10137482-001LF

eHPCE® Enhanced High Power Card Edge Connectors CLASSIC HPCE® WITH ENHANCED PERFORMANCE eHPCE® connectors offer a 15% increase in power density with the same footprint as classic HPCE®. The all-new power contact design offers lower contact resistance and higher current carrying capacity compared to classic HPCE® connectors. eHPCE® connectors are designed to extend the life of power supplies using card edge output power connectors. §§Same mating footprint as classic HPCE® §§Enhanced housing design §§GCS® plated contacts deliver lower resistance than gold §§Maximum continuous operating temperature increased TARGET MARKETS to +85°C §§Low-halogen housing material §§Vertical, right angle and straddle mount configurations available FEATURES BENEFITS §§GCS® plating technology §§Provides lower resistance §§Current rating up to 42A per contact at 30°C temperature §§Higher performance with same mating footprint as classic rise in still air §§20% thicker contact material HPCE® §§Enables 15% increase in power density §§50% more points of contact §§Enhanced housing design §§Better mechanical alignment and increased robustness §§Low-halogen housing §§Meets JEDEC JS709 Electronic Industry Standard §§Vertical, right angle and straddle mount configurations §§Suitable for a wide variety of application requirements available §§High temperature thermoplastic housing www.amphenol-icc.com §§Wide operating temperature from -55°C to +105°C Amphenol Information Communications and Commercial Products eHPCE® Enhanced High Power Card Edge Connectors TECHNICAL INFORMATION MATERIAL SPECIFICATIONS §§ Housing: High Temperature Thermoplastic, §§ Product Specification: GS-12-1362 UL 94 V-0, Blue §§ Application Specification: GS-20-0469 §§ Terminal: High Conductivity Copper Alloy PACKAGING §§ Contact Area §§ Trays §§ Power: GCS® plating over Nickel TEMPERATURE RISE CURVE §§ Signal: GXT® plating over Nickel MECHANICAL PERFORMANCE §§ Contact Wipe Distance: 4.8mm (power), 3.5mm (signal) §§ Durability: 200 mating cycles §§ Mating Force: 10N per Ultra-power contact, 5N per Mid-power contact ELECTRICAL PERFORMANCE §§ Current Rating: Up to 42A per contact TARGET MARKETS/APPLICATIONS (30°C temperature rise in still air) §§ Operating Voltage: 250V (power), 30V (signal) §§ Dielectric Withstanding Voltage: 1000V ENVIRONMENTAL Datacom/Networking Equipment Switches Telecom Industrial PCs Industrial Controls & Instruments §§ Operating Temperature: -55°C to +105°C §§ RoHS Information: this product is compatible according to the European Union Directive 2011/65/EU Medical PART NUMBERS Description Part Numbers eHPCE® right angle, 22MP16S 10139371-2216GLF eHPCE vertical, press-fit, 16MP28S 10141274-001LF eHPCE® vertical, press-fit, 6MP12S 10141274-002LF PWREHPCE1117EA4 ® www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice.