10-729760-000

SHEET 1 OF 1 DOCUMENT NO. B 2 10-729760-000 3 4 REV. REVISIONS DOCUMENT NO. 10-729760-000 REV. 14- .063 .002 [1,6002 0,0508 ] .079 .002 [2,0066 0,0508 ] TYP. CUSTOMER DRAWING DESCRIPTION A INITIAL RELEASE B DESIGN CHANGE DATE 2013-11-7 D 2013-12-06 .079 .002 [2 0,05 ] SHEET 1 OF 1 .450 .002 [11,43 0,0508 ] REV. B .315 [8] .079 .002 [2 0,05 ] .236 [6] .289 .002 [7,34 0,05 ] C C .442 [11,23 ] PCB LAYOUT RECOMMENDATION .580 [14,73 ] SHEET 1 OF 1 B REV. .236 [5,99 ] B .079 [2] .079 [2] DOCUMENT NO. .030 [0,76 ] 10-729760-000 .138 [3,51 ] .480 [12,2 ] SCALE 5.000 2. SPECIFICATION: 1) SURFACE FINISH: CONTACT: SILVER; HOLDER: Tin. 2) RATED CURRENT: 70A. A FORMAT: C-U_E-Rev_B NOTES: 1. THE REFERENCED MATERIAL SHALL BE CERTIFIED TO COMPLIANT TO THE 2002/95/EC RoHS DIRECTIVE AMENDED PER 2005/618/EC. THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. DOCUMENT NO. 10-729760-000 SHEET 1 OF 1 4 PRO/ENGINEER INFORMATION N/A Pro/e Model Used: N/A REV. B 10-729760-000 .ASSEM NEXT ASSEMBLY Drawing Name: UNLESS OTHERWISE SPECIFIED SPECIFICATIONS LINEAR DIMENSIONS ARE IN INCHES TOLERANCES: .XXXX = # .0005 ANGLES= # 2 $ .XXX = # .010 .XX = # .03 .X = # .1 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 MATERIAL SPEC. N/A - QTY PROCESS SPEC. N/A - LEGENDS: =FLAG NOTE CALL OUT REFERENCE ONLY 2 PART NUMBER APPROVALS PREPARED BY ENGINEER IN CHARGE DESIGN MANAGER CHRIS LI RAN XIAO DESCRIPTION NOTE PARTS LIST DATE AMPHENOL CORPORATION CHRIS LI DESIGN ACTIVITY GROUP 10-729760-000-CUS-B 3 POS 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 07-Nov-13 C & I THIRD ANGLE PROJECTION R4 3.6MM RADSOK PCB MOUNT ASSEMBLY SIZE C SCALE: CAGE CODE 77820 8.0 REF: DOCUMENT NO. 10-729760-000 N/A REV. B SHEET 1 OF 1 1 U A