10120818-001C-TRLF

BOARD/WIRE-TO-BOARD CONNECTORS SERIAL-ATTACHED SCSI (SAS) CONNECTORS OVERVIEW The 29-position, SAS receptacle and plug connectors enable the implementation of the high-speed, Serial Attached SCSI (SAS) hard disk drive (HDD) interface that is replacing the SCSI drive connection in enterprise storage applications in servers and storage systems. This range conforms to SFF8482, SFF8680 and is capable of meeting up to 12Gb/s. The SAS connector system is designed to support hot plugging and blind mating of HDDs. Staggered contact lengths provide sequential mating of contacts to enable hot plugging. Molded guide posts provide angled lead-in to compensate for connector misalignment, allowing the device plug and the receptacle to self-align during the mating process. Most connectors also feature stamped retention clips that provide additional mechanical strength for robust PCB attachment. FCI also offers wide-base housing options on vertical backplane receptacles for even more stability. The high-speed, serial interface is designed to support differential signaling, initially at speeds of 3Gb/s and evolving to 12Gb/s. A SAS receptacle accepts either SAS or SATA (Serial ATA) drives, giving the system manufacturer the option to plug either drive to a backplane. Because both technologies have similiar electrical interfaces, users have the choice of deploying costeffective SATA drives for bulk storage or higher-performance SAS drives for mission-critical applications. FCI offers a wide range of SAS plug and receptacle connectors for enterprise applications. Vertical and Right Angle connector configurations provide options for use in servers, server or storage blades, storage backplanes, HDD carriers and HDDs. FEATURES BENEFITS • Connector retainers • Provide additional mechanical strength after soldering • Staggered contact lengths • Provide sequential mating of contacts to enable hot plugging • Molded guide posts • Provides lead-in to compensate for connector misalignment • Vertical and Right Angle connector configurations • Allows application in Servers, Storage Backplanes, HDD carriers or HDDs • High speed serial interface is designed to support differential signaling • Support higher data rates transmission up to 12Gb/S SERIAL-ATTACHED SCSI (SAS) CONNECTORS SAS VERTICAL RECEPTACLES FEATURES & BENEFITS • For high-speed serial storage interfaces of up to 12 Gb/s • Typically used for storage backplane or HDD carrier applications • Options for through-hole solder, press fit, surface mount (SMT), or hybrid (combination of SMT and TM leads) termination allow engineers to select the termination technique best suited to their design • Wide-base housing options provide additional stability Termination Type Performance Power Port 2 Retainers Port 1 SMT Locators ForkHarpoon Blade lock Other Features Part Number 12Gb/s SMT √ √ Same footprint as 6Gb/s 10031567 10120818 12Gb/s SMT √ √ Shorter soldertails 10120909 12Gb/s SMT √ 12Gb/s SMT 12Gb/s SMT 12Gb/s 10120998 √ √ Wide base, various locator lengths available Wide base √ √ Wide base √ Thru-hole, staggered √ SMT √ 10122272# 10123000# 10120863# √ 10125340 √ 10018182* √ Wide base 10038064* Wide base (full length), 10045782* various width 10031077* 12Gb/s Press-fit, in-line footprint 6Gb/s Thru-hole, in-line footprint √ 6Gb/s Press-fit, staggered footprint √ 6Gb/s Press-fit, staggered footprint 6Gb/s 6Gb/s Press-fit, in-line footprint Signals Thru-hole, :SMT SMT staggered Ground: Thru-hole SMT 6Gb/s SMT √ √ 10031567* 6Gb/s SMT √ √ 10036355* 6Gb/s SMT √ √ 17.85mm extended height 10038334* 6Gb/s SMT √ √ Wide base 10076579* √ √ 10077259* √ 10036312* 6Gb/s 6Gb/s Thru-hole, staggered SMT Signals: SMT Ground: Thru-hole √ √ √ √ 6Gb/s 6Gb/s SMT √ # connector mounts to PCB layout defined in SFF-8680 specification For more information, please contact: Communications@fci.com or visit us at www.fci.com √ √ √ √ Wide base 10036876* √ √ Wide base 10039845* √ Wide base 10123071* * connector mounts to PCB layout defined in SFF-8482 specification Disclaimer Please note that the above information is subject to change without notice. SERIAL-ATTACHED SCSI (SAS) CONNECTORS SAS RIGHT ANGLE RECEPTACLES FEATURES & BENEFITS • Address server blade, storage blade, embedded systems, or HDD carrier applications • Surface mount (SMT) termination • A receptacle with 7.07mm offset from the surface of the carrier board provides 4.7mm nominal clearance for components to be mounted beneath an installed 