amphe-PD™ High-powered applications are constantly in need of a solution that is higher in power, smaller in size, and low in cost. The Amphe-PD™ is that ideal solution. The new low insertion force, locking, two-pole connector is UL listed at 69A and CSA listed at 55A. It is also TUV Finger Proof with a V0 fire rating. By combining parallel circuits into one, heat generation is reduced, space is saved, and very importantly, reliability is increased. • Low cost, 100% molded housings • Meets RoHS and UL94V-0 guidelines • Integrated latching mechanism • Easy, tool-less assembly • Molded from UL94V-0 thermoplastic (self extinguishing) • 2-Pole DC Power interconnect in about 1 square inch • Tactile and audible locking • Proven metal clip contact retention on receptacles • TPA device on plug to insure socket locking Part numbers: 10-638975-000 Busbar Receptacle • Swage pins for .093 thick Cu layered busbar • TUV finger proof pins • Housings without bosses • The swage geometry may be adjusted for different thickness busbars. • Housing designed to be captured within the busbar layers. 10-638976-000 Crimp Pin Receptacle • AWG crimp, TUV finger proof • Housing with screw bosses • The crimp may be made with a Pico or Daniel's crimp tool (For reference only: Daniels Crimp tool WA23 with a WA23-3 die) 10-638977-000 PCB Tail Receptacle • PCB Tail, TUV Finger Proof Pins • Housing with screw bosses • The 10-638977-000 is sold fully assembled • to be soldered to a PCB. 10-638974-000 3.6mm RADSOK® Plug • 3.6 mm RADSOK® Plug Connector • TUV finger proof • 6 AWG wire crimp wells • The Plug is designed to accept SuperFlex 6 AWG wire to keep T-Rise to a minimum and • Supports a very tight bend radius. Smaller wire size crimp wells are available. Amphe-PD™ Receptacle and plug Inside cabinet Amphe-PD™ on the back of cabinet