10-730605-002

Amphenol ® Tru-Loc® Splitter Amphenol Industrial Tru-Loc® Splitter for Harsh Environments Amphenol Industrial introduces a Splitter connector complimentary to its Tru-Loc® family of products. The Tru-Loc® Splitter is designed to take a single 6-Way Tru-Loc® Plug and split the signal or power into two identical 6-Way Tru-Loc Plugs without degradation or intermittency. The Tru-Loc® Splitter features a molded thermoplastic body resistant to many fluids, including diesel fuel making this series ideal for harsh environments. True to the series, the Tru-Loc® Splitter is vibration resistant to 32 grms, IP67 rated and can withstand operating temperatures up to 150°C. Amphenol’s Splitter offers a means to combine many sensors into a single Engine Control Unit. The Splitter effectively branches a single six-circuit connector harness into two individual sixcircuit connector harnesses while maintaining a matched impedance of 120 Ohms between the I/O power circuits and CAN circuits. The greatest benefit is being able to put both Power and CAN into a single connector harness reducing the number of connectors and harnesses produced by 2x for the CAN application. Amphenol Industrial offers a 6-Way Plug with contacts for either 16AWG or 20AWG wire and a 6-Way Terminating Resistor Plug - fitted with a 120 Ohm resistor for use at the end of the bus. Features: • • • • • • Ingress Protection – IP67 rated Gold Plated 1.5mm Pin Contacts Resilient up to 32 grms vibration Dielectric Withstanding Voltage – 1600 Vac RMS Matched Impedance 120 Ohms, 2 pairs Operating Temperature -40°C to 150°C www.amphenol-industrial.com IDS-83 Material Specification ® Plug with RADSOK Socket Contacts Plug Body Wire Seal Main Joint Seal Socket Contact Nylon Silicone Fluoroelastomer Copper Alloy w/ Stainless Steel Hood Receptacle with Pin Contacts Receptacle Body Pin Contact Nylon Copper Alloy Electrical Specifications Dielectric Withstanding Voltage (Test Voltage) Current Rating Insulation Resistance 1600 Vac RMS 13 amp (DC) (16 AWG Cable) 100 M Ohms Mechanical Specifications Connector Mating Force Contact Retention Vibration Operating Temperature Range Ingress Protection Durability (Mating Cycle)