2.5in. hard drive Performance Termination Type Offset from Surface of Carrier PCB* SMT Retainers Fork-lock 12Gb/s SMT 2.85mm √ 12Gb/s SMT 0.35mm √ √ 6Gb/s SMT 0.35mm √ 6Gb/s SMT 0.93mm 6Gb/s SMT 7.07mm √ Blade Locators Other Features Part Number √ 10124274 √ √ Same footprint as 10123371 6Gb/s 10035202 √ √ √ 10035202 √ √ √ √ 10036587 √ Extended Height 10044002 *Dimension measured from the PCB surface to the centerline of the molded guide posts on the receptacle connector. SAS VERTICAL HEADERS FEATURES & BENEFITS • For high-speed serial storage interfaces of up to 12 Gb/s • Address server blade, storage blade, embedded systems, or HDD carrier applications • Surface mount (SMT) termination Retainers Rivet Holes Part Number Performance Termination Type 12Gb/s SMT √ 10129880 12Gb/s SMT √ 10126428 6Gb/s SMT √ 10031193 6Gb/s SMT √ 3Gb/s SMT For more information, please contact: Communications@fci.com or visit us at www.fci.com SMT Fork-lock 10041724 √ 10045105 Disclaimer Please note that the above information is subject to change without notice. SERIAL-ATTACHED SCSI (SAS) CONNECTORS SAS RIGHT ANGLE HEADERS FEATURES & BENEFITS • For high-speed serial storage interfaces of up to 12 Gb/s • Address server blade, storage blade, embedded systems, or HDD carrier applications • A receptacle with 7.07mm offset from the surface of the carrier board provides 4.7mm nominal clearance for components to be mounted beneath an installed 2.5” hard drive Performance Termination Type Offset from Surface of Carrier PCB* Retainers SMT Fork-lock √ 12Gb/s SMT -0.80mm 12Gb/s Straddle Mount 2.64mm 6Gb/s SMT 0.20mm √ 6Gb/s SMT -0.20mm √ 6Gb/s SMT -0.80mm Other Features Part Number Same footprint as 6Gb/s 10034524 10129900 10124928 10099439 10098678 √ Note: “-ve” mean that the connector is below the PCB sitting surface. “+ve” mean that the connector is above the PCB sitting surface. For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. 10034524 SERIAL-ATTACHED SCSI (SAS) CONNECTORS 12GB/S SAS INTERPOSER CARDS/ PADDLE CARDS SAS interposer cards/ paddle cards are typically placed between the Hard Disk Drive (HDD) and backplane within a storage system. It facilitates data translation and HDD system monitoring or upgrading. Each card consists of one header and one receptacle and it comes with Vertical or Right angle options. FCI developed the portfolio of 12Gb/s SAS connectors addressing the needs of interposer cards as shown in the following diagrams. 12G VT Receptacle PN: 10120818 VT Demo Board 12G VT Header PN: 10129880 12G RA Receptacle PN: 10123371 RA Demo Board 12G RA Header PN: 10129900 For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. SERIAL-ATTACHED SCSI (SAS) CONNECTORS TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Contact Base metal: Copper Alloy • FCI Product specification: • Contact Area finish: Gold over Nickel • 6G SAS: GS-12-282 (29P SAS), GS-12-294 (32P-4lane SAS) • 12G SAS: GS-12-1120 • Solder Area finish: Tin over Nickel • Retainer Clip Base Metal: Copper Alloy • Retainer Finish: Tin over Nickel • SFF-8482 Specification for Unshielded Dual Port Serial Attachment Connector • Housing: High-Temperature Thermoplastic (UL 94V-0); Black APPROVALS AND CERTIFICATIONS • UL ELECTRICAL PERFORMANCE PACKAGING • Contact Resistance: 30mΩ max. initial; 15mΩ max. change after test • Tray • Current Rating: 1.5A min. per contact with temperature rise not exceeding 30°C • Tube • Tape-on-reel (available upon request) ENVIRONMENTAL • Humidity: 96 hours at 40°C with 90-95% relative humidity. Per EIA 364-31, Method II, test condition A TARGET MARKETS/APPLICATIONS • Thermal Shock: 10 cycles between -55°C and +85°C Per EIA 364-32, test condition I • Data • Servers • Server and storage blades • External storage systems • HDDs • HDD carriers • Mixed Flowing Gas: Expose 1/2 samples unmated for 7 days and then mated for 7 additional days; the other 1/2 samples are exposed mated for 14 days. Per EIA 364-65, class II A • Communications • Processor and storage blades • Mezzanine cards MECHANICAL PERFORMANCE • Industrial, Instrumentation & Medical • Embedded system boards • Temperature Life: 85°C for 500 hours. Per EIA 364-17 test condition III, method A • Durability: 500 mating cycles* • Mating Force: 50 N max./45 N max. (32P-4lane SAS) • Unmating Force: 5 N min./4.5 N min. (32P-4lane SAS) BWBSAS0415EA4 *For higher durability cycling application, please contact FCI for alternatives. For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice.